Não consigo ver eth1 [RESOLVIDO]

fabiokalled
(usa Debian)

Enviado em 14/05/2012 - 10:02h

Executei estes comandos mas não estou entendo pq minha placa de rede eth1 não sobe e não aparece.

root@ServidorCRMB:/etc/init.d# lspci -s 11:00.0 -v
11:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
Flags: medium devsel
I/O ports at 2000 [size=512]
Memory at fc500000 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2


root@ServidorCRMB:/etc/init.d# lspci -s 00:19.0 -v
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Lenovo Device 3048
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at fc600000 (32-bit, non-prefetchable) [size=128K]
Memory at fc627000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1820 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e