Touchpad do notebook Microboard no Debian

neto_itape
(usa Debian)

Enviado em 24/06/2011 - 17:14h

Estou postando a saida dos comandos pedidos.

root@DebianMB:/home/netoitape# chkconfig --list
acpi-fakekey 0:off 1:off 2:on 3:on 4:on 5:on 6:off
acpi-support 0:off 1:off 2:on 3:on 4:on 5:on 6:off
acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off
alsa-utils 0:off 1:off 2:on 3:off 4:off 5:off 6:off S:on
anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off
apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
avahi-daemon 0:off 1:off 2:on 3:on 4:on 5:on 6:off
binfmt-support 0:off 1:off 2:on 3:on 4:on 5:on 6:off
bluetooth 0:off 1:off 2:on 3:on 4:on 5:on 6:off
bootlogd 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
bootlogs 0:off 1:on 2:on 3:on 4:on 5:on 6:off
bootmisc.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
checkfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
checkroot.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
console-setup 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
cpufrequtils 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cron 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off
dbus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
exim4 0:off 1:off 2:on 3:on 4:on 5:on 6:off
fancontrol 0:off 1:off 2:on 3:on 4:on 5:on 6:off
fuse 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
gdm3 0:off 1:off 2:on 3:on 4:on 5:on 6:off
hal 0:off 1:off 2:on 3:on 4:on 5:on 6:off
hdparm 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hostname.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hwclock.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hwclockfirst.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
ifupdown 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
ifupdown-clean 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
kbd 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
kerneloops 0:off 1:off 2:on 3:on 4:on 5:on 6:off
keyboard-setup 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
killprocs 0:off 1:on 2:off 3:off 4:off 5:off 6:off
lm-sensors 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
loadcpufreq 0:off 1:off 2:on 3:on 4:on 5:on 6:off
module-init-tools 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountall-bootclean.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountall.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountdevsubfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountkernfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountnfs-bootclean.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountnfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountoverflowtmp 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mtab.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
network-manager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
networking 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
nfs-common 0:off 1:off 2:on 3:on 4:on 5:on 6:off S:on
pcmciautils 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
portmap 0:off 1:off 2:on 3:on 4:on 5:on 6:off S:on
pppd-dns 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
procps 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
rc.local 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rcS 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rmnologin 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rsync 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saned 0:off 1:off 2:on 3:on 4:on 5:on 6:off
sendsigs 0:off 1:off 2:off 3:off 4:off 5:off 6:off
stop-bootlogd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
stop-bootlogd-single 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
stunnel4 0:off 1:off 2:on 3:on 4:on 5:on 6:off
sudo 0:off 1:off 2:on 3:on 4:on 5:on 6:off
udev 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
udev-mtab 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
umountfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off
umountnfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off
umountroot 0:off 1:off 2:off 3:off 4:off 5:off 6:off
unattended-upgrades 0:off 1:off 2:off 3:off 4:off 5:off 6:off
urandom 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
vboxballoonctrl-service 0:off 1:off 2:on 3:on 4:on 5:on 6:off
vboxdrv 0:off 1:off 2:on 3:on 4:on 5:on 6:off
vboxweb-service 0:off 1:off 2:on 3:on 4:on 5:on 6:off
x11-common 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
root@DebianMB:/home/netoitape#
root@DebianMB:/home/netoitape# cat /boot/config-$(uname -r) | grep MOUSE
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_USB_IDMOUSE=m

root@DebianMB:/home/netoitape# cat /etc/modprobe.d/blacklist.conf
# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
# to load them. It does not affect autoloading of modules by the kernel.
# This file is provided by the udev package.

# evbug is a debug tool and should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# replaced by tmscsim
blacklist am53c974

# these watchdog drivers break some systems
blacklist iTCO_wdt

root@DebianMB:/home/netoitape#

n4t4n
(usa Arch Linux)

Enviado em 27/06/2011 - 11:59h

Desconsidere o último post, pois eu não havia percebido que o udev estava sendo iniciado no nível S, então, só posta a saída dos comandos abaixo.

dmesg | grep udev

dmesg | grep mouse

dmesg | grep MOUSE

n4t4n
(usa Arch Linux)

Enviado em 27/06/2011 - 12:01h

Também posta

dmesg | grep Touchpad

n4t4n
(usa Arch Linux)

Enviado em 27/06/2011 - 12:48h

edite o arquivo /etc/modprob.conf.d/blacklist e comente as seguintes linhas

blacklist usbmouse

ficando da seguinte forma

#blacklist usbmouse

reinicie

neto_itape
(usa Debian)

Enviado em 30/06/2011 - 09:37h

Agora o seguinte esse resultados são do debian, e do ubuntu vc quer tambem os resultados? Ah o ultimo passo já posto ele apos reiniciar o pc.
Vlws!

root@DebianMB:/home/netoitape# dmesg | grep udev
[ 1.784732] udev[77]: starting version 164
[ 4.352933] udev[485]: starting version 164
root@DebianMB:/home/netoitape# dmesg | grep MOUSE
root@DebianMB:/home/netoitape# dmesg | grep mouse
[ 1.773364] mice: PS/2 mouse device common for all mice
root@DebianMB:/home/netoitape# dmesg | grep Touchpad
root@DebianMB:/home/netoitape#

n4t4n
(usa Arch Linux)

Enviado em 30/06/2011 - 13:29h

Sim, posta o resultado do ubuntu também. Só precisa do Touchpad

dmesg | grep Touchpad

n4t4n
(usa Arch Linux)

Enviado em 30/06/2011 - 13:39h

aproveita e posta qual a versão do kernel utilizada no ubuntu

uname -rm

neto_itape
(usa Debian)

Enviado em 01/07/2011 - 08:58h

Estou enviando os resultados dos comandos tanto no Debian como no Ubuntu. Fiz o que vc pedio no /etc/modprobe.d/blacklist.conf, comentei a linha #blacklist usbmouse e reinicie e nada mudou, reiniciei sem o mouse usb plugado.

root@DebianMB:/home/netoitape# dmesg | grep udev
[ 1.784732] udev[77]: starting version 164
[ 4.352933] udev[485]: starting version 164
root@DebianMB:/home/netoitape# dmesg | grep mouse
[ 1.773364] mice: PS/2 mouse device common for all mice
root@DebianMB:/home/netoitape# dmesg | grep MOUSE
(nada como resposta)
root@DebianMB:/home/netoitape# dmesg | grep Touchpad
(nada como resposta)


ubuntu@ubuntu:~$ dmesg | grep udev
[ 3.714612] <30>udev[77]: starting version 167
[ 143.531418] <30>udev[1258]: starting version 167
ubuntu@ubuntu:~$ dmesg | grep mouse
[ 3.684380] mousedev: PS/2 mouse device common for all mice
ubuntu@ubuntu:~$ dmesg | grep MOUSE
ubuntu@ubuntu:~$ dmesg | grep Touchpad
[ 156.903456] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
ubuntu@ubuntu:~$ uname -rm
2.6.38-8-generic i686
ubuntu@ubuntu:~$

vminellic
(usa Ubuntu)

Enviado em 01/07/2011 - 11:23h

Bom dia, estava com um problema parecido. Tenho um Microboard Evolution EI5XX, instalei o Ubuntu 11.04 e o Touchpad não funcionava. A solução para este problema foi adicionar a linha "psmouse proto=imps" no final do arquivo /etc/modules e reiniciar o notebook. Espero ter ajudado.

n4t4n
(usa Arch Linux)

Enviado em 01/07/2011 - 12:52h

Taí uma dica de quem possui uma máquina parecida com a sua. Apesar de ter sido no ubuntu, não custa tentar ela no Debian também, já que o funcionamento é bem parecido.

neto_itape
(usa Debian)

Enviado em 01/07/2011 - 13:57h

Entã fiz a dica mais não deu certo. Mas estava com uma duvida se algo que nos já fizemos que esta impedindo que essas outras dicas funcionem ... tipo é uma duvida pois não sei se posso ter um pouco de razão em pensar assim. Mais vlw vminellic pela dica as vezes não deu no meu caso mas ajude outro que esteja precisando de ajuda tbm.

n4t4n
(usa Arch Linux)

Enviado em 01/07/2011 - 15:36h

É, a essas alturas é possível que sim, alguma configuração que fizemos pode interferir em uma dica dessas que funcionaria de primeira.

É incrivel que o seu Touchpad não está sendo reconhecido pelo sistema operacional. No Ubuntu reconhece normalmente, mas pode ser por causa da versão do kernel que é mais nova.

Podemos tentar colocar um kernel mais novo no seu Debian, ou até mais simples que isso, uma reinstalação do Debian e tentar a dica do vminellic, o que acha?