Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

IUseLinux
(usa Slackware)

Enviado em 28/11/2016 - 23:41h

Já fiz várias coisas antes ele até via as redes mas agora nem isso , é não é só wifi até com pendrive estou tendo problemas para montar , ou novato me ajudem. Eu uso o parrot e quando fui mudar pro lubuntu , instalar o ISO no pen drive também não foi.

clodoaldops
(usa Linux Mint)

Enviado em 28/11/2016 - 23:58h

Poste saída comando lspci

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 09:30h

00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

clodoaldops
(usa Linux Mint)

Enviado em 29/11/2016 - 09:47h

-não aparece saída network-controller referente a sua wifi
-a linha ethernet-controller é referente a placa de rede e está ok
-mas deveria ter a linha da wifi como no meu notebook que tem wifi realtek
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
-sua wifi funciona com algum sistema operacional linux ou windows ???

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 09:50h

Funcionava no windows ,no meu android, e em iphone de meus amigos ,funciona em qualquer coisa que nao seja meu notebook com linux

clodoaldops
(usa Linux Mint)

Enviado em 29/11/2016 - 10:07h

-wifi está ligada?
-led indicador de wifi está aceso?
-poste saída comando: sudo rfkill list all

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 10:19h

De acordo com o wicd o wifi esta ligado
acredito que todos os leds estao ligados que sao 2 acredito,exceto o do lado do carregador.
saida rfkill list all

0: ideapad_wlan: Wireless LAN

	Soft blocked: no

	Hard blocked: no

1: ideapad_bluetooth: Bluetooth

	Soft blocked: no

	Hard blocked: no

2: hci0: Bluetooth

	Soft blocked: no

	Hard blocked: no

 

clodoaldops
(usa Linux Mint)

Enviado em 29/11/2016 - 12:56h

-sua wifi foi identificada e não está bloqueada
-clique no icone de rede ao lado do relogio, escolha uma rede , digite a senha e conecte-se

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 18:44h

O problema vem ai, me falaram para desintalar o network-manager e instlar o wicd,que ai resolvia, entao o fiz, mas agora o wicd nao ve meu wifi.

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 20:43h

ja dei um dmesg tambem e este e o resultado

[    0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22

[    0.000000] Linux version 4.8.0-parrot-amd64 (devel@kali.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.5-2parrot0 (2016-11-20)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-parrot-amd64 root=UUID=1925f9d1-9aa2-4930-a656-6267bf65c8e7 ro initrd=/install/gtk/initrd.gz noautomount quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64

[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64

[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.

[    0.000000] x86/fpu: Using 'eager' FPU context switches.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007079bfff] usable

[    0.000000] BIOS-e820: [mem 0x000000007079c000-0x000000007079cfff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000007079d000-0x00000000707c6fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000707c7000-0x0000000070878fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000070879000-0x0000000071178fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000071179000-0x000000008738dfff] usable

[    0.000000] BIOS-e820: [mem 0x000000008738e000-0x0000000087d7dfff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable

[    0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000088800000-0x000000008b7fffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001737fffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.8 present.

[    0.000000] DMI: LENOVO 80UG/Toronto 4A2, BIOS 0XCN23WW 03/21/2016

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x173800 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0000000000 mask 7E00000000 write-back

[    0.000000]   1 base 0087FFF000 mask 7FFFFFF000 uncachable

[    0.000000]   2 base 0088000000 mask 7FF8000000 uncachable

[    0.000000]   3 base 0090000000 mask 7FF0000000 uncachable

[    0.000000]   4 base 00A0000000 mask 7FE0000000 uncachable

[    0.000000]   5 base 00C0000000 mask 7FC0000000 uncachable

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  

[    0.000000] e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8a3e800fe1b0]

[    0.000000] Base memory trampoline at [ffff8a3e80098000] 98000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] BRK [0x169d49000, 0x169d49fff] PGTABLE

[    0.000000] BRK [0x169d4a000, 0x169d4afff] PGTABLE

[    0.000000] BRK [0x169d4b000, 0x169d4bfff] PGTABLE

[    0.000000] BRK [0x169d4c000, 0x169d4cfff] PGTABLE

[    0.000000] BRK [0x169d4d000, 0x169d4dfff] PGTABLE

[    0.000000] BRK [0x169d4e000, 0x169d4efff] PGTABLE

[    0.000000] BRK [0x169d4f000, 0x169d4ffff] PGTABLE

[    0.000000] BRK [0x169d50000, 0x169d50fff] PGTABLE

[    0.000000] BRK [0x169d51000, 0x169d51fff] PGTABLE

[    0.000000] BRK [0x169d52000, 0x169d52fff] PGTABLE

[    0.000000] BRK [0x169d53000, 0x169d53fff] PGTABLE

[    0.000000] BRK [0x169d54000, 0x169d54fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x33884000-0x35c39fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)

