Erro de Kernel

1. Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 22/01/2016 - 14:32h

configuraçao da minha maquina:
Processador AMD Phenon II X4 925
Placa Mae; ASUS M4N68T-M LE rev 1.00G
Memoria Markvision 4G DDR3
Fonte: MYMAX 420W
meu problema é esse :
Message from syslogd@usuario at Jan 22 14:07:51 ...
kernel:[ 300.804073] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV

ja faz algums dias que ta aparecendo já fiz varios procedimento para resolve mas sem sucesso.
1. testei memoria e fiz a limpeza da mesma
2.testei hd, nao só testei como instalei outro hd e ssh e nada.
3.limpei a pasta termica e apliquei nova






  


2. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 22/01/2016 - 15:05h

a certo vou tentar regravar a bios já que no site do fabricante nao tem nenhuma atualizada.


3. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 22/01/2016 - 15:53h

JBaf , já atualizei a Bios deixei forçando os processos , mas o erro persiste , de qualquer forma obrigado pela dica.


4. Re: Erro de Kernel

Luiz Santos
luiztux

(usa Gentoo)

Enviado em 22/01/2016 - 16:04h

Por favor, posta aqui os seguintes:

- dmesg
- lspci
- cat /proc/cpuinfo
- cat /proc/interrupts
- lshw

Dica: coloca a saída de cada um destes comandos entre a tag code disponível aqui no VOL. Ficará mais fácil para visualização.
-----------------------------------''----------------------------------
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.


5. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 22/01/2016 - 17:43h

ok aqui segue o CPUINFO
processor	: 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 925 Processor
stepping : 2
microcode : 0x1000086
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 5624.69
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 925 Processor
stepping : 2
microcode : 0x1000086
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 5625.65
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 925 Processor
stepping : 2
microcode : 0x1000086
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 5625.66
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 925 Processor
stepping : 2
microcode : 0x1000086
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 5625.65
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate


Aqui segue o desmg
[    0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.73-2+deb7u2
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=646aecb1-8196-4393-833b-4ee338ad19a3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000006ffa0000 - 000000006ffb8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ffb8000 - 000000006ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006ffe0000 - 000000006ffee000 (reserved)
[ 0.000000] BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4N68T-M LE, BIOS 1401 07/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x6ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000006ffa0000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 6ffa0000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36bec000 - 375ee000
[ 0.000000] ACPI: RSDP 0x00000000000FB6D0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000006FFA0100 0005C (v01 070511 XSDT1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000006FFA0290 000F4 (v03 070511 FACP1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000006FFA0460 079CA (v01 A1556 A1556000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x000000006FFB8000 00040
[ 0.000000] ACPI: APIC 0x000000006FFA0390 00090 (v01 070511 APIC1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000006FFA0420 0003C (v01 070511 OEMMCFG 20110705 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000006FFB8040 00071 (v01 070511 OEMB1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000006FFA7E30 000C0 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 0x000000006FFA7EF0 00038 (v01 070511 OEMHPET0 20110705 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000006FFA7F30 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,6ffa0000) -> [0,6ffa0000)
[ 0.000000] Initmem setup node 0 0000000000000000-000000006ffa0000
[ 0.000000] NODE_DATA [000000006ff9b000 - 000000006ff9ffff]
[ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006da00000-ffff88006f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0006ffa0
[ 0.000000] On node 0 totalpages: 458539
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6215 pages used for memmap
[ 0.000000] DMA32 zone: 448345 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006fc00000 s78912 r8192 d23488 u262144
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 452263
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=646aecb1-8196-4393-833b-4ee338ad19a3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 56fe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1788104k/1834624k available (3437k kernel code, 468k absent, 46052k reserved, 3301k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.349 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5624.69 BogoMIPS (lpj=11249396)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004049] Security Framework initialized
[ 0.004054] AppArmor: AppArmor disabled by boot time parameter
[ 0.004174] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004953] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005321] Mount-cache hash table entries: 256
[ 0.005417] Initializing cgroup subsys cpuacct
[ 0.005421] Initializing cgroup subsys memory
[ 0.005431] Initializing cgroup subsys devices
[ 0.005432] Initializing cgroup subsys freezer
[ 0.005435] Initializing cgroup subsys net_cls
[ 0.005437] Initializing cgroup subsys blkio
[ 0.005442] Initializing cgroup subsys perf_event
[ 0.005465] tseg: 0000000000
[ 0.005476] CPU: Physical Processor ID: 0
[ 0.005477] CPU: Processor Core ID: 0
[ 0.005479] mce: CPU supports 6 MCE banks
[ 0.005755] ACPI: Core revision 20110623
[ 0.011176] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050867] CPU0: AMD Phenom(tm) II X4 925 Processor stepping 02
[ 0.052002] Performance Events: AMD PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 48
[ 0.052002] ... generic registers: 4
[ 0.052002] ... value mask: 0000ffffffffffff
[ 0.052002] ... max period: 00007fffffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000000000f
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 96000
[ 0.140023] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.140102] #2
[ 0.140103] smpboot cpu 2: start_ip = 96000
[ 0.232025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.232109] #3
[ 0.232110] smpboot cpu 3: start_ip = 96000
[ 0.324032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.324048] Brought up 4 CPUs
[ 0.324050] Total of 4 processors activated (22501.67 BogoMIPS).
[ 0.328163] devtmpfs: initialized
[ 0.330884] PM: Registering ACPI NVS region at 6ffb8000 (163840 bytes)
[ 0.330884] print_constraints: dummy:
[ 0.330884] NET: Registered protocol family 16
[ 0.332026] node 0 link 0: io port [1000, ffffff]
[ 0.332028] TOM: 0000000080000000 aka 2048M
[ 0.332031] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.332033] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.332036] node 0 link 0: mmio [a0000, bffff]
[ 0.332038] node 0 link 0: mmio [80000000, fe0bffff] ==> [80000000, dfffffff] and [f0000000, fe0bffff]
[ 0.332042] bus: [00, 07] on node 0 link 0
[ 0.332044] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.332045] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.332047] bus: 00 index 2 [mem 0x80000000-0xdfffffff]
[ 0.332049] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[ 0.332056] Extended Config Space enabled on 1 nodes
[ 0.332067] ACPI: bus type pci registered
[ 0.332122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.332124] PCI: not using MMCONFIG
[ 0.332126] PCI: Using configuration type 1 for base access
[ 0.332127] PCI: Using configuration type 1 for extended access
[ 0.332668] bio: create slab <bio-0> at 0
[ 0.332668] ACPI: Added _OSI(Module Device)
[ 0.332668] ACPI: Added _OSI(Processor Device)
[ 0.332668] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.332668] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.332868] ACPI: EC: Look up EC in DSDT
[ 0.334127] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.380710] ACPI: Interpreter enabled
[ 0.380716] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.380735] ACPI: Using IOAPIC for interrupt routing
[ 0.380753] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.382397] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.393874] ACPI: No dock devices found.
[ 0.393876] HEST: Table not found.
[ 0.393879] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.394017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.394162] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.394164] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.394166] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.394168] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.394170] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
[ 0.394172] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.394194] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
[ 0.394360] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
[ 0.394367] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.394399] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[ 0.394409] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.394423] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.394427] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.394454] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.394467] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[ 0.394505] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[ 0.394513] pci 0000:00:02.0: reg 10: [mem 0xdfffb000-0xdfffbfff]
[ 0.394544] pci 0000:00:02.0: supports D1 D2
[ 0.394546] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394558] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[ 0.394567] pci 0000:00:02.1: reg 10: [mem 0xdfffac00-0xdfffacff]
[ 0.394604] pci 0000:00:02.1: supports D1 D2
[ 0.394606] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394624] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[ 0.394660] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[ 0.394670] pci 0000:00:05.0: reg 10: [mem 0xdfff4000-0xdfff7fff]
[ 0.394708] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.394725] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[ 0.394745] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.394773] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[ 0.394782] pci 0000:00:07.0: reg 10: [mem 0xdfff9000-0xdfff9fff]
[ 0.394786] pci 0000:00:07.0: reg 14: [io 0xe480-0xe487]
[ 0.394817] pci 0000:00:07.0: supports D1 D2
[ 0.394818] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394832] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[ 0.394839] pci 0000:00:08.0: reg 10: [io 0xe400-0xe407]
[ 0.394843] pci 0000:00:08.0: reg 14: [io 0xe080-0xe083]
[ 0.394847] pci 0000:00:08.0: reg 18: [io 0xe000-0xe007]
[ 0.394850] pci 0000:00:08.0: reg 1c: [io 0xdc00-0xdc03]
[ 0.394854] pci 0000:00:08.0: reg 20: [io 0xd880-0xd88f]
[ 0.394858] pci 0000:00:08.0: reg 24: [mem 0xdfff8000-0xdfff8fff]
[ 0.394883] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[ 0.394890] pci 0000:00:08.1: reg 10: [io 0xd800-0xd807]
[ 0.394894] pci 0000:00:08.1: reg 14: [io 0xd480-0xd483]
[ 0.394898] pci 0000:00:08.1: reg 18: [io 0xd400-0xd407]
[ 0.394901] pci 0000:00:08.1: reg 1c: [io 0xd080-0xd083]
[ 0.394905] pci 0000:00:08.1: reg 20: [io 0xd000-0xd00f]
[ 0.394909] pci 0000:00:08.1: reg 24: [mem 0xdffef000-0xdffeffff]
[ 0.394939] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[ 0.394963] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394978] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[ 0.395001] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.395013] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[ 0.395036] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.395046] pci 0000:00:0d.0: [10de:03d6] type 0 class 0x000300
[ 0.395052] pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
[ 0.395057] pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.395062] pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
[ 0.395067] pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
[ 0.395091] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.395106] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.395118] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.395130] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.395144] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.395198] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.395203] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.395205] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.395207] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.395210] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.395213] pci 0000:00:04.0: bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
[ 0.395215] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.395233] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.395252] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.395272] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.395283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.395399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.395445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.395473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.395501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.395599] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.395752] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.395753] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.400095] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.400184] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.400267] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.400350] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.400432] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.400514] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.400596] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.400679] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.400763] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.400848] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.400933] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.401020] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.401105] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
[ 0.401189] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.401272] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.401357] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.401442] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.401534] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.401608] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.401608] vgaarb: loaded
[ 0.401608] vgaarb: bridge control possible 0000:00:0d.0
[ 0.401608] PCI: Using ACPI for IRQ routing
[ 0.407693] PCI: pci_cache_line_size set to 64 bytes
[ 0.407734] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 0.407736] reserve RAM buffer: 000000006ffa0000 - 000000006fffffff
[ 0.407829] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.407834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.407838] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.420122] Switching to clocksource hpet
[ 0.421396] pnp: PnP ACPI init
[ 0.421409] ACPI: bus type pnp registered
[ 0.421490] pnp 00:00: [bus 00-ff]
[ 0.421493] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.421495] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.421497] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.421499] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.421501] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.421503] pnp 00:00: [mem 0x70000000-0xdfffffff window]
[ 0.421505] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.421537] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.421559] pnp 00:01: [dma 4]
[ 0.421560] pnp 00:01: [io 0x0000-0x000f]
[ 0.421562] pnp 00:01: [io 0x0081-0x0083]
[ 0.421564] pnp 00:01: [io 0x0087]
[ 0.421565] pnp 00:01: [io 0x0089-0x008b]
[ 0.421567] pnp 00:01: [io 0x008f]
[ 0.421569] pnp 00:01: [io 0x00c0-0x00df]
[ 0.421589] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.421597] pnp 00:02: [io 0x0070-0x0071]
[ 0.421608] pnp 00:02: [irq 8]
[ 0.421627] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421634] pnp 00:03: [io 0x0061]
[ 0.421653] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.421661] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.421668] pnp 00:04: [irq 13]
[ 0.421687] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.422397] pnp 00:05: [io 0x0378-0x037f]
[ 0.422405] pnp 00:05: [irq 7]
[ 0.422407] pnp 00:05: [dma 0 disabled]
[ 0.422659] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.422998] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.423000] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.423002] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.423004] pnp 00:06: [io 0x0010-0x001f]
[ 0.423005] pnp 00:06: [io 0x0022-0x003f]
[ 0.423007] pnp 00:06: [io 0x0044-0x004d]
[ 0.423009] pnp 00:06: [io 0x0050-0x005f]
[ 0.423010] pnp 00:06: [io 0x0062-0x0063]
[ 0.423012] pnp 00:06: [io 0x0065-0x006f]
[ 0.423013] pnp 00:06: [io 0x0072-0x007f]
[ 0.423015] pnp 00:06: [io 0x0080]
[ 0.423017] pnp 00:06: [io 0x0084-0x0086]
[ 0.423018] pnp 00:06: [io 0x0088]
[ 0.423020] pnp 00:06: [io 0x008c-0x008e]
[ 0.423021] pnp 00:06: [io 0x0090-0x009f]
[ 0.423023] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.423025] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.423026] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.423028] pnp 00:06: [io 0x0800-0x080f]
[ 0.423030] pnp 00:06: [io 0x0500-0x057f]
[ 0.423032] pnp 00:06: [io 0x0580-0x05ff]
[ 0.423033] pnp 00:06: [io 0x0800-0x087f]
[ 0.423035] pnp 00:06: [io 0x0880-0x08ff]
[ 0.423037] pnp 00:06: [io 0x0d00-0x0d7f]
[ 0.423038] pnp 00:06: [io 0x0d80-0x0dff]
[ 0.423040] pnp 00:06: [io 0x0900-0x097f]
[ 0.423042] pnp 00:06: [io 0x0980-0x09ff]
[ 0.423043] pnp 00:06: [io 0x1100-0x117f]
[ 0.423045] pnp 00:06: [io 0x1180-0x11ff]
[ 0.423047] pnp 00:06: [mem 0xfec80000-0x1fd93ffff]
[ 0.423049] pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
[ 0.423050] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
[ 0.423052] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.423058] pnp 00:06: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.423061] pnp 00:06: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.423129] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.423131] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.423134] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.423136] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.423138] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.423141] system 00:06: [io 0x0880-0x08ff] could not be reserved
[ 0.423143] system 00:06: [io 0x0d00-0x0d7f] has been reserved
[ 0.423145] system 00:06: [io 0x0d80-0x0dff] has been reserved
[ 0.423147] system 00:06: [io 0x1100-0x117f] has been reserved
[ 0.423149] system 00:06: [io 0x1180-0x11ff] has been reserved
[ 0.423153] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.423155] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.423158] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.423160] system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[ 0.423163] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.423165] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.423167] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.423170] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423228] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.423249] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.423300] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.423302] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.423304] pnp 00:08: [mem 0x70000000-0x7fffffff]
[ 0.423337] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.423339] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.423342] system 00:08: [mem 0x70000000-0x7fffffff] has been reserved
[ 0.423344] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423491] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.423493] pnp 00:09: [io 0x0230-0x023f]
[ 0.423494] pnp 00:09: [io 0x0290-0x029f]
[ 0.423496] pnp 00:09: [io 0x0a00-0x0a0f]
[ 0.423498] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.423533] system 00:09: [io 0x0230-0x023f] has been reserved
[ 0.423536] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.423538] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.423541] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.423543] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.424031] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.424039] pnp 00:0a: [irq 4]
[ 0.424040] pnp 00:0a: [dma 0 disabled]
[ 0.424119] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.424155] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.424188] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.424191] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.424306] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.424308] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.424310] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.424312] pnp 00:0c: [mem 0x00100000-0x6fffffff]
[ 0.424314] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.424353] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.424356] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.424358] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.424360] system 00:0c: [mem 0x00100000-0x6fffffff] could not be reserved
[ 0.424363] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.424365] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.424578] pnp: PnP ACPI: found 13 devices
[ 0.424580] ACPI: ACPI bus type pnp unregistered
[ 0.431377] PCI: max bus depth: 1 pci_try_num: 2
[ 0.431390] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.431395] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.431399] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.431403] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.431410] pci 0000:00:04.0: setting latency timer to 64
[ 0.431414] pci 0000:00:09.0: setting latency timer to 64
[ 0.431418] pci 0000:00:0b.0: setting latency timer to 64
[ 0.431421] pci 0000:00:0c.0: setting latency timer to 64
[ 0.431424] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.431426] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.431427] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.431429] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.431431] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
[ 0.431433] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.431435] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.431437] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.431439] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.431441] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.431443] pci_bus 0000:01: resource 8 [mem 0x70000000-0xdfffffff]
[ 0.431444] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.431537] NET: Registered protocol family 2
[ 0.432960] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.433442] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.434692] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.435044] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.435046] TCP reno registered
[ 0.435053] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.435069] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.435200] NET: Registered protocol family 1
[ 0.435412] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.012194] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.012257] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012302] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012355] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012407] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012459] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012514] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012573] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012636] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.012641] pci 0000:00:0d.0: Boot video device
[ 1.012651] PCI: CLS 64 bytes, default 64
[ 1.012700] Unpacking initramfs...
[ 1.196875] Freeing initrd memory: 10248k freed
[ 1.200408] IBS: LVT offset 1 assigned
[ 1.200426] perf: AMD IBS detected (0x0000001f)
[ 1.200607] audit: initializing netlink socket (disabled)
[ 1.200618] type=2000 audit(1453483708.196:1): initialized
[ 1.213283] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.213697] VFS: Disk quotas dquot_6.5.2
[ 1.213728] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.213790] msgmni has been set to 3512
[ 1.213971] alg: No test for stdrng (krng)
[ 1.214003] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.214006] io scheduler noop registered
[ 1.214007] io scheduler deadline registered
[ 1.214029] io scheduler cfq registered (default)
[ 1.214096] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.214117] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.214154] pcieport 0000:00:0b.0: setting latency timer to 64
[ 1.214170] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 1.214202] pcieport 0000:00:0c.0: setting latency timer to 64
[ 1.214217] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 1.214267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.214283] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.214284] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.214503] ERST: Table is not found!
[ 1.214504] GHES: HEST is not enabled!
[ 1.214567] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.234882] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.352558] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.368260] Linux agpgart interface v0.103
[ 1.368353] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.368801] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.368809] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.368938] mousedev: PS/2 mouse device common for all mice
[ 1.368989] rtc_cmos 00:02: RTC can wake from S4
[ 1.369119] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.369158] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.369168] cpuidle: using governor ladder
[ 1.369170] cpuidle: using governor menu
[ 1.369331] TCP cubic registered
[ 1.369399] NET: Registered protocol family 10
[ 1.369790] Mobile IPv6
[ 1.369793] NET: Registered protocol family 17
[ 1.369796] Registering the dns_resolver key type
[ 1.369916] PM: Hibernation image not present or could not be loaded.
[ 1.369925] registered taskstats version 1
[ 1.370214] rtc_cmos 00:02: setting system clock to 2016-01-22 17:28:29 UTC (1453483709)
[ 1.370251] Initializing network drop monitor service
[ 1.371230] Freeing unused kernel memory: 580k freed
[ 1.371384] Write protecting the kernel read-only data: 6144k
[ 1.373463] Freeing unused kernel memory: 640k freed
[ 1.375862] Freeing unused kernel memory: 684k freed
[ 1.385692] udevd[59]: starting version 175
[ 1.396501] usbcore: registered new interface driver usbfs
[ 1.396525] usbcore: registered new interface driver hub
[ 1.402083] SCSI subsystem initialized
[ 1.405172] usbcore: registered new device driver usb
[ 1.405526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.405598] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.405603] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.405643] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.405668] ehci_hcd 0000:00:02.1: debug port 1
[ 1.405675] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.405699] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfffac00
[ 1.409221] libata version 3.00 loaded.
[ 1.416160] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.416184] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.416186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.416188] usb usb1: Product: EHCI Host Controller
[ 1.416190] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.416191] usb usb1: SerialNumber: 0000:00:02.1
[ 1.416400] hub 1-0:1.0: USB hub found
[ 1.416404] hub 1-0:1.0: 10 ports detected
[ 1.416878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.416890] sata_nv 0000:00:08.0: version 3.5
[ 1.417065] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.417108] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.417337] scsi0 : sata_nv
[ 1.417427] scsi1 : sata_nv
[ 1.417516] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21
[ 1.417518] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21
[ 1.417695] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.417723] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.417950] scsi2 : sata_nv
[ 1.418005] scsi3 : sata_nv
[ 1.418096] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 20
[ 1.418099] ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
[ 1.418200] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.418334] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.418338] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.481130] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 90:e6:ba:e1:c5:f5
[ 1.481134] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.481179] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.481181] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.481192] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.481215] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfffb000
[ 1.538037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.538040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.538042] usb usb2: Product: OHCI Host Controller
[ 1.538044] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.538045] usb usb2: SerialNumber: 0000:00:02.0
[ 1.538162] hub 2-0:1.0: USB hub found
[ 1.538166] hub 2-0:1.0: 10 ports detected
[ 1.538272] pata_amd 0000:00:06.0: version 0.4.1
[ 1.538296] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.538562] scsi4 : pata_amd
[ 1.538625] scsi5 : pata_amd
[ 1.539003] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.539005] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.738307] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.738312] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.912026] usb 2-3: new low-speed USB device number 2 using ohci_hcd
[ 2.058290] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.122065] usb 2-3: New USB device found, idVendor=04f3, idProduct=0230
[ 2.122068] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.122070] usb 2-3: Product: USB+PS/2 Optical Mouse
[ 2.200026] Refined TSC clocksource calibration: 2812.792 MHz.
[ 2.200030] Switching to clocksource tsc
[ 2.428019] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[ 2.524034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.532320] ata4.00: HPA detected: current 976771055, native 976773168
[ 2.532325] ata4.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 2.532327] ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.548317] ata4.00: configured for UDMA/133
[ 2.548395] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 2.548550] ata6: port disabled--ignoring
[ 2.551521] sd 3:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2.551610] sd 3:0:0:0: [sda] Write Protect is off
[ 2.551613] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.551639] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.577210] sda: sda1 sda2 < sda5 sda6 >
[ 2.577567] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.578846] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 2.641061] usb 2-4: New USB device found, idVendor=0e8f, idProduct=0022
[ 2.641064] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.641066] usb 2-4: Product: USB KB V11
[ 2.641067] usb 2-4: Manufacturer: GASIA
[ 2.655195] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input0
[ 2.655265] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:02.0-3/input0
[ 2.660217] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input1
[ 2.660267] generic-usb 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:02.0-4/input0
[ 2.672127] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input2
[ 2.672171] generic-usb 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:02.0-4/input1
[ 2.672186] usbcore: registered new interface driver usbhid
[ 2.672188] usbhid: USB HID core driver
[ 3.354776] PM: Starting manual resume from disk
[ 3.354779] PM: Hibernation image partition 8:5 present
[ 3.354781] PM: Looking for hibernation image.
[ 3.354966] PM: Image not found (code -22)
[ 3.354969] PM: Hibernation image not present or could not be loaded.
[ 3.361363] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.361366] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.524575] EXT4-fs (sda1): recovery complete
[ 3.532750] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.474026] udevd[354]: starting version 175
[ 4.799516] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.799522] ACPI: Power Button [PWRB]
[ 4.799577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.799579] ACPI: Power Button [PWRF]
[ 4.934282] parport_pc 00:05: reported by Plug and Play ACPI
[ 4.934326] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.011439] ACPI: resource nForce2_smbus [io 0x0600-0x063f] conflicts with ACPI region SMRG [io 0x600-0x6ff]
[ 5.011442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.011480] i2c i2c-0: nForce2 SMBus adapter at 0x700
[ 5.041101] EDAC MC: Ver: 2.1.0
[ 5.046286] powernow-k8: Found 1 AMD Phenom(tm) II X4 925 Processor (4 cpu cores) (version 2.20.00)
[ 5.046317] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.046319] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 5.046321] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 5.046322] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.054154] MCE: In-kernel MCE decoding enabled.
[ 5.056556] AMD64 EDAC driver v3.4.0
[ 5.056752] EDAC amd64: DRAM ECC disabled.
[ 5.056769] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.056773] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.056776] (Note that use of the override may cause unknown side effects.)
[ 5.067974] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.303067] [drm] Initialized drm 1.1.0 20060810
[ 5.520881] wmi: Mapper loaded
[ 5.561950] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[ 5.562515] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.562549] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[ 5.565834] [drm] nouveau 0000:00:0d.0: Checking PRAMIN for VBIOS
[ 5.605809] [drm] nouveau 0000:00:0d.0: ... appears to be valid
[ 5.605814] [drm] nouveau 0000:00:0d.0: Using VBIOS from PRAMIN
[ 5.605825] [drm] nouveau 0000:00:0d.0: BIT BIOS found
[ 5.605832] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.28
[ 5.605840] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[ 5.606088] [drm] nouveau 0000:00:0d.0: MXM: no VBIOS data, nothing to do
[ 5.606095] [drm] nouveau 0000:00:0d.0: DCB version 3.0
[ 5.606102] [drm] nouveau 0000:00:0d.0: DCB outp 00: 01000310 00000023
[ 5.606109] [drm] nouveau 0000:00:0d.0: DCB outp 01: 00110204 942b0003
[ 5.606116] [drm] nouveau 0000:00:0d.0: DCB conn 00: 0000
[ 5.606122] [drm] nouveau 0000:00:0d.0: DCB conn 01: 1131
[ 5.606128] [drm] nouveau 0000:00:0d.0: DCB conn 02: 0110
[ 5.606135] [drm] nouveau 0000:00:0d.0: DCB conn 03: 0111
[ 5.606141] [drm] nouveau 0000:00:0d.0: DCB conn 04: 0113
[ 5.606152] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xD9C9
[ 5.606160] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[ 5.606203] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[ 5.606363] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDB17
[ 5.606370] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDB18
[ 5.606532] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDC9A
[ 5.606543] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDCE3
[ 5.606778] [TTM] Zone kernel: Available graphics memory: 900128 kiB
[ 5.606783] [TTM] Initializing pool allocator
[ 5.606796] [TTM] Initializing DMA pool allocator
[ 5.606820] [drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM (unknown type)
[ 5.618237] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[ 5.622043] [drm] nouveau 0000:00:0d.0: Saving VGA fonts
[ 5.663140] [drm] nouveau 0000:00:0d.0: DCB type 4 not known
[ 5.663147] [drm] nouveau 0000:00:0d.0: Unknown-1 has no encoders, removing
[ 5.664323] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.664328] [drm] No driver support for vblank timestamp query.
[ 5.669729] [drm] nouveau 0000:00:0d.0: 1 available performance level(s)
[ 5.669740] [drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.669748] [drm] nouveau 0000:00:0d.0: c:
[ 5.720664] [drm] nouveau 0000:00:0d.0: allocated 1366x768 fb: 0x49000, bo ffff8800369fb000
[ 5.720876] fbcon: nouveaufb (fb0) is primary device
[ 5.791902] Console: switching to colour frame buffer device 170x48
[ 5.793500] fb0: nouveaufb frame buffer device
[ 5.793502] drm: registered panic notifier
[ 5.793507] [drm] Initialized nouveau 1.0.0 20120316 for 0000:00:0d.0 on minor 0
[ 5.794152] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 5.794164] hda_intel: Disabling MSI
[ 5.794209] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 8.632634] Adding 7860220k swap on /dev/sda5. Priority:-1 extents:1 across:7860220k
[ 8.665701] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.917554] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.008321] loop: module loaded
[ 10.024255] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.895830] RPC: Registered named UNIX socket transport module.
[ 10.895839] RPC: Registered udp transport module.
[ 10.895845] RPC: Registered tcp transport module.
[ 10.895850] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.929761] FS-Cache: Loaded
[ 10.959029] FS-Cache: Netfs 'nfs' registered for caching
[ 10.977464] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.573202] Bluetooth: Core ver 2.16
[ 13.573240] NET: Registered protocol family 31
[ 13.573247] Bluetooth: HCI device and connection manager initialized
[ 13.573254] Bluetooth: HCI socket layer initialized
[ 13.573259] Bluetooth: L2CAP socket layer initialized
[ 13.573270] Bluetooth: SCO socket layer initialized
[ 13.599757] Bluetooth: RFCOMM TTY layer initialized
[ 13.599770] Bluetooth: RFCOMM socket layer initialized
[ 13.599775] Bluetooth: RFCOMM ver 1.11
[ 13.612872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.612880] Bluetooth: BNEP filters: protocol multicast
[ 14.254843] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 24.776041] eth0: no IPv6 routers present
[ 1200.804044] [Hardware Error]: CPU:1 MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040009b000136
[ 1200.804060] [Hardware Error]: MC0_ADDR: 0x0000000036a31880
[ 1200.804065] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 1200.804073] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD

Interrupts
           CPU0       CPU1       CPU2       CPU3       
0: 39 0 0 46 IO-APIC-edge timer
1: 0 0 0 2 IO-APIC-edge i8042
7: 1 0 0 0 IO-APIC-edge parport0
8: 0 0 0 1 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 0 4 IO-APIC-edge i8042
14: 0 0 0 0 IO-APIC-edge pata_amd
15: 0 0 0 0 IO-APIC-edge pata_amd
20: 1 8 96 33673 IO-APIC-fasteoi sata_nv
21: 0 0 0 468 IO-APIC-fasteoi sata_nv, snd_hda_intel
22: 0 1 16 2229 IO-APIC-fasteoi ehci_hcd:usb1, nouveau
23: 2 3 178 69255 IO-APIC-fasteoi ohci_hcd:usb2
43: 2 27 822 248972 PCI-MSI-edge eth0
NMI: 28 25 26 28 Non-maskable interrupts
LOC: 1012280 1001451 988629 994812 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 28 25 26 28 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 1839545 1793694 1787701 1773309 Rescheduling interrupts
CAL: 544 642 728 381 Function call interrupts
TLB: 110657 122252 118796 147127 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 26 26 26 26 Machine check polls
ERR: 1
MIS: 0

lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control

o lshw nao foi encontrado




6. Re: Erro de Kernel

Luiz Santos
luiztux

(usa Gentoo)

Enviado em 22/01/2016 - 19:51h

Por favor, instale o lshw via apt-get.

Poste a saída dele aqui, igual aos outros.



-----------------------------------''----------------------------------
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.


7. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 22/01/2016 - 19:58h

obrigado pela atenção , segue o comando lshw :
mauro-desktop
description: Desktop Computer
product: System Product Name (To Be Filled By O.E.M.)
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 64 bits
capabilities: smbios-2.5 dmi-2.5 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00E2217A-8DFE-D511-BA0F-90E6BAE1C5F5
*-core
description: Motherboard
product: M4N68T-M LE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev X.0x
serial: MF70A1G02705177
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1401
date: 07/05/2011
size: 64KiB
capacity: 960KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: AMD Phenom(tm) II X4 925 Processor
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: AMD Phenom(tm) II X4 925 Processor
serial: To Be Filled By O.E.M.
slot: AM3
size: 800MHz
capacity: 2800MHz
width: 64 bits
clock: 200MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall cpufreq
configuration: cores=4 enabledcores=4
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 512KiB
capacity: 512KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 2MiB
capacity: 2MiB
capabilities: pipeline-burst internal varies unified
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 6MiB
capacity: 6MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 2a
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM Synchronous 1333 MHz (0,8 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Host Bridge
vendor: NVIDIA Corporation
physical id: 4
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: NVIDIA Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: NVIDIA Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:10 ioport:e00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB controller
product: MCP61 USB 1.1 Controller
vendor: NVIDIA Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:23 memory:dfffb000-dfffbfff
*-usb:1
description: USB controller
product: MCP61 USB 2.0 Controller
vendor: NVIDIA Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a3
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:22 memory:dfffac00-dfffacff
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: NVIDIA Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: NVIDIA Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=snd_hda_intel latency=0 maxlatency=5 mingnt=2
resources: irq:22 memory:dfff4000-dfff7fff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: NVIDIA Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: NVIDIA Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 90:e6:ba:e1:c5:f5
size: 100000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.1.4 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100Mbit/s
resources: irq:43 memory:dfff9000-dfff9fff ioport:e480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: NVIDIA Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:20 ioport:e400(size=8) ioport:e080(size=4) ioport:e000(size=8) ioport:dc00(size=4) ioport:d880(size=16) memory:dfff8000-dfff8fff
*-ide:2
description: IDE interface
product: MCP61 SATA Controller
vendor: NVIDIA Corporation
physical id: 8.1
bus info: pci@0000:00:08.1
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=16) memory:dffef000-dffeffff
*-disk
description: ATA Disk
product: ST3500418AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sda
version: CC37
serial: 9VM3VQYW
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=000d707b
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: 646aecb1-8196-4393-833b-4ee338ad19a3
size: 9536MiB
capacity: 9536MiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2016-01-20 10:53:36 filesystem=ext4 lastmountpoint=/ modified=2016-01-22 15:28:36 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2016-01-22 15:28:37 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@3:0.0.0,2
logical name: /dev/sda2
size: 456GiB
capacity: 456GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 7676MiB
capabilities: nofs
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /home
capacity: 448GiB
configuration: mount.fstype=ext4 mount.options=rw,relatime,user_xattr,barrier=1,data=ordered state=mounted
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:42
*-display
description: VGA compatible controller
product: C61 [GeForce 7025 / nForce 630a]
vendor: NVIDIA Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:21 memory:de000000-deffffff memory:c0000000-cfffffff memory:dd000000-ddffffff memory:dffc0000-dffdffff
*-pci:4
description: Host bridge
product: Family 10h Processor HyperTransport Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Family 10h Processor Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: Family 10h Processor DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: Family 10h Processor Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k10temp
resources: irq:0
*-pci:8
description: Host bridge
product: Family 10h Processor Link Control
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz



8. Re: Erro de Kernel

Perfil removido
removido

(usa Nenhuma)

Enviado em 23/01/2016 - 15:17h

Se mesmo com o erro a maquina inicia, tente atualizar o sistema e instalar o "microcode" para processadores amd:



sudo su -
apt-get update ; apt-get upgrade
apt-get install amd64-microcode



------------------------------------------------------
KISS principle, RTFM and STFW = 42


9. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 23/01/2016 - 17:04h

fala que nao foi posivel encontrar
root@mauro-desktop:~# apt-get install amd64-microcode
Lendo listas de pacotes... Pronto
Construindo árvore de dependências
Lendo informação de estado... Pronto
E: Impossível encontrar o pacote amd64-microcode



10. Re: Erro de Kernel

Perfil removido
removido

(usa Nenhuma)

Enviado em 23/01/2016 - 18:54h

mss.fra escreveu:

fala que nao foi posivel encontrar
root@mauro-desktop:~# apt-get install amd64-microcode
Lendo listas de pacotes... Pronto
Construindo árvore de dependências
Lendo informação de estado... Pronto
E: Impossível encontrar o pacote amd64-microcode



Certo, analisando aqui, para instalar tera que habilitar o repositório (Oficial) multiverse, então faça:

1 - Habilitar repositório:

sudo add-apt-repository multiverse


2 - Atualize seu ambiente, instale o microcode para AMD e reinicie a maquina:


sudo su -
apt-get update ; apt-get upgrade
apt-get install amd64-microcode
reboot


------------------------------------------------------
KISS principle, RTFM and STFW = 42


11. Re: Erro de Kernel

Mauro Alves da Silva
mss.fra

(usa Debian)

Enviado em 23/01/2016 - 19:17h

ta osso erisrjr segue dando erros e mais erros ,
mauro@mauro-desktop:~$ sudo add-apt-repository multiverse 
[sudo] password for mauro:
Error: 'multiverse' invalid



12. Re: Erro de Kernel

Luiz Santos
luiztux

(usa Gentoo)

Enviado em 23/01/2016 - 19:25h

Qual é a versão do Debian e do Kernel que você está utilizando?

Sabe informar desde quando está aparecendo esta mensagem? Fez algum tipo de alteração antes de aparecer a mensagem?


-----------------------------------''----------------------------------
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.



01 02



Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts