Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

1. Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 28/11/2016 - 23:41h

Já fiz várias coisas antes ele até via as redes mas agora nem isso , é não é só wifi até com pendrive estou tendo problemas para montar , ou novato me ajudem. Eu uso o parrot e quando fui mudar pro lubuntu , instalar o ISO no pen drive também não foi.


  


2. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Clodoaldo Santos
clodoaldops

(usa Linux Mint)

Enviado em 28/11/2016 - 23:58h

Poste saída comando lspci


3. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 09:30h

00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)



4. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Clodoaldo Santos
clodoaldops

(usa Linux Mint)

Enviado em 29/11/2016 - 09:47h

-não aparece saída network-controller referente a sua wifi
-a linha ethernet-controller é referente a placa de rede e está ok
-mas deveria ter a linha da wifi como no meu notebook que tem wifi realtek
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
-sua wifi funciona com algum sistema operacional linux ou windows ???


5. Re: Lenovo ideapad 310 não conecta ao wifi

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 09:50h

Funcionava no windows ,no meu android, e em iphone de meus amigos ,funciona em qualquer coisa que nao seja meu notebook com linux


6. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Clodoaldo Santos
clodoaldops

(usa Linux Mint)

Enviado em 29/11/2016 - 10:07h

-wifi está ligada?
-led indicador de wifi está aceso?
-poste saída comando: sudo rfkill list all


7. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 10:19h

De acordo com o wicd o wifi esta ligado
acredito que todos os leds estao ligados que sao 2 acredito,exceto o do lado do carregador.
saida rfkill list all
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no



8. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Clodoaldo Santos
clodoaldops

(usa Linux Mint)

Enviado em 29/11/2016 - 12:56h

-sua wifi foi identificada e não está bloqueada
-clique no icone de rede ao lado do relogio, escolha uma rede , digite a senha e conecte-se



9. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 18:44h

O problema vem ai, me falaram para desintalar o network-manager e instlar o wicd,que ai resolvia, entao o fiz, mas agora o wicd nao ve meu wifi.


10. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 20:43h

ja dei um dmesg tambem e este e o resultado
[    0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.000000] Linux version 4.8.0-parrot-amd64 ([email protected]) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.5-2parrot0 (2016-11-20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-parrot-amd64 root=UUID=1925f9d1-9aa2-4930-a656-6267bf65c8e7 ro initrd=/install/gtk/initrd.gz noautomount quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007079bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007079c000-0x000000007079cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007079d000-0x00000000707c6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000707c7000-0x0000000070878fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070879000-0x0000000071178fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000071179000-0x000000008738dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008738e000-0x0000000087d7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088800000-0x000000008b7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001737fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 80UG/Toronto 4A2, BIOS 0XCN23WW 03/21/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x173800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0087FFF000 mask 7FFFFFF000 uncachable
[ 0.000000] 2 base 0088000000 mask 7FF8000000 uncachable
[ 0.000000] 3 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8a3e800fe1b0]
[ 0.000000] Base memory trampoline at [ffff8a3e80098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x169d49000, 0x169d49fff] PGTABLE
[ 0.000000] BRK [0x169d4a000, 0x169d4afff] PGTABLE
[ 0.000000] BRK [0x169d4b000, 0x169d4bfff] PGTABLE
[ 0.000000] BRK [0x169d4c000, 0x169d4cfff] PGTABLE
[ 0.000000] BRK [0x169d4d000, 0x169d4dfff] PGTABLE
[ 0.000000] BRK [0x169d4e000, 0x169d4efff] PGTABLE
[ 0.000000] BRK [0x169d4f000, 0x169d4ffff] PGTABLE
[ 0.000000] BRK [0x169d50000, 0x169d50fff] PGTABLE
[ 0.000000] BRK [0x169d51000, 0x169d51fff] PGTABLE
[ 0.000000] BRK [0x169d52000, 0x169d52fff] PGTABLE
[ 0.000000] BRK [0x169d53000, 0x169d53fff] PGTABLE
[ 0.000000] BRK [0x169d54000, 0x169d54fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33884000-0x35c39fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000087FC9188 0000EC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000087FEB000 0000F4 (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000087FCE000 018148 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000087F4E000 000040
[ 0.000000] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x0000000087FF6000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF2000 0030D3 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCD000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCA000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FC8000 000B49 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FC7000 000E73 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000087FC6000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000087FC5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001737fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1737fb000-0x1737fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001737fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007079bfff]
[ 0.000000] node 0: [mem 0x00000000707c7000-0x0000000070878fff]
[ 0.000000] node 0: [mem 0x0000000071179000-0x000000008738dfff]
[ 0.000000] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001737fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001737fffff]
[ 0.000000] On node 0 totalpages: 1024513
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8554 pages used for memmap
[ 0.000000] DMA32 zone: 547428 pages, LIFO batch:31
[ 0.000000] Normal zone: 7392 pages used for memmap
[ 0.000000] Normal zone: 473088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000089800000-0x000000008b7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7079c000-0x7079cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7079d000-0x707c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70879000-0x71178fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8738e000-0x87d7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87d7e000-0x87f7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x887fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88800000-0x8b7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8b800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff]
[ 0.000000] e820: [mem 0x8b800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8a3ff3400000 s103384 r8192 d31784 u262144
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008482
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-parrot-amd64 root=UUID=1925f9d1-9aa2-4930-a656-6267bf65c8e7 ro initrd=/install/gtk/initrd.gz noautomount quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3914772K/4098052K available (6041K kernel code, 1156K rwdata, 2780K rodata, 1368K init, 800K bss, 183280K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2300.000 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.00 BogoMIPS (lpj=7680000)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000043] ACPI: Core revision 20160422
[ 0.031697] ACPI: 8 ACPI AML tables successfully acquired and loaded

[ 0.031746] Security Framework initialized
[ 0.031747] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.031752] AppArmor: AppArmor disabled by boot time parameter
[ 0.031949] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.032718] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.033067] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033071] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033336] CPU: Physical Processor ID: 0
[ 0.033336] CPU: Processor Core ID: 0
[ 0.033342] mce: CPU supports 8 MCE banks
[ 0.033350] CPU0: Thermal monitoring enabled (TM1)
[ 0.033366] process: using mwait in idle threads
[ 0.033369] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.033370] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.033722] Freeing SMP alternatives memory: 24K (ffffffffaca79000 - ffffffffaca7f000)
[ 0.037293] ftrace: allocating 24837 entries in 98 pages
[ 0.048004] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.048005] smpboot: Max logical packages: 4
[ 0.048013] DMAR: Host address width 39
[ 0.048014] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.048019] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.048020] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.048023] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.048024] DMAR: RMRR base: 0x00000087c7a000 end: 0x00000087c99fff
[ 0.048025] DMAR: RMRR base: 0x00000089000000 end: 0x0000008b7fffff
[ 0.048026] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.048027] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.048028] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.048029] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.049454] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.049455] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.053374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086386] TSC deadline timer enabled
[ 0.086391] smpboot: CPU0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.086394] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.086430] ... version: 4
[ 0.086430] ... bit width: 48
[ 0.086430] ... generic registers: 4
[ 0.086431] ... value mask: 0000ffffffffffff
[ 0.086432] ... max period: 0000ffffffffffff
[ 0.086432] ... fixed-purpose events: 3
[ 0.086432] ... event mask: 000000070000000f
[ 0.087007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.087091] x86: Booting SMP configuration:
[ 0.087093] .... node #0, CPUs: #1 #2 #3
[ 0.338548] x86: Booted up 1 node, 4 CPUs
[ 0.338550] smpboot: Total of 4 processors activated (18443.06 BogoMIPS)
[ 0.359142] devtmpfs: initialized
[ 0.359199] x86/mm: Memory block size: 128MB
[ 0.372395] PM: Registering ACPI NVS region [mem 0x7079c000-0x7079cfff] (4096 bytes)
[ 0.372396] PM: Registering ACPI NVS region [mem 0x87d7e000-0x87f7dfff] (2097152 bytes)
[ 0.372479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.385688] pinctrl core: initialized pinctrl subsystem
[ 0.399136] NET: Registered protocol family 16
[ 0.412357] cpuidle: using governor ladder
[ 0.425711] cpuidle: using governor menu
[ 0.425810] Simple Boot Flag at 0x44 set to 0x1
[ 0.425826] ACPI: bus type PCI registered
[ 0.425827] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.452538] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.452539] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.452542] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.452779] PCI: Using configuration type 1 for base access
[ 0.465919] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.465920] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.512614] ACPI: Added _OSI(Module Device)
[ 0.512615] ACPI: Added _OSI(Processor Device)
[ 0.512616] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.512616] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.513928] ACPI: Executed 17 blocks of module-level executable AML code
[ 0.521814] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.524581] ACPI: Dynamic OEM Table Load:
[ 0.524617] ACPI: SSDT 0xFFFF8A3FED929000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20121220)
[ 0.525461] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.526660] ACPI: Dynamic OEM Table Load:
[ 0.526668] ACPI: SSDT 0xFFFF8A3FEDB30C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.527977] ACPI: Dynamic OEM Table Load:
[ 0.527985] ACPI: SSDT 0xFFFF8A3FEE8A9800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
[ 0.529062] ACPI: Dynamic OEM Table Load:
[ 0.529068] ACPI: SSDT 0xFFFF8A3FED928C00 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
[ 0.531485] ACPI : EC: EC started
[ 0.619473] ACPI: Interpreter enabled
[ 0.619521] ACPI: (supports S0 S3 S4 S5)
[ 0.619522] ACPI: Using IOAPIC for interrupt routing
[ 0.619562] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.636081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.636085] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.638710] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.640509] PCI host bridge to bus 0000:00
[ 0.640511] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.640512] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.640513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.640514] pci_bus 0000:00: root bus resource [mem 0x8b800000-0xdfffffff window]
[ 0.640515] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.640516] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.640524] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.641215] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.641224] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.641229] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.641233] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.641993] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.642012] pci 0000:00:14.0: reg 0x10: [mem 0xa1100000-0xa110ffff 64bit]
[ 0.642084] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.642763] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.642804] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.642823] pci 0000:00:14.2: reg 0x10: [mem 0xa112a000-0xa112afff 64bit]
[ 0.643567] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.643589] pci 0000:00:16.0: reg 0x10: [mem 0xa112b000-0xa112bfff 64bit]
[ 0.643667] pci 0000:00:16.0: PME# supported from D3hot
[ 0.644380] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.644395] pci 0000:00:17.0: reg 0x10: [mem 0xa1128000-0xa1129fff]
[ 0.644403] pci 0000:00:17.0: reg 0x14: [mem 0xa112e000-0xa112e0ff]
[ 0.644411] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087]
[ 0.644419] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b]
[ 0.644427] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.644435] pci 0000:00:17.0: reg 0x24: [mem 0xa112c000-0xa112c7ff]
[ 0.644479] pci 0000:00:17.0: PME# supported from D3hot
[ 0.645188] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.645254] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.645942] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.646011] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.646809] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.646821] pci 0000:00:1f.2: reg 0x10: [mem 0xa1124000-0xa1127fff]
[ 0.647570] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.647594] pci 0000:00:1f.3: reg 0x10: [mem 0xa1120000-0xa1123fff 64bit]
[ 0.647629] pci 0000:00:1f.3: reg 0x20: [mem 0xa1110000-0xa111ffff 64bit]
[ 0.647681] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.648405] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.648447] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.648494] pci 0000:00:1f.4: reg 0x10: [mem 0xa112d000-0xa112d0ff 64bit]
[ 0.648563] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f]
[ 0.649382] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.649401] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.649429] pci 0000:01:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]
[ 0.649447] pci 0000:01:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]
[ 0.649545] pci 0000:01:00.0: supports D1 D2
[ 0.649546] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.649597] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.662703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.662713] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.662723] pci 0000:00:1c.0: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.664143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.664246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664394] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664443] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664492] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.664780] platform MSFT0101:00: failed to claim resource 1
[ 0.664843] acpi MSFT0101:00: platform device creation failed: -16
[ 0.665013] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.665054] ACPI : EC: EC stopped
[ 0.665145] ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data = 0x62
[ 0.665145] ACPI : EC: EC started
[ 0.753031] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.753032] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.753034] vgaarb: loaded
[ 0.753034] vgaarb: bridge control possible 0000:00:02.0
[ 0.753093] PCI: Using ACPI for IRQ routing
[ 0.781323] PCI: pci_cache_line_size set to 64 bytes
[ 0.781364] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.781365] e820: reserve RAM buffer [mem 0x7079c000-0x73ffffff]
[ 0.781366] e820: reserve RAM buffer [mem 0x70879000-0x73ffffff]
[ 0.781367] e820: reserve RAM buffer [mem 0x8738e000-0x87ffffff]
[ 0.781368] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.781368] e820: reserve RAM buffer [mem 0x173800000-0x173ffffff]
[ 0.781554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.781558] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.783601] clocksource: Switched to clocksource hpet
[ 0.789196] VFS: Disk quotas dquot_6.6.0
[ 0.803660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.823762] pnp: PnP ACPI init
[ 0.823861] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.823863] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.823864] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.823865] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.823867] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.823868] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.823869] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.823871] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.824164] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.824165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.824743] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.824744] system 00:02: [io 0xffff] has been reserved
[ 0.824746] system 00:02: [io 0xffff] has been reserved
[ 0.824747] system 00:02: [io 0xffff] has been reserved
