Nesse artigo vamos usar o pppoe-setup, pois é de fácil configuração e nos atende muito bem.

Lembre-se que depois de preencher todos os campos, sempre confirmar com ENTER.

Cada campo está corretamente preenchido, é só prestar atenção e fazer certinho:

# pppoe-setup

Welcome to the Roaring Penguin PPPoE client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...

Looks good! Now, please enter some information:

USER NAME

>> Enter your PPPoE user name (default bxxxnxnx@sympatico.ca): 2124133481

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethn, where 'n' is a number.
(default eth0): eth0

Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. >>>
Enter the demand value (default no): yes

DNS

Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are doing and not modify your DNS setup.
>>> Enter the DNS information here: server

PASSWORD

>>> Please enter your PPPoE password: 2124133481

The firewall choices are:
0. NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules.
1. STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2. MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN
>>> Choose a type of firewall (0-2): 0

** Summary of what you entered **

Ethernet Interface: eth0
User name:          2124133481
Activate-on-demand: Yes; idle timeout = yes seconds
DNS addresses:      Supplied by ISP's server
Firewalling:        NONE

>>> Accept these settings and adjust configuration files (y/n)? y

Finalizando

Bom, já temos nosso roteador montado. Lembrando que para conectarmos no Velox teremos que escrever no shell:

# pppoe-start

Att
Leonardo Dutra