o boot ta mtooo lento

1. o boot ta mtooo lento

Xinobio
xinobio

(usa Fedora)

Enviado em 24/06/2009 - 20:45h

pessoal, o boot do meu fedora 11 tava otimo, mto rapido. quando foi hj quando fui ligar o pc, demorou 2 minutos pra iniciar o fedora!! alguem sabe oq pode ser ?


  


2. Re: o boot ta mtooo lento

Genesco Sousa
gesousa

(usa Ubuntu)

Enviado em 24/06/2009 - 22:54h

veja se ocorre de novo... há no sistema ext3 uma checagem do sistema depois que a maquina é reiniciada determinadas vezes.. isso demora um pouco...

não lembro do fedora... no ubuntu, quando for assim , entro no terminal 1 (ctrl+alt+f1) para ver o que está ocorrendo na hora do boot.




3. o boot ta mtooo lento

Edwal F. Paiva Filho
nicolo

(usa Ubuntu)

Enviado em 25/06/2009 - 10:06h

Boot muito lentos repentinos podem ter causas variadas.
Seria útil verificar a configuração da CMOS -BIOS da máquina.
A batria da placa mãe pode estar descarregada e perder a configuração.
POde ser o sistema de arquivos.
Precisa verificar o que passa na tela e ver onde está agarrando no boot.
Tive um problema no Ubuntu 9.04 e era o kernel bichado. A atualização do kerenel acabou com o problema.
Seria útil verificar em outro boot, se existe se o comportamento é do Fedora ou da máquina como um todo.
Um mal contato nos encaixes de memórias ou placas ou cabos pode ser a fonte do problema.


4. Re: o boot ta mtooo lento

j g meinhardt
meinhardt_jgbr

(usa Debian)

Enviado em 25/06/2009 - 11:38h

A maneira mais fácil e indolor para verificar isto, será bootear de novo e confirmar se ocorre a mesma demora.

Como foi comentado em post acima depois de um determinado número de inicializações o sistema gatilha automaticamente uma verificação da integridade do sistema de arquivos. Isto normalmente toma algum tempo, dependendo obviamente do tamanho da partição e do volume de dados gravado. Pode ocorrer também quando o sistema detecta algum erro por desligamento não adequado. No próximo boot, pode aparecer algum problema e isto também pode gatilhar verificação do sistema.

Por isto, re-booteando você confirma que foi apenas verificação de rotina ou se eventualmente ocorreu algum outro problema. Dependendo disto haverá que pesquisar as outras causas prováveis.


5. >>

Xinobio
xinobio

(usa Fedora)

Enviado em 25/06/2009 - 16:56h

pessoal, primeiramente obrigado pela ajuda, e eu liguei o note novamente umas 5 vezes e continua lento, dessa vez durante o boot entrei no modo nao grafico e constatei o seguinte tiveram umas 2 ou 3 coisas que demoraram mto a iniciar que sao as seguintes: sendmail e sm-client e talvez o sshd. esta demorando mto pra sair dessa parte, essas informações ajudam a fazer algo para acabar com o problema ? mais 2 informações que tenho sao as seguintes: aconteceu a lentidao depois que eu instalei o xampp(apache,mysql,php) e um cara me falou pra verificar /var/log/dmesg, e esta aki:


Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29.4-167.fc11.i686.PAE ([email protected]) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Wed May 27 17:28:22 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
total RAM coverred: 2039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 377fe000 @ 7000-e000
Using x86 segment limits to approximate NX protection
RAMDISK: 37cf8000 - 37fef9ce
Allocated new RAMDISK: 00100000 - 003f79ce
Move RAMDISK from 0000000037cf8000 - 0000000037fef9cd to 00100000 - 003f79cd
ACPI: RSDP 000F7B40, 0024 (r2 Compal)
ACPI: XSDT 7F6D7CC4, 0094 (r1 Compal CRESTLNE 6040000 LTP 0)
ACPI: FACP 7F6DFBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7F6D9B51, 600D (r2 Compal CRESTLNE 6040000 INTL 20061109)
ACPI: FACS 7F6E2FC0, 0040
ACPI: APIC 7F6DFCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: HPET 7F6DFD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7F6DFD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7F6DFDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
ACPI: TMOR 7F6DFDD4, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: SLIC 7F6DFDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
ACPI: APIC 7F6DFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7F6DFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7F6D9502, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 7F6D8E70, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 7F6D82E4, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 7F6D823E, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 7F6D7D58, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
1150MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 0000a000 - 00010f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000a34594] TEXT DATA BSS ==> [0000400000 - 0000a34594]
#4 [0000a35000 - 0000a3f000] INIT_PG_TABLE ==> [0000a35000 - 0000a3f000]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#7 [0000100000 - 00003f79ce] NEW RAMDISK ==> [0000100000 - 00003f79ce]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
found SMP MP-table at [c00f7bc0] 000f7bc0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f6d0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f6d0
On node 0 totalpages: 521839
free_area_init_node: node 0, pgdat c08bdb80, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2302 pages used for memmap
HighMem zone: 292308 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 45056 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761
Kernel command line: ro root=UUID=dbe8c5b1-aba1-4598-8431-ade283159973 rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1828.609 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 10438720 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 2049548k/2087744k available (3179k kernel code, 36976k reserved, 1935k data, 436k init, 1178440k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0906000 - 0xc0973000 ( 436 kB)
.data : 0xc071ae6a - 0xc08feb78 (1935 kB)
.text : 0xc0400000 - 0xc071ae6a (3179 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.21 BogoMIPS (lpj=1828609)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18381 entries in 73 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3657.32 BogoMIPS (lpj=1828660)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7314.53 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3228 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1064 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 19:27:35 Date: 06/25/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8604000-0xf86043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8400000-0xf8403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8604400-0xf86047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
pci 0000:00:1f.2: reg 14 io port: [0x18f4-0x18f7]
pci 0000:00:1f.2: reg 18 io port: [0x18f8-0x18ff]
pci 0000:00:1f.2: reg 1c io port: [0x18f0-0x18f3]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xf0000000-0xf000ffff]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xb8000000-0xbbffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc8000000-0xc9ffffff]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xf8200000-0xf8200fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: bridge 32bit mmio: [0xf8200000-0xf82fffff]
pci 0000:0e:06.0: reg 10 32bit mmio: [0xf8300000-0xf83007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10 32bit mmio: [0xf8300800-0xf83008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10 32bit mmio: [0xf8300c00-0xf8300cff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:0e:06.3: reg 10 32bit mmio: [0xf8301000-0xf83010ff]
pci 0000:0e:06.3: supports D1 D2
pci 0000:0e:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xf83fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0xff00-0xff7f has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0x4000-0x4fff
pci 0000:00:1c.2: MEM window: 0xf4000000-0xf7ffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000fc000000-0x000000fdffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.3: IO window: 0x5000-0x5fff
pci 0000:00:1c.3: MEM window: 0xb8000000-0xbbffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000c8000000-0x000000c9ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a
pci 0000:00:1c.4: IO window: disabled
pci 0000:00:1c.4: MEM window: disabled
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf8200000-0xf82fffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xf8300000-0xf83fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff]
pci_bus 0000:02: resource 2 mem: [0xcc000000-0xcdffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf3ffffff]
pci_bus 0000:04: resource 2 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:06: resource 3 mem: [0x0-0x0]
pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:08: resource 1 mem: [0xb8000000-0xbbffffff]
pci_bus 0000:08: resource 2 mem: [0xc8000000-0xc9ffffff]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:0a: resource 0 mem: [0x0-0x0]
pci_bus 0000:0a: resource 1 mem: [0x0-0x0]
pci_bus 0000:0a: resource 2 mem: [0x0-0x0]
pci_bus 0000:0a: resource 3 mem: [0x0-0x0]
pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
pci_bus 0000:0c: resource 1 mem: [0xf8200000-0xf82fffff]
pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
pci_bus 0000:0e: resource 0 mem: [0x0-0x0]
pci_bus 0000:0e: resource 1 mem: [0xf8300000-0xf83fffff]
pci_bus 0000:0e: resource 2 mem: [0x0-0x0]
pci_bus 0000:0e: resource 3 io: [0x00-0xffff]
pci_bus 0000:0e: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3038k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1245958055.516:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1708
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7F6D8BB2, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7F6D8543, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F6D8DA8, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7F6D8B2D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata1.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD1600BEVS-22UST0, 01.01A01, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-deve[email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Marking TSC unstable due to TSC halts in idle
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 13:819:496
Initalizing network drop monitor service
Freeing unused kernel memory: 436k freed
Write protecting the kernel read-only data: 1468k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-2: new high speed USB device using ehci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 30 for MSI/MSI-X
usb 1-2: New USB device found, idVendor=04f2, idProduct=b018
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: USB 2.0 Camera
usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-2: SerialNumber: SN0001
usb 1-2: configuration #1 chosen from 1 choice
psmouse serio1: ID: 10 00 64<6>elantech.c: assuming hardware version 1, firmware version 2.4
elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64.
Clocksource tsc unstable (delta = -123480848 ns)
[drm] TV-13: set mode NTSC 480i 0
allocated 1280x800 fb: 0x007df000, bo f601e660
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
[drm] LVDS-8: set mode 1280x800 15
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:0a: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1245958060.393:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 124471 rules.
SELinux: 8192 avtab hash slots, 124471 rules.
SELinux: 8 users, 11 roles, 2724 types, 127 bools, 1 sens, 1024 cats
SELinux: 74 classes, 124471 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1245958060.659:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 141
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ACPI: WMI: Mapper loaded
cfg80211: Calling CRDA to update world regulatory domain
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
input: PC Speaker as /devices/platform/pcspkr/input/input8
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
tg3.c:v3.97 (December 10, 2008)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: wake-up capability disabled by ACPI
tg3 0000:04:00.0: PME# disabled
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:59:34:5b
eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 31 for MSI/MSI-X
firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
wmaster0 (iwl3945): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-3945-rs'
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI version 1.10
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3507: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3511: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3515: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3516: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3524: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
wlan0 (iwl3945): not using net_device_ops yet
type=1400 audit(1245958068.266:4): avc: denied { read } for pid=1077 comm="ifconfig" name="mls" dev=selinuxfs ino=12 scontext=system_u:system_r:ifconfig_t:s0-s0:c0.c1023 tcontext=system_u:object_r:security_t:s0 tclass=file
cfg80211: Calling CRDA for country: BR
cfg80211: Regulatory domain changed to country: BR
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
firewire_core: created device fw0: GUID 00023f79b34002c4, S400
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda2, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
swap_cgroup: uses 1028 bytes of vmalloc for pointer array space and 1052672 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 1052664k swap on /dev/sda3. Priority:-1 extents:1 across:1052664k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts


vlww!






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner
Linux banner

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts