preciso de ajuda: hd ssd não formata

jwbraga
(usa Ubuntu)

Enviado em 21/09/2022 - 08:10h

bom dia!
so Ubuntu 22.
nao consigo formatar uma hd ssd de um 1tb.
no GParted, peço para excluir a partição, depois de algum tempo aparece a mensagem "esperar" ou "forçar sair". ao sair do GParted não consigo mais inicializa-lo.
penso que ao excluir e criar uma nova partição, talvez consiga formar...

albfneto
(usa openSUSE)

Enviado em 22/09/2022 - 20:17h

Acho que a galera precisa mais informações.
Esse micro é novo?
Tem Windows junto, UEFI e Boot Seguro?
que micro é e que lInux está usando?


¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Albfneto,
Ribeirão Preto, S.P., Brasil.
Usuário Linux, Linux Counter: #479903.
Distros Favoritas: Sabayon, Gentoo, openSUSE, Mageia e OpenMandriva.

jwbraga
(usa Ubuntu)

Enviado em 23/09/2022 - 06:47h

bom dia!
primeiro, obrigado pelo interesse, acredito que que as chances de recuperar esse SSD são remotas...

dados: não é novo, aproximadamente 6 anos de uso. é um notebook Asus X551W com 4 giga de memória.
Windows 10 e Ubuntu 22 em dual boot. Acredito que tenha UEFI.
mas o comportamento do SSD no micro com processador i7 e 4giga de memoria, Linux Mint, é o mesmo. como é o mesmo no notebook de 15anos atrás, rodando Linux Mint 32, por sinal muito bom...

Obs.: usando o diskpart, consegui excluir a particao; porém, agora nao consigo mais particionar, da erro de (E/S) de entrada e saida... outro ponto, troquei o HD de case e melhorou, já não desliga (desconecta) mais quando dá erro... O GParted não cria a tabela de partição...

Nota: o SSD, Sansung 1T, é novo; o vendedor não quiz trocar e nem devolver o dinheiro. mas tudo bem, paguei barato pela lição: não comprar nada em Plataforma de vendedores chineses.

leandropscardua
(usa Ubuntu)

Enviado em 23/09/2022 - 08:30h

Dá uma olhada nos logs p ver se está ocorrendo algum problema. Vc pode fazer o seguinte:
1-desconectar o hd
2-limpar os logs ( sudo dmesg --clear)
3-conectar o hd
4-rodar dmesg e copiar os logs
Depois fazer o mesmo na hora de particionar(limpar logs e copiar). Fica mais fácil para analisar

clodoaldops
(usa Linux Mint)

Enviado em 23/09/2022 - 09:30h

Já tentou formatar usando pendrive do Ubuntu?

jwbraga
(usa Ubuntu)

Enviado em 23/09/2022 - 12:46h

segue as saídas do comando dmesg:

hd conectada
------------
root@jwb:/home/jwb# dmesg --clear
root@jwb:/home/jwb# dmesg
[ 1020.506022] usb 1-1.1: USB disconnect, device number 4
[ 1020.982672] usb 1-1.1: new low-speed USB device number 6 using xhci_hcd
[ 1021.091043] usb 1-1.1: New USB device found, idVendor=2a7a, idProduct=9a18, bcdDevice= 0.01
[ 1021.091054] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1021.091058] usb 1-1.1: Product: CASUE USB Keyboard
[ 1021.091061] usb 1-1.1: Manufacturer: CASUE
[ 1021.105520] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:2A7A:9A18.0005/input/input26
[ 1021.164330] hid-generic 0003:2A7A:9A18.0005: input,hidraw2: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input0
[ 1021.170900] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input27
[ 1021.231147] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input28
[ 1021.231858] hid-generic 0003:2A7A:9A18.0006: input,hidraw3: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input1
[ 1022.262739] usb 2-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[ 1022.283606] usb 2-1.2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
[ 1022.283618] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1022.283622] usb 2-1.2: Product: USB to ATA/ATAPI Bridge
[ 1022.283625] usb 2-1.2: Manufacturer: JMicron
[ 1022.283628] usb 2-1.2: SerialNumber: 0123456789ABCDEF
[ 1022.291383] scsi host2: uas
[ 1022.295124] scsi 2:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
[ 1022.298971] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1032.916691] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1032.916703] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1032.916881] sd 2:0:0:0: [sdb] Write Protect is off
[ 1032.916889] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1032.917235] sd 2:0:0:0: [sdb] Disabling FUA
[ 1032.917241] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1032.917539] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1032.928329] sd 2:0:0:0: [sdb] Attached SCSI disk

root@jwb:/home/jwb#

root@jwb:/home/jwb#
root@jwb:/home/jwb# dmesg
[ 1020.506022] usb 1-1.1: USB disconnect, device number 4
[ 1020.982672] usb 1-1.1: new low-speed USB device number 6 using xhci_hcd
[ 1021.091043] usb 1-1.1: New USB device found, idVendor=2a7a, idProduct=9a18, bcdDevice= 0.01
[ 1021.091054] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1021.091058] usb 1-1.1: Product: CASUE USB Keyboard
[ 1021.091061] usb 1-1.1: Manufacturer: CASUE
[ 1021.105520] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:2A7A:9A18.0005/input/input26
[ 1021.164330] hid-generic 0003:2A7A:9A18.0005: input,hidraw2: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input0
[ 1021.170900] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input27
[ 1021.231147] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input28
[ 1021.231858] hid-generic 0003:2A7A:9A18.0006: input,hidraw3: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input1
[ 1022.262739] usb 2-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[ 1022.283606] usb 2-1.2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
[ 1022.283618] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1022.283622] usb 2-1.2: Product: USB to ATA/ATAPI Bridge
[ 1022.283625] usb 2-1.2: Manufacturer: JMicron
[ 1022.283628] usb 2-1.2: SerialNumber: 0123456789ABCDEF
[ 1022.291383] scsi host2: uas
[ 1022.295124] scsi 2:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
[ 1022.298971] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1032.916691] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1032.916703] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1032.916881] sd 2:0:0:0: [sdb] Write Protect is off
[ 1032.916889] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1032.917235] sd 2:0:0:0: [sdb] Disabling FUA
[ 1032.917241] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1032.917539] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1032.928329] sd 2:0:0:0: [sdb] Attached SCSI disk


root@jwb:/home/jwb#

Rodei o GParted para criar tabela de partição:

root@jwb:/home/jwb# dmesg
[ 1020.506022] usb 1-1.1: USB disconnect, device number 4
[ 1020.982672] usb 1-1.1: new low-speed USB device number 6 using xhci_hcd
[ 1021.091043] usb 1-1.1: New USB device found, idVendor=2a7a, idProduct=9a18, bcdDevice= 0.01
[ 1021.091054] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1021.091058] usb 1-1.1: Product: CASUE USB Keyboard
[ 1021.091061] usb 1-1.1: Manufacturer: CASUE
[ 1021.105520] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:2A7A:9A18.0005/input/input26
[ 1021.164330] hid-generic 0003:2A7A:9A18.0005: input,hidraw2: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input0
[ 1021.170900] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input27
[ 1021.231147] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:2A7A:9A18.0006/input/input28
[ 1021.231858] hid-generic 0003:2A7A:9A18.0006: input,hidraw3: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:14.0-1.1/input1
[ 1022.262739] usb 2-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[ 1022.283606] usb 2-1.2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
[ 1022.283618] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1022.283622] usb 2-1.2: Product: USB to ATA/ATAPI Bridge
[ 1022.283625] usb 2-1.2: Manufacturer: JMicron
[ 1022.283628] usb 2-1.2: SerialNumber: 0123456789ABCDEF
[ 1022.291383] scsi host2: uas
[ 1022.295124] scsi 2:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
[ 1022.298971] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1032.916691] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1032.916703] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1032.916881] sd 2:0:0:0: [sdb] Write Protect is off
[ 1032.916889] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1032.917235] sd 2:0:0:0: [sdb] Disabling FUA
[ 1032.917241] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1032.917539] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1032.928329] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1387.829046] sd 2:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 1387.829084] sd 2:0:0:0: [sdb] tag#21 CDB: Write(10) 2a 00 74 70 6d a0 00 00 10 00
[ 1387.829373] sd 2:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 1387.829404] sd 2:0:0:0: [sdb] tag#20 CDB: Write(10) 2a 00 74 70 6d 00 00 00 08 00
[ 1387.829622] sd 2:0:0:0: [sdb] tag#19 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 1387.829649] sd 2:0:0:0: [sdb] tag#19 CDB: Write(10) 2a 00 74 70 68 00 00 04 00 00
[ 1387.829877] sd 2:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1387.829903] sd 2:0:0:0: [sdb] tag#18 CDB: Write(10) 2a 00 20 00 00 00 00 00 08 00
[ 1387.830108] sd 2:0:0:0: [sdb] tag#17 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1387.830134] sd 2:0:0:0: [sdb] tag#17 CDB: Write(10) 2a 00 00 02 00 00 00 00 08 00
[ 1387.830342] sd 2:0:0:0: [sdb] tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1387.830368] sd 2:0:0:0: [sdb] tag#16 CDB: Write(10) 2a 00 00 00 00 00 00 04 00 00
[ 1387.844698] scsi host2: uas_eh_device_reset_handler start
[ 1387.926020] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[ 1387.952117] scsi host2: uas_eh_device_reset_handler success
[ 1536.541992] sd 2:0:0:0: [sdb] tag#5 timing out command, waited 180s
[ 1536.542040] sd 2:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=180s
[ 1536.542062] sd 2:0:0:0: [sdb] tag#5 Sense Key : Not Ready [current]
[ 1536.542081] sd 2:0:0:0: [sdb] tag#5 Add. Sense: Logical unit is in process of becoming ready
[ 1536.542102] sd 2:0:0:0: [sdb] tag#5 CDB: Write(10) 2a 00 74 70 6d 00 00 00 08 00
[ 1536.542116] blk_update_request: I/O error, dev sdb, sector 1953524992 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 1536.542156] Buffer I/O error on dev sdb, logical block 244190624, lost async page write
[ 1538.547587] sd 2:0:0:0: [sdb] tag#6 timing out command, waited 180s
[ 1538.547635] sd 2:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=182s
[ 1538.547659] sd 2:0:0:0: [sdb] tag#6 Sense Key : Not Ready [current]
[ 1538.547677] sd 2:0:0:0: [sdb] tag#6 Add. Sense: Logical unit is in process of becoming ready
[ 1538.547698] sd 2:0:0:0: [sdb] tag#6 CDB: Write(10) 2a 00 74 70 6d a0 00 00 10 00
[ 1538.547712] blk_update_request: I/O error, dev sdb, sector 1953525152 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0
[ 1538.547751] Buffer I/O error on dev sdb, logical block 244190644, lost async page write
[ 1538.547799] Buffer I/O error on dev sdb, logical block 244190645, lost async page write
[ 1540.553243] sd 2:0:0:0: [sdb] tag#7 timing out command, waited 180s
[ 1540.553292] sd 2:0:0:0: [sdb] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=184s
[ 1540.553314] sd 2:0:0:0: [sdb] tag#7 Sense Key : Not Ready [current]
[ 1540.553333] sd 2:0:0:0: [sdb] tag#7 Add. Sense: Logical unit is in process of becoming ready
[ 1540.553354] sd 2:0:0:0: [sdb] tag#7 CDB: Write(10) 2a 00 00 00 00 00 00 04 00 00
[ 1540.553368] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 128 prio class 0
[ 1540.553506] Buffer I/O error on dev sdb, logical block 0, lost async page write
[ 1540.553594] Buffer I/O error on dev sdb, logical block 1, lost async page write
[ 1540.553632] Buffer I/O error on dev sdb, logical block 2, lost async page write
[ 1540.553664] Buffer I/O error on dev sdb, logical block 3, lost async page write
[ 1540.553694] Buffer I/O error on dev sdb, logical block 4, lost async page write
[ 1540.553724] Buffer I/O error on dev sdb, logical block 5, lost async page write
[ 1540.553753] Buffer I/O error on dev sdb, logical block 6, lost async page write
[ 1542.558792] sd 2:0:0:0: [sdb] tag#8 timing out command, waited 180s
[ 1542.558839] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=186s
[ 1542.558862] sd 2:0:0:0: [sdb] tag#8 Sense Key : Not Ready [current]
[ 1542.558881] sd 2:0:0:0: [sdb] tag#8 Add. Sense: Logical unit is in process of becoming ready
[ 1542.558902] sd 2:0:0:0: [sdb] tag#8 CDB: Write(10) 2a 00 00 02 00 00 00 00 08 00
[ 1542.558916] blk_update_request: I/O error, dev sdb, sector 131072 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 1542.558955] buffer_io_error: 121 callbacks suppressed
[ 1542.558965] Buffer I/O error on dev sdb, logical block 16384, lost async page write
[ 1544.564407] sd 2:0:0:0: [sdb] tag#9 timing out command, waited 180s
[ 1544.564454] sd 2:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=188s
[ 1544.564477] sd 2:0:0:0: [sdb] tag#9 Sense Key : Not Ready [current]
[ 1544.564496] sd 2:0:0:0: [sdb] tag#9 Add. Sense: Logical unit is in process of becoming ready
[ 1544.564518] sd 2:0:0:0: [sdb] tag#9 CDB: Write(10) 2a 00 20 00 00 00 00 00 08 00
[ 1544.564532] blk_update_request: I/O error, dev sdb, sector 536870912 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 1544.564572] Buffer I/O error on dev sdb, logical block 67108864, lost async page write
[ 1546.570101] sd 2:0:0:0: [sdb] tag#10 timing out command, waited 180s
[ 1546.570148] sd 2:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=190s
[ 1546.570171] sd 2:0:0:0: [sdb] tag#10 Sense Key : Not Ready [current]
[ 1546.570190] sd 2:0:0:0: [sdb] tag#10 Add. Sense: Logical unit is in process of becoming ready
[ 1546.570212] sd 2:0:0:0: [sdb] tag#10 CDB: Write(10) 2a 00 74 70 68 00 00 04 00 00
[ 1546.570227] blk_update_request: I/O error, dev sdb, sector 1953523712 op 0x1:(WRITE) flags 0x800 phys_seg 128 prio class 0
[ 1546.570267] Buffer I/O error on dev sdb, logical block 244190464, lost async page write
[ 1546.570350] Buffer I/O error on dev sdb, logical block 244190465, lost async page write
[ 1546.570389] Buffer I/O error on dev sdb, logical block 244190466, lost async page write
[ 1546.570421] Buffer I/O error on dev sdb, logical block 244190467, lost async page write
[ 1546.570452] Buffer I/O error on dev sdb, logical block 244190468, lost async page write
[ 1546.570490] Buffer I/O error on dev sdb, logical block 244190469, lost async page write
[ 1546.570521] Buffer I/O error on dev sdb, logical block 244190470, lost async page write
[ 1546.570558] Buffer I/O error on dev sdb, logical block 244190471, lost async page write
[ 1618.618288] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=58s
[ 1618.618390] sd 2:0:0:0: [sdb] tag#8 Sense Key : Hardware Error [current]
[ 1618.618435] sd 2:0:0:0: [sdb] tag#8 ASC=0x44 <<vendor>>ASCQ=0x81
[ 1618.618463] sd 2:0:0:0: [sdb] tag#8 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 1618.618492] blk_update_request: critical target error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[ 1634.404638] sd 2:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1634.404650] sd 2:0:0:0: [sdb] tag#9 Sense Key : Hardware Error [current]
[ 1634.404658] sd 2:0:0:0: [sdb] tag#9 ASC=0x44 <<vendor>>ASCQ=0x81
[ 1634.404663] sd 2:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[ 1634.404667] blk_update_request: critical target error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1634.404678] buffer_io_error: 120 callbacks suppressed
[ 1634.404680] Buffer I/O error on dev sdb, logical block 0, async page read
[ 1634.405376] sd 2:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1634.405387] sd 2:0:0:0: [sdb] tag#10 Sense Key : Hardware Error [current]
[ 1634.405395] sd 2:0:0:0: [sdb] tag#10 ASC=0x44 <<vendor>>ASCQ=0x81
[ 1634.405400] sd 2:0:0:0: [sdb] tag#10 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 1634.405409] blk_update_request: critical target error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
root@jwb:/home/jwb#

em resposta a pergunta se tentei formatar pelo pendrive do Ubuntu, é não, ainda não; mas dada a sugestão, vou tentar. primeiro tenho que criar a tabela de partições...

clodoaldops
(usa Linux Mint)

Enviado em 23/09/2022 - 14:00h

Se vc usava o HDD ou SSD num PC com Windows é bem provável que tenha retirado o disco sem desativar a inicialização rápida do Windows

jwbraga
(usa Ubuntu)

Enviado em 23/09/2022 - 17:57h

Comprei esse SSD para substituir a HD de 500gigas que roda Windows e Ubuntu em dual boot... talves na formatação eu tenha feito isso... não me lembro!

leandropscardua
(usa Ubuntu)

Enviado em 23/09/2022 - 21:47h

Olha, parece que o sdd está danificado. Num disco mecânico o erro blk_update_request muito provavelmente seria badblock. Vc pode tentar formatar usando o comando dd (dd if=/dev/zero of=/dev/sdX ) e ver se a controladora de disco remapeia esses setores(num hd mecânico faria)

jwbraga
(usa Ubuntu)

Enviado em 24/09/2022 - 15:19h

boa tarde!
acredito que esse SSD, realmente, esteja danificado e que não tem mais nada para fazer... vou partir para outro....
obrigado pelo empenho e peço ao moderador que encerre esse tópico... Muito obrigado!

Mauriciodez
(usa Debian)

Enviado em 26/09/2022 - 21:33h

apesar de eu achar que esses pendrives, ssd e Sui generis chineses são uma furada te aconselho a tentar formatar com windows !!

------------------------------------------------------| Linux User #621728 |------------------------------------------------------



                                " Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"



------------------------------------------------------| Linux User #621728 |------------------------------------------------------ 

galena
(usa KDE Neon)

Enviado em 27/09/2022 - 06:52h

Pelo que entendi vc está tentando formatar o SSD através de uma distro instalado no mesmo o que não é possivel, acho.
A opção correta, como sugeriu clodoaldops, é através de um pendrive do ubuntu, p.ex.