Nesse artigo vamos usar o pppoe-setup
, pois é de fácil configuração e nos atende muito bem.
Lembre-se que depois de preencher todos os campos, sempre
confirmar com ENTER.
Cada campo está corretamente preenchido, é só prestar atenção e fazer certinho:
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
Looks good! Now, please enter some information:
>> Enter your PPPoE user name (default [email protected]
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
, it will be ethn, where 'n' is a number.
(default eth0): eth0
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no): yes
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: server
>>> Please enter your PPPoE password: 2124133481
The firewall choices are:
0. NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1. STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2. MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2): 0
** Summary of what you entered **
Ethernet Interface: eth0
User name: 2124133481
Activate-on-demand: Yes; idle timeout = yes seconds
DNS addresses: Supplied by ISP's server
>>> Accept these settings and adjust configuration files (y/n)? y
Bom, já temos nosso roteador montado. Lembrando que para conectarmos no Velox teremos que escrever no shell: