Mouse opitico não funciona

Lucasmr
(usa Debian)

Enviado em 08/05/2016 - 00:51h

Olá, intalei recentemente o Ubuntu 16.04 e não estou conseguindo usar meu mouse opitico. Ele funciona quando eu vou colocar minha senha e funcionou durante toda a instalação. Como devo proceder para corrigir isso? Obrigado.

removido
(usa Nenhuma)

Enviado em 08/05/2016 - 00:58h

Veja se estes pacotes estão instalados

ii  xserver-xorg-input-mouse                 1:1.9.1-1                            amd64        X.Org X server -- mouse input driver

ii  xserver-xorg-input-synaptics             1.8.1-1                              amd64        Synaptics TouchPad driver for X.Org server 

Com o comando

dpkg -l | grep -E 'xserver.+(mouse|synaptics)'

----------------------------------------------------------------------------------------------------------------

hellmans
(usa Ubuntu)

Enviado em 08/05/2016 - 03:25h

Problemas com mouse usb (óptico) o qual foi inserido após a instalação do Ubuntu com outro mouse:

1. Recarregue o driver do mouse (usbhid):

sudo rmmod usbhid

sudo modprobe usbhid 

2. Adicione usbhid ao arquivo /etc/modules (normalmente o sistema carrega o usbhid, mas colocando-o novamente pode ser um reforço);

sudo gedit /etc/modules 

Adicione à última linha: usbhid, salve e faça um teste reiniciando a máquina.


3. Digite o seguinte comando, então reinicie (não sei se dá algum resultado):

echo "on" | sudo tee /sys/bus/usb/devices/usb*/power/control 

4. Ou, um problema com o gerenciamento de energia, instale o pacote tlp:

sudo apt install tlp -y

sudo tlp start 

5. Ou, o problema com o gerenciamento de energia deve ser desinstalado (laptop-mode-tools):

sudo apt remove laptop-mode-tools

sudo reboot 

----------------------------------------------------------------------------------------------------------------
Conclusão:

Para mim, o 1º passo funciona na hora! Embora não tenha funcionado quando reiniciei o computador, então executei os outros passos, o tlp não teve nenhum resultado significativo para mim já que uso o notebook direto na tomada (bateria viciada)! O laptop-mode-tools não estava presente na instalação padrão do Ubuntu 16.04 LTS.

Ao final, o meu problema foi resolvido.

Encontrei algumas informações para criar um módulo de automação do udev e alguns dados para forçar o usbhid (genérico) com a utilização do nut.






Este tutorial foi fundamentado e retirado de um fórum em inglês.
Fonte: http://askubuntu.com/questions/506673/usb-mouse-not-working-after-unplug-plug-in-14-04

Traduzido e formatado: Rafael Andrade de Medeiros.

progerio
(usa Ubuntu)

Enviado em 19/05/2016 - 16:25h

Tive o mesmo problema após instalação limpa do 16.04 e resolvi da seguinte maneira:

1 - vá em configurações do sistema / programa e atualizações / opções do programador;
2 - ative atualizações de pré lançamento (xenial-proposed) ao sair clique em recarregar;
3 Abra o terminal e execute sudo apt-get update e depois sudo apt-get upgrade -s;

Você observara que o sistema vai fazer uma nova atualização diferente importando pacotes para o gnome e kernel

Apos o termino reinicie o sistema.

No meu caso ficou tudo perfeito:

(segue informações do dispositivo)

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 0
Kernel modules: ati_agp

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Foxconn International, Inc. SB600 Non-Raid-5 SATA
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at c000 [size=8]
I/O ports at b000 [size=4]
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=16]
Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. SB600 USB (OHCI0)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. SB600 USB (OHCI1)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. SB600 USB (OHCI2)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. SB600 USB (OHCI3)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. SB600 USB (OHCI4)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. SB600 USB Controller (EHCI)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
Subsystem: Foxconn International, Inc. SBx00 SMBus Controller
Flags: bus master, fast devsel, latency 0
I/O ports at 0b00 [disabled] [size=16]
Memory at <ignored> (64-bit, non-prefetchable) [disabled]
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Foxconn International, Inc. SB600 IDE
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, pata_acpi

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: Foxconn International, Inc. SBx00 Azalia (Intel HDA)
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
Subsystem: Foxconn International, Inc. SB600 PCI to LPC Bridge
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: feb00000-febfffff

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
Flags: fast devsel

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at d000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
Subsystem: Micro-Star International Co., Ltd. [MSI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at fe9bc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 01)
Subsystem: Foxconn International, Inc. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 26
I/O ports at e800 [size=256]
Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

03:01.0 Network controller: Ralink corp. RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G v4.1
Flags: bus master, slow devsel, latency 64, IRQ 21
Memory at febf8000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
Kernel modules: rt61pci

clodoaldops
(usa Linux Mint)

Enviado em 19/05/2016 - 16:28h

https://www.vivaolinux.com.br/dica/Mouse-USB-nao-reconhece-no-Ubuntu-Alguns-passos-que-podem-ajudar/

manoelmarins
(usa Ubuntu)

Enviado em 13/08/2016 - 21:43h

Boa noite!

O meu mouse usb para de funcionar após o login no sistema.

manoelmarins
(usa Ubuntu)

Enviado em 16/08/2016 - 20:51h

Boa noite!

Utilizei vários métodos para instalar o mouse usb, mas nada deu certo, o comando sudo rmmod usbhid funciona na hora, mas deposi para de funcionar.

Preciso de uma ajuda.

manoelmarins
(usa Ubuntu)

Enviado em 16/08/2016 - 21:45h

Funcionou removendo o arquivo gnome-software-service.desktop em "/etc/xdg/autostart/gnome-software-service.desktop", mas editei o arquivo /etc/fwupd.conf e alterei a opção EnableOptionROM para false.

Segue link.
http://askubuntu.com/questions/763511/usb-mouse-not-working-after-installing-ubuntu-16-04-persistent...