[    0.000000] ACPI: XSDT 0x0000000087FC9188 0000EC (v01 LENOVO CB-01    00000001      01000013)

[    0.000000] ACPI: FACP 0x0000000087FEB000 0000F4 (v05 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: DSDT 0x0000000087FCE000 018148 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: FACS 0x0000000087F4E000 000040

[    0.000000] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: MSDM 0x0000000087FF6000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FF2000 0030D3 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FCD000 0002D4 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FCA000 002BAE (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FC8000 000B49 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x0000000087FC7000 000E73 (v02 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: DMAR 0x0000000087FC6000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: FPDT 0x0000000087FC5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001737fffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x1737fb000-0x1737fffff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001737fffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007079bfff]

[    0.000000]   node   0: [mem 0x00000000707c7000-0x0000000070878fff]

[    0.000000]   node   0: [mem 0x0000000071179000-0x000000008738dfff]

[    0.000000]   node   0: [mem 0x0000000087ffe000-0x0000000087ffefff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001737fffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001737fffff]

[    0.000000] On node 0 totalpages: 1024513

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3997 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 8554 pages used for memmap

[    0.000000]   DMA32 zone: 547428 pages, LIFO batch:31

[    0.000000]   Normal zone: 7392 pages used for memmap

[    0.000000]   Normal zone: 473088 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics memory at 0x0000000089800000-0x000000008b7fffff

[    0.000000] ACPI: PM-Timer IO Port: 0x1808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x7079c000-0x7079cfff]

[    0.000000] PM: Registered nosave memory: [mem 0x7079d000-0x707c6fff]

[    0.000000] PM: Registered nosave memory: [mem 0x70879000-0x71178fff]

[    0.000000] PM: Registered nosave memory: [mem 0x8738e000-0x87d7dfff]

[    0.000000] PM: Registered nosave memory: [mem 0x87d7e000-0x87f7dfff]

[    0.000000] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff]

[    0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88100000-0x887fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x88800000-0x8b7fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x8b800000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff]

[    0.000000] e820: [mem 0x8b800000-0xdfffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1

[    0.000000] percpu: Embedded 35 pages/cpu @ffff8a3ff3400000 s103384 r8192 d31784 u262144

[    0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1008482

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-parrot-amd64 root=UUID=1925f9d1-9aa2-4930-a656-6267bf65c8e7 ro initrd=/install/gtk/initrd.gz noautomount quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 3914772K/4098052K available (6041K kernel code, 1156K rwdata, 2780K rodata, 1368K init, 800K bss, 183280K reserved, 0K cma-reserved)

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 64.

[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8

[    0.000000] NR_IRQS:33024 nr_irqs:2048 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Detected 2300.000 MHz processor

[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.00 BogoMIPS (lpj=7680000)

[    0.000025] pid_max: default: 32768 minimum: 301

[    0.000043] ACPI: Core revision 20160422

[    0.031697] ACPI: 8 ACPI AML tables successfully acquired and loaded

 

[    0.031746] Security Framework initialized

[    0.031747] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.031752] AppArmor: AppArmor disabled by boot time parameter

[    0.031949] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.032718] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.033067] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.033071] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.033336] CPU: Physical Processor ID: 0

[    0.033336] CPU: Processor Core ID: 0

[    0.033342] mce: CPU supports 8 MCE banks

[    0.033350] CPU0: Thermal monitoring enabled (TM1)

[    0.033366] process: using mwait in idle threads

[    0.033369] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8

[    0.033370] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4

[    0.033722] Freeing SMP alternatives memory: 24K (ffffffffaca79000 - ffffffffaca7f000)

[    0.037293] ftrace: allocating 24837 entries in 98 pages

[    0.048004] smpboot: APIC(0) Converting physical 0 to logical package 0

[    0.048005] smpboot: Max logical packages: 4

[    0.048013] DMAR: Host address width 39

[    0.048014] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[    0.048019] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e

[    0.048020] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[    0.048023] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da

[    0.048024] DMAR: RMRR base: 0x00000087c7a000 end: 0x00000087c99fff

[    0.048025] DMAR: RMRR base: 0x00000089000000 end: 0x0000008b7fffff

[    0.048026] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1

[    0.048027] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[    0.048028] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.

[    0.048029] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.

[    0.049454] DMAR-IR: Enabled IRQ remapping in xapic mode

[    0.049455] x2apic: IRQ remapping doesn't support X2APIC mode

[    0.053374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.086386] TSC deadline timer enabled

[    0.086391] smpboot: CPU0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)

[    0.086394] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.

[    0.086430] ... version:                4

[    0.086430] ... bit width:              48

[    0.086430] ... generic registers:      4

[    0.086431] ... value mask:             0000ffffffffffff

[    0.086432] ... max period:             0000ffffffffffff

[    0.086432] ... fixed-purpose events:   3

[    0.086432] ... event mask:             000000070000000f

[    0.087007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.087091] x86: Booting SMP configuration:

[    0.087093] .... node  #0, CPUs:      #1 #2 #3

[    0.338548] x86: Booted up 1 node, 4 CPUs

[    0.338550] smpboot: Total of 4 processors activated (18443.06 BogoMIPS)

[    0.359142] devtmpfs: initialized

[    0.359199] x86/mm: Memory block size: 128MB

[    0.372395] PM: Registering ACPI NVS region [mem 0x7079c000-0x7079cfff] (4096 bytes)

[    0.372396] PM: Registering ACPI NVS region [mem 0x87d7e000-0x87f7dfff] (2097152 bytes)

[    0.372479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.385688] pinctrl core: initialized pinctrl subsystem

[    0.399136] NET: Registered protocol family 16

[    0.412357] cpuidle: using governor ladder

[    0.425711] cpuidle: using governor menu

[    0.425810] Simple Boot Flag at 0x44 set to 0x1

[    0.425826] ACPI: bus type PCI registered

[    0.425827] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.452538] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.452539] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.452542] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.

[    0.452779] PCI: Using configuration type 1 for base access

[    0.465919] HugeTLB registered 1 GB page size, pre-allocated 0 pages

[    0.465920] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.512614] ACPI: Added _OSI(Module Device)

[    0.512615] ACPI: Added _OSI(Processor Device)

[    0.512616] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.512616] ACPI: Added _OSI(Processor Aggregator Device)

[    0.513928] ACPI: Executed 17 blocks of module-level executable AML code

[    0.521814] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    0.524581] ACPI: Dynamic OEM Table Load:

[    0.524617] ACPI: SSDT 0xFFFF8A3FED929000 0005FD (v02 PmRef  Cpu0Ist  00003000 INTL 20121220)

[    0.525461] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked

[    0.526660] ACPI: Dynamic OEM Table Load:

[    0.526668] ACPI: SSDT 0xFFFF8A3FEDB30C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)

[    0.527977] ACPI: Dynamic OEM Table Load:

[    0.527985] ACPI: SSDT 0xFFFF8A3FEE8A9800 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)

[    0.529062] ACPI: Dynamic OEM Table Load:

[    0.529068] ACPI: SSDT 0xFFFF8A3FED928C00 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)

[    0.531485] ACPI : EC: EC started

[    0.619473] ACPI: Interpreter enabled

[    0.619521] ACPI: (supports S0 S3 S4 S5)

[    0.619522] ACPI: Using IOAPIC for interrupt routing

[    0.619562] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.636081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

[    0.636085] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.638710] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

[    0.640509] PCI host bridge to bus 0000:00

[    0.640511] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.640512] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.640513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.640514] pci_bus 0000:00: root bus resource [mem 0x8b800000-0xdfffffff window]

[    0.640515] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]

[    0.640516] pci_bus 0000:00: root bus resource [bus 00-fe]

[    0.640524] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000

[    0.641215] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000

[    0.641224] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]

[    0.641229] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]

[    0.641233] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]

[    0.641993] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330

[    0.642012] pci 0000:00:14.0: reg 0x10: [mem 0xa1100000-0xa110ffff 64bit]

[    0.642084] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.642763] pci 0000:00:14.0: System wakeup disabled by ACPI

[    0.642804] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000

[    0.642823] pci 0000:00:14.2: reg 0x10: [mem 0xa112a000-0xa112afff 64bit]

[    0.643567] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000

[    0.643589] pci 0000:00:16.0: reg 0x10: [mem 0xa112b000-0xa112bfff 64bit]

[    0.643667] pci 0000:00:16.0: PME# supported from D3hot

[    0.644380] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601

[    0.644395] pci 0000:00:17.0: reg 0x10: [mem 0xa1128000-0xa1129fff]

[    0.644403] pci 0000:00:17.0: reg 0x14: [mem 0xa112e000-0xa112e0ff]

[    0.644411] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]

[    0.644419] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]

[    0.644427] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]

[    0.644435] pci 0000:00:17.0: reg 0x24: [mem 0xa112c000-0xa112c7ff]

[    0.644479] pci 0000:00:17.0: PME# supported from D3hot

[    0.645188] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400

[    0.645254] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.645942] pci 0000:00:1c.0: System wakeup disabled by ACPI

[    0.646011] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100

[    0.646809] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000

[    0.646821] pci 0000:00:1f.2: reg 0x10: [mem 0xa1124000-0xa1127fff]

[    0.647570] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300

[    0.647594] pci 0000:00:1f.3: reg 0x10: [mem 0xa1120000-0xa1123fff 64bit]

[    0.647629] pci 0000:00:1f.3: reg 0x20: [mem 0xa1110000-0xa111ffff 64bit]

[    0.647681] pci 0000:00:1f.3: PME# supported from D3hot D3cold

[    0.648405] pci 0000:00:1f.3: System wakeup disabled by ACPI

[    0.648447] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500

[    0.648494] pci 0000:00:1f.4: reg 0x10: [mem 0xa112d000-0xa112d0ff 64bit]

[    0.648563] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]

[    0.649382] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000

[    0.649401] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]

[    0.649429] pci 0000:01:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]

[    0.649447] pci 0000:01:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]

[    0.649545] pci 0000:01:00.0: supports D1 D2

[    0.649546] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.649597] pci 0000:01:00.0: System wakeup disabled by ACPI

[    0.662703] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.662713] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]

[    0.662723] pci 0000:00:1c.0:   bridge window [mem 0xa1000000-0xa10fffff]

[    0.664143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)

[    0.664246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664394] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664443] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664492] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.664780] platform MSFT0101:00: failed to claim resource 1

[    0.664843] acpi MSFT0101:00: platform device creation failed: -16

[    0.665013] ACPI: Enabled 5 GPEs in block 00 to 7F

[    0.665054] ACPI : EC: EC stopped

[    0.665145] ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data = 0x62

[    0.665145] ACPI : EC: EC started

[    0.753031] vgaarb: setting as boot device: PCI:0000:00:02.0

[    0.753032] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    0.753034] vgaarb: loaded

[    0.753034] vgaarb: bridge control possible 0000:00:02.0

[    0.753093] PCI: Using ACPI for IRQ routing

[    0.781323] PCI: pci_cache_line_size set to 64 bytes

[    0.781364] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]

[    0.781365] e820: reserve RAM buffer [mem 0x7079c000-0x73ffffff]

[    0.781366] e820: reserve RAM buffer [mem 0x70879000-0x73ffffff]

[    0.781367] e820: reserve RAM buffer [mem 0x8738e000-0x87ffffff]

[    0.781368] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]

[    0.781368] e820: reserve RAM buffer [mem 0x173800000-0x173ffffff]

[    0.781554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.781558] hpet0: 8 comparators, 64-bit 24.000000 MHz counter

[    0.783601] clocksource: Switched to clocksource hpet

[    0.789196] VFS: Disk quotas dquot_6.6.0

[    0.803660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.823762] pnp: PnP ACPI init

[    0.823861] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved

[    0.823863] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved

[    0.823864] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved

[    0.823865] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved

[    0.823867] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved

[    0.823868] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved

[    0.823869] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved

[    0.823871] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.824164] system 00:01: [io  0x2000-0x20fe] has been reserved

[    0.824165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.824743] system 00:02: [io  0x0680-0x069f] has been reserved

[    0.824744] system 00:02: [io  0xffff] has been reserved

[    0.824746] system 00:02: [io  0xffff] has been reserved

[    0.824747] system 00:02: [io  0xffff] has been reserved

[    0.824748] system 00:02: [io  0x1800-0x18fe] has been reserved

[    0.824749] system 00:02: [io  0x164e-0x164f] has been reserved

[    0.824750] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.824849] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.824884] system 00:04: [io  0x1854-0x1857] has been reserved

[    0.824885] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.824910] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.824934] pnp 00:06: Plug and Play ACPI device, IDs SYN2b58 PNP0f13 SYN0002 SYN2b00 (active)

[    0.826056] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved

[    0.826057] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved

[    0.826058] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved

[    0.826060] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved

[    0.826061] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved

[    0.826062] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.826561] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved

[    0.826562] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved

[    0.826563] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved

[    0.826565] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved

[    0.826566] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.826568] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved

[    0.826569] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved

[    0.826571] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved

[    0.826572] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.826573] system 00:08: [mem 0x8b800000-0x8b81ffff] has been reserved

[    0.826575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.826830] pnp: PnP ACPI: found 9 devices

[    0.834567] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.834579] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.834581] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]

[    0.834585] pci 0000:00:1c.0:   bridge window [mem 0xa1000000-0xa10fffff]

[    0.834592] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.834593] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.834594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.834595] pci_bus 0000:00: resource 7 [mem 0x8b800000-0xdfffffff window]

[    0.834596] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]

[    0.834597] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]

[    0.834598] pci_bus 0000:01: resource 1 [mem 0xa1000000-0xa10fffff]

[    0.936964] NET: Registered protocol family 2

[    0.957081] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.957136] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.957206] TCP: Hash tables configured (established 32768 bind 32768)

[    0.957220] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.957233] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.957276] NET: Registered protocol family 1

[    0.957287] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.958743] PCI: CLS 64 bytes, default 64

[    0.958776] Unpacking initramfs...

[    1.570483] Freeing initrd memory: 36568K (ffff8a3eb3884000 - ffff8a3eb5c3a000)

[    1.587077] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.587080] software IO TLB [mem 0x8338e000-0x8738e000] (64MB) mapped at [ffff8a3f0338e000-ffff8a3f0738dfff]

[    1.587231] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer

[    1.587231] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[    1.587232] RAPL PMU: hw unit of domain package 2^-14 Joules

[    1.587232] RAPL PMU: hw unit of domain dram 2^-14 Joules

[    1.587233] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[    1.587233] RAPL PMU: hw unit of domain psys 2^-14 Joules

[    1.610554] futex hash table entries: 2048 (order: 5, 131072 bytes)

[    1.630306] audit: initializing netlink subsys (disabled)

[    1.630366] audit: type=2000 audit(1480447162.620:1): initialized

[    1.631082] workingset: timestamp_bits=40 max_order=20 bucket_order=0

[    1.631097] zbud: loaded

[    1.673674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    1.673831] io scheduler noop registered

[    1.673831] io scheduler deadline registered

[    1.673836] io scheduler cfq registered (default)

[    1.674134] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt

[    1.674135] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt

[    1.674138] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded

[    1.674141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.674145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.674157] intel_idle: MWAIT substates: 0x11142120

[    1.674158] intel_idle: v0.4.1 model 0x4E

[    1.674360] intel_idle: lapic_timer_reliable_states 0xffffffff

[    1.674593] GHES: HEST is not enabled!

[    1.674666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.675257] Linux agpgart interface v0.103

[    1.675291] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    1.675291] AMD IOMMUv2 functionality not available on this system

[    1.675610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    1.691469] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.691472] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.691688] mousedev: PS/2 mouse device common for all mice

[    1.692166] rtc_cmos 00:03: RTC can wake from S4

[    1.692592] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[    1.692671] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    1.692677] intel_pstate: Intel P-state driver initializing

[    1.692983] intel_pstate: HWP enabled

[    1.693147] ledtrig-cpu: registered to indicate activity on CPUs

[    1.701730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    1.770812] NET: Registered protocol family 10

[    1.790859] mip6: Mobile IPv6

[    1.790864] NET: Registered protocol family 17

[    1.790871] mpls_gso: MPLS GSO support

[    1.791566] microcode: sig=0x406e3, pf=0x80, revision=0x9e

[    1.791883] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    1.792957] registered taskstats version 1

[    1.793006] zswap: loaded using pool lzo/zbud

[    1.795364] rtc_cmos 00:03: setting system clock to 2016-11-29 19:19:23 UTC (1480447163)

[    1.795541] PM: Hibernation image not present or could not be loaded.

[    1.797943] Freeing unused kernel memory: 1368K (ffffffffac923000 - ffffffffaca79000)

[    1.797944] Write protecting the kernel read-only data: 10240k

[    1.798343] Freeing unused kernel memory: 88K (ffff8a3fe95ea000 - ffff8a3fe9600000)

[    1.804028] Freeing unused kernel memory: 1316K (ffff8a3fe98b7000 - ffff8a3fe9a00000)

[    1.820366] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.901292] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.901340] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.901346] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.901354] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.901958] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.901981] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.902727] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.902766] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.902776] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.903126] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.917014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2

[    1.917089] ACPI: Lid Switch [LID0]

[    1.917147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3

[    1.917150] ACPI: Power Button [PWRB]

[    1.917198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[    1.917200] ACPI: Power Button [PWRF]

[    1.917420] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED

[    1.918851] hidraw: raw HID events driver (C) Jiri Kosina

[    1.932053] wmi: Mapper loaded

[    1.934918] SCSI subsystem initialized

[    1.934958] ACPI: bus type USB registered

[    1.934983] usbcore: registered new interface driver usbfs

[    1.934996] usbcore: registered new interface driver hub

[    1.935195] usbcore: registered new device driver usb

[    1.936748] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.936755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    1.937866] libata version 3.00 loaded.

[    1.937868] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810

[    1.937877] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    1.938004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.938006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.938008] usb usb1: Product: xHCI Host Controller

[    1.938009] usb usb1: Manufacturer: Linux 4.8.0-parrot-amd64 xhci-hcd

[    1.938010] usb usb1: SerialNumber: 0000:00:14.0

[    1.938153] [drm] Initialized drm 1.1.0 20060810

[    1.938168] hub 1-0:1.0: USB hub found

[    1.938185] hub 1-0:1.0: 12 ports detected

[    1.941372] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    1.944341] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.944347] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    1.944390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003

[    1.944392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.944393] usb usb2: Product: xHCI Host Controller

[    1.944394] usb usb2: Manufacturer: Linux 4.8.0-parrot-amd64 xhci-hcd

[    1.944395] usb usb2: SerialNumber: 0000:00:14.0

[    1.944877] AVX2 version of gcm_enc/dec engaged.

[    1.944877] AES CTR mode by8 optimization enabled

[    1.944999] hub 2-0:1.0: USB hub found

[    1.945011] hub 2-0:1.0: 6 ports detected

[    1.946472] usb: port power management may be unreliable

[    1.947479] ahci 0000:00:17.0: version 3.0

[    1.954809] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffff9e3c80664000, 64:1c:67:80:be:19, XID 10900800 IRQ 125

[    1.954811] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    1.957809] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode

[    1.957812] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst

[    1.958315] scsi host0: ahci

[    1.958464] scsi host1: ahci

[    1.958529] ata1: SATA max UDMA/133 abar m2048@0xa112c000 port 0xa112c100 irq 124

[    1.958532] ata2: SATA max UDMA/133 abar m2048@0xa112c000 port 0xa112c180 irq 124

[    1.971016] [drm] Memory usable by graphics device = 4096M

[    1.971018] [drm] Replacing VGA console driver

[    1.972118] Console: switching to colour dummy device 80x25

[    1.977217] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    1.977218] [drm] Driver supports precise vblank timestamp query.

[    1.986799] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    1.987333] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin

[    1.987891] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)

[    1.993993] [drm] GuC firmware load skipped

[    2.273688] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.273725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.274729] ata1.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133

[    2.274734] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

[    2.275898] ata1.00: configured for UDMA/133

[    2.276406] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33

[    2.276499] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5

[    2.279001] ata2.00: configured for UDMA/33

[    2.306502] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    2.307292] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6

[    2.307379] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0

[    2.318435] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUE0N     T.02 PQ: 0 ANSI: 5

[    2.324198] usb 1-4: new high-speed USB device number 2 using xhci_hcd

[    2.574617] fbcon: inteldrmfb (fb0) is primary device

[    2.577249] usb 1-4: New USB device found, idVendor=04f2, idProduct=b57d

[    2.577252] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[    2.577254] usb 1-4: Product: EasyCamera

[    2.577256] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.

[    2.577258] usb 1-4: SerialNumber: 0001

[    2.594243] tsc: Refined TSC clocksource calibration: 2303.999 MHz

[    2.594258] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns

[    2.750817] usb 1-5: new high-speed USB device number 3 using xhci_hcd

[    2.926202] random: fast init done

[    2.937413] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129

[    2.937416] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    2.937418] usb 1-5: Product: USB2.0-CRW

[    2.937420] usb 1-5: Manufacturer: Generic

[    2.937422] usb 1-5: SerialNumber: 20100201396000000

[    2.943488] usbcore: registered new interface driver rtsx_usb

[    2.948632] psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4886]

[    3.005020] psmouse serio1: synaptics: queried min coordinates: x [1240..], y [964..]

[    3.107484] usb 1-7: new full-speed USB device number 4 using xhci_hcd

[    3.114521] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00523/0x840300/0x2a800/0x0, board id: 2847, fw id: 1887761

[    3.183179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5

[    3.295995] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360

[    3.295998] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    3.367924] [drm] RC6 on

[    3.607330] clocksource: Switched to clocksource tsc

[    3.815321] Console: switching to colour frame buffer device 170x48

[    3.837735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    3.857929] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    3.857932] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    3.857961] sd 0:0:0:0: [sda] Write Protect is off

[    3.857964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    3.857995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    3.877440] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[    3.877446] cdrom: Uniform CD-ROM driver Revision: 3.20

[    3.878169] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    3.941508]  sda: sda1 sda2 < sda5 >

[    3.942566] sd 0:0:0:0: [sda] Attached SCSI disk

[    4.483633] raid6: sse2x1   gen()  5741 MB/s

[    4.540299] raid6: sse2x1   xor()  4192 MB/s

[    4.596965] raid6: sse2x2   gen()  8130 MB/s

[    4.653633] raid6: sse2x2   xor()  5526 MB/s

[    4.710299] raid6: sse2x4   gen()  9304 MB/s

[    4.766968] raid6: sse2x4   xor()  6183 MB/s

[    4.823633] raid6: avx2x1   gen() 16020 MB/s

[    4.880302] raid6: avx2x2   gen() 18596 MB/s

[    4.936971] raid6: avx2x4   gen() 18912 MB/s

[    4.936971] raid6: using algorithm avx2x4 gen() 18912 MB/s

[    4.936972] raid6: using avx2x2 recovery algorithm

[    4.937234] xor: automatically using best checksumming function:

[    4.970298]    avx       : 19647.600 MB/sec

[    5.127774] Btrfs loaded, crc32c=crc32c-intel

[    5.442955] PM: Starting manual resume from disk

[    5.442963] PM: Hibernation image partition 8:5 present

[    5.442965] PM: Looking for hibernation image.

[    5.443288] PM: Image not found (code -22)

[    5.443292] PM: Hibernation image not present or could not be loaded.

[    6.130014] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[    6.135672] random: crng init done

[    7.430103] ip_tables: (C) 2000-2006 Netfilter Core Team

[    7.801500] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[    7.802020] systemd[1]: Detected architecture x86-64.

[    7.821214] systemd[1]: Set hostname to <parrot>.

[   10.663122] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.

[   10.665060] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   10.665128] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   10.665159] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   10.665187] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   10.665214] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   10.665242] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).

[   11.721689] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

[   11.795125] systemd-journald[253]: Received request to flush runtime journal from PID 1

[   12.082597] ACPI: AC Adapter [ADP0] (off-line)

[   12.808576] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   12.915597] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   12.915625] sr 1:0:0:0: Attached scsi generic sg1 type 5

[   12.932465] input: PC Speaker as /devices/platform/pcspkr/input/input7

[   12.975338] ACPI: Battery Slot [BAT0] (battery present)

[   13.010104] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt

[   13.087276] mei_me 0000:00:16.0: enabling device (0000 -> 0002)

[   13.155418] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8

[   13.745655] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[   13.833085] iTCO_vendor_support: vendor-support=0

[   13.834437] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[   13.834662] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)

[   13.835010] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   13.950649] Bluetooth: Core ver 2.21

[   13.950695] NET: Registered protocol family 31

[   13.950698] Bluetooth: HCI device and connection manager initialized

[   13.950709] Bluetooth: HCI socket layer initialized

[   13.950718] Bluetooth: L2CAP socket layer initialized

[   13.950738] Bluetooth: SCO socket layer initialized

[   14.082977] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.

[   14.083428] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker

[   14.083434] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   14.083439] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)

[   14.083442] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0

[   14.083445] snd_hda_codec_conexant hdaudioC0D0:    inputs:

[   14.083450] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a

[   14.083455] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19

[   14.084538] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication

[   14.130745] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

[   14.133011] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10

[   14.133335] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11

[   14.133666] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

[   14.133976] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13

[   14.134273] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14

[   14.228939] Bluetooth: HCI UART driver ver 2.3

[   14.228946] Bluetooth: HCI UART protocol H4 registered

[   14.228949] Bluetooth: HCI UART protocol BCSP registered

[   14.228953] Bluetooth: HCI UART protocol LL registered

[   14.228956] Bluetooth: HCI UART protocol ATH3K registered

[   14.228959] Bluetooth: HCI UART protocol Three-wire (H5) registered

[   14.229054] Bluetooth: HCI UART protocol Intel registered

[   14.229109] Bluetooth: HCI UART protocol BCM registered

[   14.229112] Bluetooth: HCI UART protocol QCA registered

[   14.353652] intel_rapl: Found RAPL domain package

[   14.353658] intel_rapl: Found RAPL domain core

[   14.353689] intel_rapl: Found RAPL domain uncore

[   14.353693] intel_rapl: Found RAPL domain dram

[   14.572279] usbcore: registered new interface driver btusb

[   14.622717] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2)

[   14.622727] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2

[   14.622740] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2)

[   14.832588] media: Linux media interface: v0.10

[   14.880860] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2)

[   14.880866] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2

[   14.880878] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2)

[   15.042922] Linux video capture interface: v2.00

[   15.176258] uvcvideo: Found UVC 1.00 device EasyCamera (04f2:b57d)

[   15.181209] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!

[   15.181220] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!

[   15.181226] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!

[   15.181493] input: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15

[   15.181703] usbcore: registered new interface driver uvcvideo

[   15.181705] USB Video Class driver (1.1.1)

[   16.697821] Adding 4097020k swap on /dev/sda5.  Priority:-1 extents:1 across:4097020k FS

[   19.648498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   19.648505] Bluetooth: BNEP filters: protocol multicast

[   19.648517] Bluetooth: BNEP socket layer initialized

[   20.281999] systemd[1]: apt-daily.timer: Adding 10h 31min 44.529655s random time.

[   21.765882] Netfilter messages via NETLINK v0.30.

[   22.292104] systemd[1]: apt-daily.timer: Adding 6h 1min 56.136650s random time.

[   25.151321] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   25.260460] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw

[   25.275917] r8169 0000:01:00.0 eth0: link down

[   25.275925] r8169 0000:01:00.0 eth0: link down

[   25.276013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   26.856533] r8169 0000:01:00.0 eth0: link up

[   26.856541] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   29.823637] NET: Registered protocol family 4

[   29.851568] NET: Registered protocol family 3

[   29.853160] NET: Registered protocol family 5

[   30.004209] systemd[1]: apt-daily.timer: Adding 48min 52.138922s random time.

[   30.167776] systemd[1]: apt-daily.timer: Adding 6h 15min 3.487833s random time.

[ 2598.228885] utox[2771]: segfault at 7f33237e92c5 ip 0000000000665a4d sp 00007f3339b4b750 error 4 in utox[400000+2fa000] 

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 20:45h

nem no lspci nem no dmesg achei algo com a palavra wireless ou wifi

IUseLinux
(usa Slackware)

Enviado em 29/11/2016 - 20:47h

tambem deu um lspci -nnk como alguns me falaram para analisar e este e o resultado

00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)

	Subsystem: Lenovo Skylake Host Bridge/DRAM Registers [17aa:3805]

00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)

	Subsystem: Lenovo HD Graphics 520 [17aa:3822]

	Kernel driver in use: i915

	Kernel modules: i915

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:380f]

	Kernel driver in use: xhci_hcd

	Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP Thermal subsystem [17aa:380e]

	Kernel driver in use: intel_pch_thermal

	Kernel modules: intel_pch_thermal

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:3801]

	Kernel driver in use: mei_me

	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP SATA Controller [AHCI mode] [17aa:3809]

	Kernel driver in use: ahci

	Kernel modules: ahci

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d14] (rev f1)

	Kernel driver in use: pcieport

	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP LPC Controller [17aa:380a]

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP PMC [17aa:3816]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:3815]

	Kernel driver in use: snd_hda_intel

	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)

	Subsystem: Lenovo Sunrise Point-LP SMBus [17aa:3816]

	Kernel driver in use: i801_smbus

	Kernel modules: i2c_i801

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)

	Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:3854]

	Kernel driver in use: r8169

	Kernel modules: r8169