Logo no início do processo você irá notar a diferença entre o Slackware 10 e o 10.2. Logado como root, dê o seguinte comando:

# pppoe-setup

(que no Slack 10 seria adsl-setup)

Irá aparecer a seguinte mensagem, logo em seguida:

Welcome to the Roaring Penguin PPPoE client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default seulogin@seuprovedor.com.br):

Você terá que digitar o seu login para acesso a Internet, em seguida <ENTER>.

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):

Aqui, você irá configurar sua placa de rede, que normalmente se encontra na eth0. Tecle apenas <ENTER> e siga em frente. Se sua placa de rede estiver em outro lugar, digite o caminho dela. Por exemplo (eth1, eth2, etc). <ENTER>

Siga em frente.

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links.

>>> Enter the demand value (default no):

Aqui é para CONEXÃO sobre DEMANDA, tecle <ENTER>

Hora de informar seus DNS's

DNS

Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup.

>>> Enter the DNS information here:

Aqui você terá que colocar o DNS primário de seu PROVEDOR, irei disponibilizar o da GLOBO, sendo o primário 200.204.0.10. <ENTER>

Please enter the IP address of your ISP's secondary DNS server. If you just press enter, I will assume there is only one DNS server.

>>> Enter the secondary DNS server address here:

Coloque aqui seu DNS secundário, sendo o da GLOBO 200.204.0.158. <ENTER>

Iremos agora colocar nossas senhas.

PASSWORD

>>> Please enter your PPPoE password:

Digite aqui a senha de usada por você para se conectar pelo seu provedor <ENTER>

>>> Please re-enter your PPPoE password:

Digite sua senha novamente. <ENTER>

Escolhendo um Firewall

FIREWALLING

Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN

>>> Choose a type of firewall (0-2):

É apropriado que você use o STANDALONE digitando 1, mas fique por sua escolha. <ENTER>

Vamos agora finalizar nossa configuração...