Wireless [RESOLVIDO]

1. Wireless [RESOLVIDO]

Gilson Zanerippe Bartholdy
Agent Orange

(usa Slackware)

Enviado em 14/10/2005 - 09:05h

Olá amigos do Linux, bom, gostaria de pedir ajuda de alguém para poder configurar minha placa wireless Planet 8103 com Chipset 8180, se alguém puder eu posto as configurações aqui para que possam me ajudar e ver se está certo, alguém poderia me ajudar?Uso o Slackware 10.2, mais o KDE, instalei o Wireless Tools e o Ndiswrapper.


  


2. configurando a placa wireless

jean michael gandin
_m4n14c_

(usa Slackware)

Enviado em 14/10/2005 - 11:58h

o shimatai escreveu um otimo artigo sobre como configurar a placa wireless com os drivers windows, via ndiswrapper. Eu postei um script pra ligar automaticamente a rede wlan. sugiro que vc leia o artigo e de uma olhadinha no script.

Artigo do shimatai: http://www.vivaolinux.com.br/artigos/verArtigo.php?codigo=1183


3. Parte 2

Gilson Zanerippe Bartholdy
Agent Orange

(usa Slackware)

Enviado em 14/10/2005 - 18:01h

Olá amigos, irei tentar e posto o resultado, de qualquer forma devo adiantar que eu utilizei a dica do shimatai, estou colocando aqui o resultado, pois com ele eu consegui ativar a placa, ela está a tiva e pingando legal, mas não navega, devo ter esquecido algo.

root@darkstar:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:08.0 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
root@darkstar:~# ndiswrapper -h
Usage: ndiswrapper OPTION

Manage ndis drivers for ndiswrapper.
-i inffile Install driver described by 'inffile'
-d devid driver Use installed 'driver' for 'devid'
-e driver Remove 'driver'
-l List installed drivers
-m Write configuration for modprobe


where 'devid' is either PCIID or USBID of the form XXXX:XXXX
root@darkstar:~# -l
-bash: -l: command not found
root@darkstar:~# ndiswrapper -i /root/NET8180.INF
net8180 is already installed. Use -e to remove it
root@darkstar:~# ndiswrapper -l
Installed ndis drivers:
net8180 driver present, hardware present
root@darkstar:~# modprobe ndiswrapper
root@darkstar:~# lsmod
Module Size Used by Not tainted
ndiswrapper 150548 1
snd-pcm-oss 36736 0 (unused)
snd-mixer-oss 12376 0 [snd-pcm-oss]
usb-storage 62432 0 (unused)
8139too 13928 0 (unused)
mii 2272 0 [8139too]
crc32 2880 0 [8139too]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 59148 1 [ndiswrapper usb-storage uhci ehci-hcd]
snd-via82xx 13376 0
gameport 1420 0 [snd-via82xx]
snd-ac97-codec 58556 0 [snd-via82xx]
snd-pcm 54344 0 [snd-pcm-oss snd-via82xx snd-ac97-codec]
snd-timer 13764 0 [snd-pcm]
snd-mpu401-uart 3136 0 [snd-via82xx]
snd-rawmidi 12480 0 [snd-mpu401-uart]
snd-seq-device 3812 0 [snd-rawmidi]
snd 32772 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
snd-page-alloc 4712 0 [snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-rawmidi snd-seq-device snd]
soundcore 3396 4 [snd]
pcmcia_core 39172 0
ntfs 51232 0 (autoclean)
ide-scsi 9392 0
root@darkstar:~# /sbin/iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:02:78:E4:E4:2B
ESSID:"PD-IBIRUBA/CIVIL:OMNI"
Protocol:IEEE 802.11b
Mode:Managed
Frequency:2.462 GHz (Channel 11)
Quality:0/100 Signal level:-72 dBm Noise level:-256 dBm
Encryption key:off
Bit Rate:11 Mb/s
Extra:bcn_int=100
Extra:atim=0

root@darkstar:~# /sbin/iwconfig wlan0 essid "PD-IBIRUBA/CIVIL:OMNI" mode Managed channel 11 rate auto enc off
root@darkstar:~# /sbin/ifconfig wlan0 up
root@darkstar:~# /sbin/iwconfig wlan0
wlan0 IEEE 802.11b ESSID:"PD-IBIRUBA/CIVIL:OMNI"
Mode:Managed Frequency:2.462 GHz Access Point: 00:02:78:E4:E4:2B
Bit Rate:11 Mb/s Tx-Power:20 dBm Sensitivity=0/3
RTS thr:2432 B Fragment thr:2432 B
Encryption key:off
Power Management:off
Link Quality:100/100 Signal level:-72 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

root@darkstar:~#iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11b ESSID:"PD-IBIRUBA/CIVIL:OMNI"
Mode:Managed Frequency:2.462 GHz Access Point: 00:02:78:E4:E4:2B
Bit Rate:11 Mb/s Tx-Power:20 dBm Sensitivity=0/3
RTS thr:2432 B Fragment thr:2432 B
Encryption key:off
Power Management:off
Link Quality:100/100 Signal level:-72 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0




4. Consegui!!!!!!!

Gilson Zanerippe Bartholdy
Agent Orange

(usa Slackware)

Enviado em 14/10/2005 - 22:36h

Olá pessoal, eu finalmente consegui configurar a net no Slackware 10.2, obrigado quem me deu dicas, valeu mesmo, eu fiz exatamente como dizia no artigo do shimatai.






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts