Ubuntu 12.04 travando [RESOLVIDO]

pregogames
(usa Ubuntu)

Enviado em 18/12/2013 - 20:48h

Eae pessoas, blz? antes de mais nada, quero dizer que sou novo no fórum, então me perdoem caso eu esteja fazendo isso da maneira errada. Enfim, vamos ao problema.
...
Eu sempre fui usuário windows, estava usando o 7 e já estava me dando nos nervos devido aos travamentos, eu não podia deixar ele entrar em modo ocioso que o infeliz já travava, só o mouse funcionava, mas não dava pra clicar em nada.
Então eu comecei a usar o ubuntu, estou usando a última versão em 64bits com um pente de 4GB e dual core 3.0 Ghz. Advinhem só? Ele trava!! :D Antes eu instalei o 32bits mesmo, achei que era por isso e reinstalei usando 64bits. Então comecei a suspeitar que era problema na memória ram; retirei ela, limpei, aproveitei e dei uma limpada nos outros componentes, mas o problema continua. Então eu formatei e reinstalei o mesmo sistema, mas ele continua com essas travadas.
No win, ele o pc só trava em caso de "ociosidade" ou depois de muito tempo ligado, mas no ubuntu não, n ubuntu ele trava a qualquer hora, as vezes quando eu acabo de entrar, ou quando eu abro uma nova aba no navegador (tanto mozila quanto chromium). Eu cheguei a deixar ele assim durante horas, só para ver se ele voltava ao normal, mas não voltou, nem no ubuntu e nem no win. Só para constar, eu procurei ajuda em outros tópicos, mas o problema do pessoal aparenta não ser o mesmo que o meu, já que lá eles conseguiram ajuda e os mesmos passos não deram em nada aqui. Enfim, espero que consigam me ajudar, pq tá difícil desse jeito. Desculpa a redação do enem, boa sorte na resolução desse problema. =]

Buckminster
(usa Debian)

Enviado em 18/12/2013 - 23:21h

Bom, claramente o teu problema é de hardware.

De acordo com o que você falou dos travamentos no Windows depois de algum tempo, poderia ser um problema de aquecimento.
Porém, como no Ubuntu isso não acontece, podemos, à princípio, descartar essa possibilidade.

Dá alguma mensagem de erro ou simplesmente trava e daí só reiniciando com o botão de reset?

Verifique o arquivo /var/log/messages:

# cat /var/log/messages | less

Veja se tem alguma mensagem relativa a algum erro. Mas vou avisando, esse arquivo é grande.

Logo após travar, reinicie a máquina e tente também os comandos:

grep failed /var/log/syslog

e

grep error /var/log/syslog

E também

grep failed /var/log/kern.log

e

grep error /var/log/kern.log


E poste aqui o retorno que der nesses greps acima.

E recomendaria fazer um teste na memória com o Memtest.

clodoaldops
(usa Linux Mint)

Enviado em 19/12/2013 - 08:08h

"Bom, claramente o teu problema é de hardware." +1
Sugiro que leve a um tecnico de confiança p/ uma manutenção/revisão no pc?

pregogames
(usa Ubuntu)

Enviado em 19/12/2013 - 22:35h

Bom, claramente o teu problema é de hardware.

De acordo com o que você falou dos travamentos no Windows depois de algum tempo, poderia ser um problema de aquecimento.
Porém, como no Ubuntu isso não acontece, podemos, à princípio, descartar essa possibilidade.

Dá alguma mensagem de erro ou simplesmente trava e daí só reiniciando com o botão de reset?

Verifique o arquivo /var/log/messages:

# cat /var/log/messages | less
...

Então, como eu disse, sou novo no linux e estou aprendendo alguns comandos agora.
Poderia me dizer mais especificamente como eu uso esse comando ai? Tentei com e sem o "sudo" mas não vai.
Em relação ao teste de memória, eu fiz e passou em tudo, não apresentou nenhuma falha. Como eu não usei ele direito desde essa postagem, ele ainda não apresentou o travamento. Aliás, quando ele trava, ele simplesmente trava e não apresenta nenhuma mensagem de erro, a única alternativa que eu tenho é reiniciar pelo próprio botão do gabinete.

Buckminster
(usa Debian)

Enviado em 19/12/2013 - 23:54h

Se você executou os comandos e, após o 'enter', o prompt simplesmente "pulou" para baixo não dando retorno nenhum (ficando em branco) é porque os arquivos estão vazios.

Foi isso que aconteceu, ou deu alguma mensagem de erro após você dar 'enter'?

Lembre-se que não vai o símbolo '#' na frente do comando, coloquei ele somente para visualizar o prompt. Você deve digitar direto cat /var/log/messages | less.
O 'less' serve para pausar o arquivo para você poder navegar por ele com as setas de direção do teclado.
Para sair, após o comando cat, digite a tecla 'q'.

E os comandos grep você também deve digitar direto, porém não precisa digitar nada para sair. Ele mostra o conteúdo do arquivo e sai automaticamente.

pregogames
(usa Ubuntu)

Enviado em 20/12/2013 - 01:30h

cat /var/log/messages | less (não apresenta nenhuma mensagem de erro, apenas mostra várias linhas com um ~)

Arquivo binário /var/log/kern.log coincide com o padrão

o outro comando que é para syslog, não acontece nada. Tudo procede?

px
(usa Debian)

Enviado em 20/12/2013 - 03:55h

Bom neste caso use o comando dmesg e poste a saída gigantesca dele aqui :(

E também como o memset não acusou nada presumo eu que seja problema de placa de vídeo (mesmo se for onboard, alias essas sim dão mais problemas com o tempo, pelo desgaste mesmo). Também pode ser problemas de aquecimento (tanto de processador, memória ou mesmo a placa de vídeo).

pregogames
(usa Ubuntu)

Enviado em 20/12/2013 - 04:50h

btractive decode)
[ 0.112159] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.112198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.112247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.112266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.112292] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.112294] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.112808] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15)
[ 0.112842] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.112875] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 12 14 15)
[ 0.112907] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.112939] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.112974] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15)
[ 0.113006] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[ 0.113036] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 12 14 15)
[ 0.113104] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.113104] vgaarb: loaded
[ 0.113104] vgaarb: bridge control possible 0000:00:02.0
[ 0.113104] SCSI subsystem initialized
[ 0.113104] ACPI: bus type scsi registered
[ 0.113104] libata version 3.00 loaded.
[ 0.113104] ACPI: bus type usb registered
[ 0.113104] usbcore: registered new interface driver usbfs
[ 0.113104] usbcore: registered new interface driver hub
[ 0.113104] usbcore: registered new device driver usb
[ 0.113104] PCI: Using ACPI for IRQ routing
[ 0.113104] PCI: pci_cache_line_size set to 64 bytes
[ 0.113104] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.113104] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.113104] e820: reserve RAM buffer [mem 0xddd80000-0xdfffffff]
[ 0.113104] NetLabel: Initializing
[ 0.113104] NetLabel: domain hash size = 128
[ 0.113104] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.113104] NetLabel: unlabeled traffic allowed by default
[ 0.113104] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.113104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.113104] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.116011] Switching to clocksource hpet
[ 0.121819] AppArmor: AppArmor Filesystem Enabled
[ 0.121860] pnp: PnP ACPI init
[ 0.121877] ACPI: bus type pnp registered
[ 0.121954] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.121957] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.122003] pnp 00:01: [dma 4]
[ 0.122023] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.122056] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.122077] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.122098] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.122168] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.122171] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122268] system 00:06: [io 0x0400-0x041f] has been reserved
[ 0.122270] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.122272] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.122274] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.122277] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.122279] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.122281] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122341] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.122390] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.122435] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.122438] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122496] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.122498] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.122501] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122540] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.122713] pnp 00:0c: [dma 0 disabled]
[ 0.122762] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.122803] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.122805] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122934] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.122936] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.122939] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.122941] system 00:0e: [mem 0x00100000-0xdddfffff] could not be reserved
[ 0.122943] system 00:0e: [mem 0xf0000000-0xffffffff] could not be reserved
[ 0.122946] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.123035] pnp: PnP ACPI: found 15 devices
[ 0.123036] ACPI: ACPI bus type pnp unregistered
[ 0.129113] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.129117] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.129119] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.129127] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.129136] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.129138] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.129140] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.129142] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.129147] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[ 0.129150] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.129153] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.129155] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.129157] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.129161] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.129165] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff]
[ 0.129168] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.129173] pci 0000:00:1c.1: PCI bridge to [bus 01]
[ 0.129176] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.129180] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.129183] pci 0000:00:1c.1: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.129188] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.129200] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.129220] pci 0000:00:1e.0: setting latency timer to 64
[ 0.129224] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.129225] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.129227] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.129229] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.129231] pci_bus 0000:00: resource 8 [mem 0xdde00000-0xefffffff]
[ 0.129233] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff]
[ 0.129235] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.129236] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf41fffff]
[ 0.129238] pci_bus 0000:02: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.129240] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.129242] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.129243] pci_bus 0000:01: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.129245] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.129247] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.129249] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.129251] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.129252] pci_bus 0000:03: resource 8 [mem 0xdde00000-0xefffffff]
[ 0.129254] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff]
[ 0.129288] NET: Registered protocol family 2
[ 0.129446] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.129698] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.129902] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.129948] TCP: reno registered
[ 0.129955] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.129983] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.130054] NET: Registered protocol family 1
[ 0.130064] pci 0000:00:02.0: Boot video device
[ 0.130187] PCI: CLS 32 bytes, default 64
[ 0.130232] Trying to unpack rootfs image as initramfs...
[ 0.359128] Freeing initrd memory: 15840k freed
[ 0.366593] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.366602] software IO TLB [mem 0xd9d7e000-0xddd7e000] (64MB) mapped at [ffff8800d9d7e000-ffff8800ddd7dfff]
[ 0.366968] Initialise module verification
[ 0.367014] audit: initializing netlink socket (disabled)
[ 0.367030] type=2000 audit(1387487006.364:1): initialized
[ 0.390504] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391894] VFS: Disk quotas dquot_6.5.2
[ 0.391928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392340] fuse init (API version 7.20)
[ 0.392407] msgmni has been set to 7833
[ 0.392718] Key type asymmetric registered
[ 0.392720] Asymmetric key parser 'x509' registered
[ 0.392748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392769] io scheduler noop registered
[ 0.392771] io scheduler deadline registered (default)
[ 0.392775] io scheduler cfq registered
[ 0.392893] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.392973] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.393031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393043] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393079] intel_idle: does not run on family 6 model 23
[ 0.393150] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.393155] ACPI: Power Button [PWRB]
[ 0.393188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.393190] ACPI: Power Button [PWRF]
[ 0.393270] ACPI: Requesting acpi_cpufreq
[ 0.395590] GHES: HEST is not enabled!
[ 0.395657] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.416036] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.417885] Linux agpgart interface v0.103
[ 0.417939] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[ 0.417995] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.418555] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.418677] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.419689] brd: module loaded
[ 0.420242] loop: module loaded
[ 0.420343] ata_piix 0000:00:1f.1: version 2.13
[ 0.420382] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.420578] scsi0 : ata_piix
[ 0.420921] scsi1 : ata_piix
[ 0.421201] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.421203] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.421247] ata_piix 0000:00:1f.2: MAP [
[ 0.421249] P0 P2 P1 P3 ]
[ 0.421280] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.421448] scsi2 : ata_piix
[ 0.421854] scsi3 : ata_piix
[ 0.422131] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 22
[ 0.422133] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 22
[ 0.422351] libphy: Fixed MDIO Bus: probed
[ 0.422405] tun: Universal TUN/TAP device driver, 1.6
[ 0.422407] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.422495] PPP generic driver version 2.4.2
[ 0.422531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.422532] ehci-pci: EHCI PCI platform driver
[ 0.422559] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.422562] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.422568] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.422580] ehci-pci 0000:00:1d.7: debug port 1
[ 0.426487] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.426499] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaf7c00
[ 0.436024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.436058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.436063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.436067] usb usb1: Product: EHCI Host Controller
[ 0.436072] usb usb1: Manufacturer: Linux 3.8.0-34-generic ehci_hcd
[ 0.436076] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.436219] hub 1-0:1.0: USB hub found
[ 0.436223] hub 1-0:1.0: 8 ports detected
[ 0.436328] ehci-platform: EHCI generic platform driver
[ 0.436334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.436344] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.436359] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.436362] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.436366] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.436388] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.436416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.436418] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.436419] usb usb2: Product: UHCI Host Controller
[ 0.436421] usb usb2: Manufacturer: Linux 3.8.0-34-generic uhci_hcd
[ 0.436423] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.436484] hub 2-0:1.0: USB hub found
[ 0.436487] hub 2-0:1.0: 2 ports detected
[ 0.436542] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.436545] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.436549] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.436577] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 0.436603] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.436605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.436607] usb usb3: Product: UHCI Host Controller
[ 0.436609] usb usb3: Manufacturer: Linux 3.8.0-34-generic uhci_hcd
[ 0.436610] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.436676] hub 3-0:1.0: USB hub found
[ 0.436680] hub 3-0:1.0: 2 ports detected
[ 0.436733] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.436736] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.436740] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.436766] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.436792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.436795] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.436796] usb usb4: Product: UHCI Host Controller
[ 0.436798] usb usb4: Manufacturer: Linux 3.8.0-34-generic uhci_hcd
[ 0.436800] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.436860] hub 4-0:1.0: USB hub found
[ 0.436863] hub 4-0:1.0: 2 ports detected
[ 0.436915] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.436918] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.436922] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.436950] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 0.436974] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.436977] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.436978] usb usb5: Product: UHCI Host Controller
[ 0.436980] usb usb5: Manufacturer: Linux 3.8.0-34-generic uhci_hcd
[ 0.436982] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.437045] hub 5-0:1.0: USB hub found
[ 0.437048] hub 5-0:1.0: 2 ports detected
[ 0.437143] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.437145] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.437831] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.437902] mousedev: PS/2 mouse device common for all mice
[ 0.437999] rtc_cmos 00:02: RTC can wake from S4
[ 0.438099] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.438120] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.438193] device-mapper: uevent: version 1.0.3
[ 0.438242] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.438249] cpuidle: using governor ladder
[ 0.438250] cpuidle: using governor menu
[ 0.438256] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.438258] EFI Variables Facility v0.08 2004-May-17
[ 0.438398] ashmem: initialized
[ 0.438494] TCP: cubic registered
[ 0.438575] NET: Registered protocol family 10
[ 0.438717] NET: Registered protocol family 17
[ 0.438728] Key type dns_resolver registered
[ 0.438888] Loading module verification certificates
[ 0.439711] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 253c4f779a04eefe395aecbd137448018b69410b'
[ 0.439725] registered taskstats version 1
[ 0.441681] Key type trusted registered
[ 0.443029] Key type encrypted registered
[ 0.444678] rtc_cmos 00:02: setting system clock to 2013-12-19 21:03:27 UTC (1387487007)
[ 0.445186] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.445187] EDD information not available.
[ 0.457548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.598078] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 0.598184] ata3.01: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 0.598190] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.612152] ata3.00: configured for UDMA/100
[ 0.620248] ata3.01: configured for UDMA/133
[ 0.621858] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5
[ 0.623967] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.623972] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.624133] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.624225] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 0.624963] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 0.625065] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.625071] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 0.625109] sd 2:0:1:0: [sda] Write Protect is off
[ 0.625111] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.625136] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.649467] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 0.649882] sd 2:0:1:0: [sda] Attached SCSI disk
[ 0.651205] Freeing unused kernel memory: 1016k freed
[ 0.651497] Write protecting the kernel read-only data: 12288k
[ 0.654028] Freeing unused kernel memory: 1008k freed
[ 0.656805] Freeing unused kernel memory: 1008k freed
[ 0.669608] udevd[104]: starting version 175
[ 0.710512] Disabling lock debugging due to kernel taint
[ 0.749449] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 0.932030] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.112431] usb 2-1: New USB device found, idVendor=0e8f, idProduct=0020
[ 1.112439] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.112444] usb 2-1: Product: PS2toUSB Adapter
[ 1.112448] usb 2-1: Manufacturer: Green Asia Corp
[ 1.157531] usbcore: registered new interface driver usbhid
[ 1.157537] usbhid: USB HID core driver
[ 1.159795] input: Green Asia Corp PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 1.159981] hid-generic 0003:0E8F:0020.0001: input,hidraw0: USB HID v1.10 Keyboard [Green Asia Corp PS2toUSB Adapter] on usb-0000:00:1d.0-1/input0
[ 1.160454] input: Green Asia Corp PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
[ 1.160605] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Mouse [Green Asia Corp PS2toUSB Adapter] on usb-0000:00:1d.0-1/input1
[ 1.364015] tsc: Refined TSC clocksource calibration: 3000.851 MHz
[ 1.364021] Switching to clocksource tsc
[ 1.433825] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.372306] init: ureadahead main process (256) terminated with status 5
[ 3.096938] Adding 976892k swap on /dev/sda6. Priority:-1 extents:1 across:976892k
[ 3.895305] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.007004] udevd[330]: starting version 175
[ 4.679674] lp: driver loaded but no devices found
[ 5.036041] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 5.517689] intel_rng: FWH not detected
[ 5.682428] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 5.828361] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[ 5.828370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.828394] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.095032] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 6.096698] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.111682] leds_ss4200: no LED devices found
[ 6.228644] [drm] Initialized drm 1.1.0 20060810
[ 6.360324] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 6.713715] i915 0000:00:02.0: setting latency timer to 64
[ 6.736732] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 6.736741] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.736742] [drm] Driver supports precise vblank timestamp query.
[ 6.736776] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.934335] fbcon: inteldrmfb (fb0) is primary device
[ 6.996208] Console: switching to colour frame buffer device 200x56
[ 6.998972] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.998974] i915 0000:00:02.0: registered panic notifier
[ 6.998986] i915: No ACPI video bus found
[ 6.999100] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.999606] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7.064244] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 7.064321] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.064375] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.064423] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.064474] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.907499] type=1400 audit(1387497814.961:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=648 comm="apparmor_parser"
[ 7.907517] type=1400 audit(1387497814.961:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=652 comm="apparmor_parser"
[ 7.907825] type=1400 audit(1387497814.961:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=648 comm="apparmor_parser"
[ 7.907841] type=1400 audit(1387497814.961:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=652 comm="apparmor_parser"
[ 7.908020] type=1400 audit(1387497814.961:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=648 comm="apparmor_parser"
[ 7.908033] type=1400 audit(1387497814.961:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=652 comm="apparmor_parser"
[ 8.498448] init: failsafe main process (733) killed by TERM signal
[ 10.338231] ppdev: user-space parallel port driver
[ 11.238615] Bluetooth: Core ver 2.16
[ 11.238640] NET: Registered protocol family 31
[ 11.238641] Bluetooth: HCI device and connection manager initialized
[ 11.238653] Bluetooth: HCI socket layer initialized
[ 11.238656] Bluetooth: L2CAP socket layer initialized
[ 11.238661] Bluetooth: SCO socket layer initialized
[ 11.328432] Bluetooth: RFCOMM TTY layer initialized
[ 11.328451] Bluetooth: RFCOMM socket layer initialized
[ 11.328453] Bluetooth: RFCOMM ver 1.11
[ 11.369726] type=1400 audit(1387497818.421:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=840 comm="apparmor_parser"
[ 11.370104] type=1400 audit(1387497818.421:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=840 comm="apparmor_parser"
[ 11.485623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.485627] Bluetooth: BNEP filters: protocol multicast
[ 11.485639] Bluetooth: BNEP socket layer initialized
[ 14.115901] type=1400 audit(1387497821.165:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[ 14.116251] type=1400 audit(1387497821.169:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[ 14.116429] type=1400 audit(1387497821.169:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
[ 14.228597] type=1400 audit(1387497821.281:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=899 comm="apparmor_parser"
[ 14.229516] type=1400 audit(1387497821.281:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=899 comm="apparmor_parser"
[ 14.272862] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
[ 14.273350] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 14.342096] type=1400 audit(1387497821.393:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=903 comm="apparmor_parser"
[ 14.342475] type=1400 audit(1387497821.393:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=903 comm="apparmor_parser"
[ 14.345558] type=1400 audit(1387497821.397:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=905 comm="apparmor_parser"
[ 14.345949] type=1400 audit(1387497821.397:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=905 comm="apparmor_parser"
[ 14.426394] type=1400 audit(1387497821.477:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=907 comm="apparmor_parser"
[ 1261.000778] audit_printk_skb: 24 callbacks suppressed
[ 1261.000785] type=1400 audit(1387499065.285:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=854 comm="cupsd" pid=854 comm="cupsd" capability=36 capname="block_suspend"
[ 4212.681464] type=1400 audit(1387502016.965:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=854 comm="cupsd" pid=854 comm="cupsd" capability=36 capname="block_suspend"
[ 4855.163290] Broke affinity for irq 44
[ 4855.164319] smpboot: CPU 1 is now offline
[ 4855.177031] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6024.590898] udevadm: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
[ 7699.040054] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 7699.173271] usb 1-4: New USB device found, idVendor=0e8d, idProduct=0002
[ 7699.173279] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 7699.173284] usb 1-4: Product: MT6225
[ 7699.173288] usb 1-4: Manufacturer: MediaTek Inc
[ 7699.173292] usb 1-4: SerialNumber: 532393400519110
[ 7699.279277] Initializing USB Mass Storage driver...
[ 7699.282445] scsi4 : usb-storage 1-4:1.0
[ 7699.282563] usbcore: registered new interface driver usb-storage
[ 7699.282565] USB Mass Storage support registered.
[ 7700.281175] scsi 4:0:0:0: Direct-Access MEDIATEK FLASH DISK 6225 PQ: 0 ANSI: 0 CCS
[ 7700.282777] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 7700.284415] sd 4:0:0:0: [sdb] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
[ 7700.285276] sd 4:0:0:0: [sdb] Write Protect is off
[ 7700.285284] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7700.286025] sd 4:0:0:0: [sdb] No Caching mode page found
[ 7700.286031] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 7700.289403] sd 4:0:0:0: [sdb] No Caching mode page found
[ 7700.289410] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 7700.293308] sdb: sdb1
[ 7700.297276] sd 4:0:0:0: [sdb] No Caching mode page found
[ 7700.297285] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 7700.297292] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9700.068975] WARNING! power/level is deprecated; use power/control instead
[ 9700.148518] usb 1-4: USB disconnect, device number 3
===========================================================================================================================

Em relação a temperatura, eu usei 2 programas no windows para fazer o teste e ambos apresentaram temperaturas boas. Eu não achei o suporte desses softwares para ubuntu, então usei o "sensors" mesmo. Segue abaixo, o resultado.

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.26 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.36 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.17 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.14 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 1360 RPM (min = 600 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM)
CPU Temperature: +39.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +45.0°C (high = +45.0°C, crit = +95.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +51.0°C (high = +76.0°C, crit = +100.0°C)
Core 1: +43.0°C (high = +76.0°C, crit = +100.0°C)

================================================================================================================================

Alguém pode me dizer uma maneira de verificar a memória e a onboard? PS.:. Nem sei se é possível, mas enfim...

pregogames
(usa Ubuntu)

Enviado em 19/01/2014 - 21:50h

~toc-toc~ Percebi que não foi dado continuidade no post, então estive procurando um jeito de resolver mesmo assim. Pois então, a parte do windows, eu resolvi simplesmente formatando ele e reinstalando, já que nada do que eu fizesse teve efeito. Já a parte do ubuntu, eu percebi que o chrome estava usando em torno de 108% do meu processador, então eu desinstalei ele e passei a usar o Mozilla. PRONTO! Parou de travar.
Além disso, antes de fazer tudo isso, eu fiz um teste na fonte usando um multímetro e tudo estava ok, assim como eu fiz uma limpeza geral dos componentes internos, memória, socket, troquei pasta térmica, limpei toda a sujeira que tinha no cooler, enfim, deixei brilhando. Então é isso, obrigado a todos que tentaram.

Buckminster
(usa Debian)

Enviado em 20/01/2014 - 14:53h

Para verificar a memória você pode usar o Memtest.

pregogames
(usa Ubuntu)

Enviado em 20/01/2014 - 20:34h

Então bro, foi o que eu disse. Eu usei o MEMtest para verificar a memória e deu tudo OK. Só adiantando, eu também procurei por BADBLOCKS com medo de ser o meu HD indo pro "saco", mas felizmente não foi encontrado nada.