[ 0.824748] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.824749] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.824750] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.824849] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.824884] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.824885] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.824910] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.824934] pnp 00:06: Plug and Play ACPI device, IDs SYN2b58 PNP0f13 SYN0002 SYN2b00 (active)
[ 0.826056] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.826057] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.826058] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.826060] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.826061] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.826062] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.826561] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.826562] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.826563] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.826565] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.826566] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.826568] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.826569] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.826571] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.826572] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.826573] system 00:08: [mem 0x8b800000-0x8b81ffff] has been reserved
[ 0.826575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.826830] pnp: PnP ACPI: found 9 devices
[ 0.834567] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.834579] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.834581] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.834585] pci 0000:00:1c.0: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.834592] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.834593] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.834594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.834595] pci_bus 0000:00: resource 7 [mem 0x8b800000-0xdfffffff window]
[ 0.834596] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.834597] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.834598] pci_bus 0000:01: resource 1 [mem 0xa1000000-0xa10fffff]
[ 0.936964] NET: Registered protocol family 2
[ 0.957081] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.957136] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.957206] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.957220] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.957233] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.957276] NET: Registered protocol family 1
[ 0.957287] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.958743] PCI: CLS 64 bytes, default 64
[ 0.958776] Unpacking initramfs...
[ 1.570483] Freeing initrd memory: 36568K (ffff8a3eb3884000 - ffff8a3eb5c3a000)
[ 1.587077] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.587080] software IO TLB [mem 0x8338e000-0x8738e000] (64MB) mapped at [ffff8a3f0338e000-ffff8a3f0738dfff]
[ 1.587231] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 1.587231] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.587232] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.587232] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.587233] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.587233] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.610554] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.630306] audit: initializing netlink subsys (disabled)
[ 1.630366] audit: type=2000 audit(1480447162.620:1): initialized
[ 1.631082] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.631097] zbud: loaded
[ 1.673674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.673831] io scheduler noop registered
[ 1.673831] io scheduler deadline registered
[ 1.673836] io scheduler cfq registered (default)
[ 1.674134] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.674135] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.674138] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 1.674141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.674145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.674157] intel_idle: MWAIT substates: 0x11142120
[ 1.674158] intel_idle: v0.4.1 model 0x4E
[ 1.674360] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.674593] GHES: HEST is not enabled!
[ 1.674666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.675257] Linux agpgart interface v0.103
[ 1.675291] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.675291] AMD IOMMUv2 functionality not available on this system
[ 1.675610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.691469] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.691472] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.691688] mousedev: PS/2 mouse device common for all mice
[ 1.692166] rtc_cmos 00:03: RTC can wake from S4
[ 1.692592] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.692671] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.692677] intel_pstate: Intel P-state driver initializing
[ 1.692983] intel_pstate: HWP enabled
[ 1.693147] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.701730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.770812] NET: Registered protocol family 10
[ 1.790859] mip6: Mobile IPv6
[ 1.790864] NET: Registered protocol family 17
[ 1.790871] mpls_gso: MPLS GSO support
[ 1.791566] microcode: sig=0x406e3, pf=0x80, revision=0x9e
[ 1.791883] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[ 1.792957] registered taskstats version 1
[ 1.793006] zswap: loaded using pool lzo/zbud
[ 1.795364] rtc_cmos 00:03: setting system clock to 2016-11-29 19:19:23 UTC (1480447163)
[ 1.795541] PM: Hibernation image not present or could not be loaded.
[ 1.797943] Freeing unused kernel memory: 1368K (ffffffffac923000 - ffffffffaca79000)
[ 1.797944] Write protecting the kernel read-only data: 10240k
[ 1.798343] Freeing unused kernel memory: 88K (ffff8a3fe95ea000 - ffff8a3fe9600000)
[ 1.804028] Freeing unused kernel memory: 1316K (ffff8a3fe98b7000 - ffff8a3fe9a00000)
[ 1.820366] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.901292] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.901340] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.901346] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.901354] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.901958] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.901981] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.902727] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.902766] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.902776] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.903126] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.917014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.917089] ACPI: Lid Switch [LID0]
[ 1.917147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.917150] ACPI: Power Button [PWRB]
[ 1.917198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.917200] ACPI: Power Button [PWRF]
[ 1.917420] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.918851] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.932053] wmi: Mapper loaded
[ 1.934918] SCSI subsystem initialized
[ 1.934958] ACPI: bus type USB registered
[ 1.934983] usbcore: registered new interface driver usbfs
[ 1.934996] usbcore: registered new interface driver hub
[ 1.935195] usbcore: registered new device driver usb
[ 1.936748] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.936755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.937866] libata version 3.00 loaded.
[ 1.937868] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.937877] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.938004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.938006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.938008] usb usb1: Product: xHCI Host Controller
[ 1.938009] usb usb1: Manufacturer: Linux 4.8.0-parrot-amd64 xhci-hcd
[ 1.938010] usb usb1: SerialNumber: 0000:00:14.0
[ 1.938153] [drm] Initialized drm 1.1.0 20060810
[ 1.938168] hub 1-0:1.0: USB hub found
[ 1.938185] hub 1-0:1.0: 12 ports detected
[ 1.941372] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.944341] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.944347] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.944390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.944392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.944393] usb usb2: Product: xHCI Host Controller
[ 1.944394] usb usb2: Manufacturer: Linux 4.8.0-parrot-amd64 xhci-hcd
[ 1.944395] usb usb2: SerialNumber: 0000:00:14.0
[ 1.944877] AVX2 version of gcm_enc/dec engaged.
[ 1.944877] AES CTR mode by8 optimization enabled
[ 1.944999] hub 2-0:1.0: USB hub found
[ 1.945011] hub 2-0:1.0: 6 ports detected
[ 1.946472] usb: port power management may be unreliable
[ 1.947479] ahci 0000:00:17.0: version 3.0
[ 1.954809] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffff9e3c80664000, 64:1c:67:80:be:19, XID 10900800 IRQ 125
[ 1.954811] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.957809] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.957812] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.958315] scsi host0: ahci
[ 1.958464] scsi host1: ahci
[ 1.958529] ata1: SATA max UDMA/133 abar [email protected] port 0xa112c100 irq 124
[ 1.958532] ata2: SATA max UDMA/133 abar [email protected] port 0xa112c180 irq 124
[ 1.971016] [drm] Memory usable by graphics device = 4096M
[ 1.971018] [drm] Replacing VGA console driver
[ 1.972118] Console: switching to colour dummy device 80x25
[ 1.977217] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.977218] [drm] Driver supports precise vblank timestamp query.
[ 1.986799] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.987333] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[ 1.987891] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.993993] [drm] GuC firmware load skipped
[ 2.273688] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.273725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.274729] ata1.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133
[ 2.274734] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.275898] ata1.00: configured for UDMA/133
[ 2.276406] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[ 2.276499] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5
[ 2.279001] ata2.00: configured for UDMA/33
[ 2.306502] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.307292] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.307379] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 2.318435] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
[ 2.324198] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 2.574617] fbcon: inteldrmfb (fb0) is primary device
[ 2.577249] usb 1-4: New USB device found, idVendor=04f2, idProduct=b57d
[ 2.577252] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.577254] usb 1-4: Product: EasyCamera
[ 2.577256] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.577258] usb 1-4: SerialNumber: 0001
[ 2.594243] tsc: Refined TSC clocksource calibration: 2303.999 MHz
[ 2.594258] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns
[ 2.750817] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 2.926202] random: fast init done
[ 2.937413] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129
[ 2.937416] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.937418] usb 1-5: Product: USB2.0-CRW
[ 2.937420] usb 1-5: Manufacturer: Generic
[ 2.937422] usb 1-5: SerialNumber: 20100201396000000
[ 2.943488] usbcore: registered new interface driver rtsx_usb
[ 2.948632] psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4886]
[ 3.005020] psmouse serio1: synaptics: queried min coordinates: x [1240..], y [964..]
[ 3.107484] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 3.114521] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00523/0x840300/0x2a800/0x0, board id: 2847, fw id: 1887761
[ 3.183179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.295995] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360
[ 3.295998] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.367924] [drm] RC6 on
[ 3.607330] clocksource: Switched to clocksource tsc
[ 3.815321] Console: switching to colour frame buffer device 170x48
[ 3.837735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.857929] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.857932] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.857961] sd 0:0:0:0: [sda] Write Protect is off
[ 3.857964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.857995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.877440] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.877446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.878169] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.941508] sda: sda1 sda2 < sda5 >
[ 3.942566] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.483633] raid6: sse2x1 gen() 5741 MB/s
[ 4.540299] raid6: sse2x1 xor() 4192 MB/s
[ 4.596965] raid6: sse2x2 gen() 8130 MB/s
[ 4.653633] raid6: sse2x2 xor() 5526 MB/s
[ 4.710299] raid6: sse2x4 gen() 9304 MB/s
[ 4.766968] raid6: sse2x4 xor() 6183 MB/s
[ 4.823633] raid6: avx2x1 gen() 16020 MB/s
[ 4.880302] raid6: avx2x2 gen() 18596 MB/s
[ 4.936971] raid6: avx2x4 gen() 18912 MB/s
[ 4.936971] raid6: using algorithm avx2x4 gen() 18912 MB/s
[ 4.936972] raid6: using avx2x2 recovery algorithm
[ 4.937234] xor: automatically using best checksumming function:
[ 4.970298] avx : 19647.600 MB/sec
[ 5.127774] Btrfs loaded, crc32c=crc32c-intel
[ 5.442955] PM: Starting manual resume from disk
[ 5.442963] PM: Hibernation image partition 8:5 present
[ 5.442965] PM: Looking for hibernation image.
[ 5.443288] PM: Image not found (code -22)
[ 5.443292] PM: Hibernation image not present or could not be loaded.
[ 6.130014] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.135672] random: crng init done
[ 7.430103] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.801500] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.802020] systemd[1]: Detected architecture x86-64.
[ 7.821214] systemd[1]: Set hostname to <parrot>.
[ 10.663122] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[ 10.665060] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 10.665128] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 10.665159] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 10.665187] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 10.665214] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 10.665242] systemd[1]: Received SIGRTMIN+20 from PID 165 (plymouthd).
[ 11.721689] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.795125] systemd-journald[253]: Received request to flush runtime journal from PID 1
[ 12.082597] ACPI: AC Adapter [ADP0] (off-line)
[ 12.808576] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.915597] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.915625] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.932465] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.975338] ACPI: Battery Slot [BAT0] (battery present)
[ 13.010104] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 13.087276] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 13.155418] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[ 13.745655] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 13.833085] iTCO_vendor_support: vendor-support=0
[ 13.834437] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.834662] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 13.835010] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.950649] Bluetooth: Core ver 2.21
[ 13.950695] NET: Registered protocol family 31
[ 13.950698] Bluetooth: HCI device and connection manager initialized
[ 13.950709] Bluetooth: HCI socket layer initialized
[ 13.950718] Bluetooth: L2CAP socket layer initialized
[ 13.950738] Bluetooth: SCO socket layer initialized
[ 14.082977] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[ 14.083428] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 14.083434] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.083439] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 14.083442] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 14.083445] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 14.083450] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 14.083455] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 14.084538] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 14.130745] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 14.133011] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 14.133335] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 14.133666] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 14.133976] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 14.134273] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 14.228939] Bluetooth: HCI UART driver ver 2.3
[ 14.228946] Bluetooth: HCI UART protocol H4 registered
[ 14.228949] Bluetooth: HCI UART protocol BCSP registered
[ 14.228953] Bluetooth: HCI UART protocol LL registered
[ 14.228956] Bluetooth: HCI UART protocol ATH3K registered
[ 14.228959] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.229054] Bluetooth: HCI UART protocol Intel registered
[ 14.229109] Bluetooth: HCI UART protocol BCM registered
[ 14.229112] Bluetooth: HCI UART protocol QCA registered
[ 14.353652] intel_rapl: Found RAPL domain package
[ 14.353658] intel_rapl: Found RAPL domain core
[ 14.353689] intel_rapl: Found RAPL domain uncore
[ 14.353693] intel_rapl: Found RAPL domain dram
[ 14.572279] usbcore: registered new interface driver btusb
[ 14.622717] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2)
[ 14.622727] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2
[ 14.622740] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2)
[ 14.832588] media: Linux media interface: v0.10
[ 14.880860] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2)
[ 14.880866] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2
[ 14.880878] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2)
[ 15.042922] Linux video capture interface: v2.00
[ 15.176258] uvcvideo: Found UVC 1.00 device EasyCamera (04f2:b57d)
[ 15.181209] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.181220] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.181226] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.181493] input: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15
[ 15.181703] usbcore: registered new interface driver uvcvideo
[ 15.181705] USB Video Class driver (1.1.1)
[ 16.697821] Adding 4097020k swap on /dev/sda5. Priority:-1 extents:1 across:4097020k FS
[ 19.648498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.648505] Bluetooth: BNEP filters: protocol multicast
[ 19.648517] Bluetooth: BNEP socket layer initialized
[ 20.281999] systemd[1]: apt-daily.timer: Adding 10h 31min 44.529655s random time.
[ 21.765882] Netfilter messages via NETLINK v0.30.
[ 22.292104] systemd[1]: apt-daily.timer: Adding 6h 1min 56.136650s random time.
[ 25.151321] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.260460] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 25.275917] r8169 0000:01:00.0 eth0: link down
[ 25.275925] r8169 0000:01:00.0 eth0: link down
[ 25.276013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.856533] r8169 0000:01:00.0 eth0: link up
[ 26.856541] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.823637] NET: Registered protocol family 4
[ 29.851568] NET: Registered protocol family 3
[ 29.853160] NET: Registered protocol family 5
[ 30.004209] systemd[1]: apt-daily.timer: Adding 48min 52.138922s random time.
[ 30.167776] systemd[1]: apt-daily.timer: Adding 6h 15min 3.487833s random time.
[ 2598.228885] utox[2771]: segfault at 7f33237e92c5 ip 0000000000665a4d sp 00007f3339b4b750 error 4 in utox[400000+2fa000]



11. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 20:45h

nem no lspci nem no dmesg achei algo com a palavra wireless ou wifi


12. Re: Lenovo ideapad 310 não conecta ao wifi [RESOLVIDO]

Marcos Souza
IUseLinux

(usa Slackware)

Enviado em 29/11/2016 - 20:47h

tambem deu um lspci -nnk como alguns me falaram para analisar e este e o resultado
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
Subsystem: Lenovo Skylake Host Bridge/DRAM Registers [17aa:3805]
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
Subsystem: Lenovo HD Graphics 520 [17aa:3822]
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:380f]
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Lenovo Sunrise Point-LP Thermal subsystem [17aa:380e]
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)
Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:3801]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)
Subsystem: Lenovo Sunrise Point-LP SATA Controller [AHCI mode] [17aa:3809]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d14] (rev f1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
Subsystem: Lenovo Sunrise Point-LP LPC Controller [17aa:380a]
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Lenovo Sunrise Point-LP PMC [17aa:3816]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:3815]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Lenovo Sunrise Point-LP SMBus [17aa:3816]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:3854]
Kernel driver in use: r8169
Kernel modules: r8169




01 02 03



Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner
Linux banner
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts