Acesso Negado Samba4 [RESOLVIDO]

1. Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 15/07/2018 - 23:03h

Ola pessoal,
Estu tendo muito dificuldade em compartilhar pastas no meu PC Debian Stretch com Samba4. Ja tentei de tudo e fica dando acesso negado, mesmo com o smb.conf padrao copiado de outra maquina funcionando, o pior é que ate em pastas publicas o acesso é negado, por favor me ajudem. Ja tentei varias configuraçoes de samba, ja tentei com Ubuntu 18.04, ate mesmo o arquivo smb.client de maquinas recem formatadas e funcionando. quando coloco no meu PC ainda continua acesso negado.


  


2. Re: Acesso Negado Samba4 [RESOLVIDO]

Mauriciodez
Mauriciodez

(usa Debian)

Enviado em 15/07/2018 - 23:59h

.
.
.
.
Tenta um tutorial básico .... se vc não conseguir, aí a gente tenta descobrir o que está errado aí .

https://www.vivaolinux.com.br/artigo/Configuracao-definitiva-do-Samba/

------------------------------------------| Linux User #621728 |-----------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------| Linux User #621728 |-----------------------------------------



3. Re: Acesso Negado Samba4 [RESOLVIDO]

Carl Gustav Mikael Av Gillberg Murto
murto

(usa Debian)

Enviado em 16/07/2018 - 09:47h

Bom dia,
se vc fez tudo certo igual o primeiro samba, usuarios etc, vá na pasta que vc compartilha e dê um chmod 777 -R pasta. Já resolví assim.

Abraço e boa sorte


4. Re: Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 16/07/2018 - 18:35h

murto escreveu:

Bom dia,
se vc fez tudo certo igual o primeiro samba, usuarios etc, vá na pasta que vc compartilha e dê um chmod 777 -R pasta. Já resolví assim.

Abraço e boa sorte


Ja tentei de tudo mesmo, ate sites em ingles etc.. Ja fui dormir de madrugada tem tres dias e nada, vou instalar o Ubuntu Mate e digo o resultado.




5. Re: Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 17/07/2018 - 12:01h

Ola amigos.
Deois de trocar o Debian pelo Ubuntu ate consegui fazer o compartilhamento, mas a asta publica fica sem acesso, somente depois de logar com usuario e senha em outra pasta é que a Publica fica liberada sem senha.


6. Re: Acesso Negado Samba4 [RESOLVIDO]

Mauriciodez
Mauriciodez

(usa Debian)

Enviado em 17/07/2018 - 12:25h

elitonjt escreveu:

Ola amigos.
Deois de trocar o Debian pelo Ubuntu ate consegui fazer o compartilhamento, mas a asta publica fica sem acesso, somente depois de logar com usuario e senha em outra pasta é que a Publica fica liberada sem senha.


A principio vc fez como o tutorial que te mandei ou fez na louca por conta própria !!!

manda pra gente o smb.conf e a saida do 'testparm' !!!

------------------------------------------| Linux User #621728 |-----------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------| Linux User #621728 |-----------------------------------------



7. Re: Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 17/07/2018 - 12:27h

A principio quando tento acessr a pasta publica dá acesso negado, daí eu tenho que tentar acessar uma pasta com senha, ai depois de acessar uma pasta com usuario e senha a pasta publica fica liberada!!!



8. Re: Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 17/07/2018 - 12:51h

Vou colocar o testparm e smb.conf abaixo, o interessante é que se eu iniciar a maquina e tentar acessar logo a pasta publica dá acesso negado, daí eu tenho que acessar a pasta home, colocar usuario e senha, ai libera tudo inclusive a pasta publica fica liberada sem senha, mas isso só acontece se eu entrar com usuario e senha na pasta home.

TESTPARM
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Processing section "[usuario]"
Processing section "[shared]"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
dns proxy = No
log file = /var/log/samba/log.%m
map to guest = Bad User
max log size = 1000
obey pam restrictions = Yes
pam password change = Yes
panic action = /usr/share/samba/panic-action %d
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
passwd program = /usr/bin/passwd %u
security = USER
server role = standalone server
server string = %h server (Samba, Ubuntu)
syslog = 0
unix password sync = Yes
usershare allow guests = Yes
wins support = Yes
workgroup = VMWARE
idmap config * : backend = tdb


[printers]
browseable = No
comment = All Printers
create mask = 0700
path = /var/spool/samba
printable = Yes


[print$]
comment = Printer Drivers
path = /var/lib/samba/printers


[usuario]
comment = pasta do usuario
path = /home/eliton/
valid users = eliton


[shared]
guest ok = Yes
path = /home/eliton/shared/
read only = No

SMB.CONF
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = VMWARE

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
security = user

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

#Pasta usuario
[usuario]
comment = pasta do usuario
path = /home/eliton/
browseable = yes
read only = yes
writable = no
valid users = eliton

#Comparilhamento
[shared]
path = /home/eliton/shared/
browseable = yes
read only = no
guest ok = yes
public = yes
available = yes



9. Re: Acesso Negado Samba4 [RESOLVIDO]

Atel Batista
telbatista

(usa Slackware)

Enviado em 17/07/2018 - 15:30h

elitonjt escreveu:

Vou colocar o testparm e smb.conf abaixo, o interessante é que se eu iniciar a maquina e tentar acessar logo a pasta publica dá acesso negado, daí eu tenho que acessar a pasta home, colocar usuario e senha, ai libera tudo inclusive a pasta publica fica liberada sem senha, mas isso só acontece se eu entrar com usuario e senha na pasta home.

TESTPARM
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Processing section "[usuario]"
Processing section "[shared]"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
dns proxy = No
log file = /var/log/samba/log.%m
map to guest = Bad User
max log size = 1000
obey pam restrictions = Yes
pam password change = Yes
panic action = /usr/share/samba/panic-action %d
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
passwd program = /usr/bin/passwd %u
security = USER
server role = standalone server
server string = %h server (Samba, Ubuntu)
syslog = 0
unix password sync = Yes
usershare allow guests = Yes
wins support = Yes
workgroup = VMWARE
idmap config * : backend = tdb


[printers]
browseable = No
comment = All Printers
create mask = 0700
path = /var/spool/samba
printable = Yes


[print$]
comment = Printer Drivers
path = /var/lib/samba/printers


[usuario]
comment = pasta do usuario
path = /home/eliton/
valid users = eliton


[shared]
guest ok = Yes
path = /home/eliton/shared/
read only = No

SMB.CONF
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = VMWARE

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
security = user

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

#Pasta usuario
[usuario]
comment = pasta do usuario
path = /home/eliton/
browseable = yes
read only = yes
writable = no
valid users = eliton

#Comparilhamento
[shared]
path = /home/eliton/shared/
browseable = yes
read only = no
guest ok = yes
public = yes
available = yes


Boa tarde! Tenta isso:

[usuario]
comment = pasta do usuario
path = /home/eliton/
browseable = yes
read only = yes
writable = no
force directory mode = 777
force create mode = 777
valid users = eliton
________________________

[shared]
path = /home/eliton/shared/
browseable = yes
writeable = yes
guest ok = yes
public = yes
force directory mode = 777
force create mode = 777
available = yes
____________________________
P.S: Não esquece de adicionar o usuário ao grupo samba - Criar um usuário samba: smbpasswd -a usuário


10. Re: Acesso Negado Samba4 [RESOLVIDO]

Mauriciodez
Mauriciodez

(usa Debian)

Enviado em 17/07/2018 - 15:47h

Olha só ... aqui os parametros da configuração Pública e Com senha

[global]
security = user
map to guest = Bad Password

[Privado]
comment = Compartilhamento Privado
path = /home/mauricio/Privado
public = no
writable = yes
valid users = mauricio

[publico]
comment = Compartilhamento Público
path = /home/mauricio/Público
browseable = yes
writable = yes
guest ok = yes
create mask = 0777
directory mask = 0777


Nessa configuração, para o diretório "Privado", vai exigir senha e login e somente o usuário "mauricio" tem permissão.

Já no compartilhamento "Público" a parada tá livre para qualquer user !!

Adapte às suas necessidades.

Abçs

------------------------------------------| Linux User #621728 |-----------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------| Linux User #621728 |-----------------------------------------



11. Re: Acesso Negado Samba4

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 19/07/2018 - 20:09h

Vou desistir, ja instalei, formatei, tentei varias formas e continua dando acesso negado... O interessante é que quando instalo em VMWARE tudo funciona bem, pasta publicas e tudo, mas quando instalo na maquina fisica fica dando isso, ja nao sei nem o que fazer mais!!! Se eu pegar o arquivo smb.conf que esta funcionando na maquina virtual e colocar na maquina fisica fica do mesmo jeito.. Ja fiz ate uma instalação minima, wem modo grafico, e coloquei APENAS o samba, e mesmo assim fica dando acesso negado... Se eu faço a instalação em VMWARE, seguindo exatamente os mesmos passos tudo funciona perfeitamente, se usar os mesmos passos na maquina fisica nao funciona. Ja tentei Debian, Ubuntu, MATE, Gnome-Shell, instalação minima em modo texto.. Sempre dá acesso negado


12. Re: Acesso Negado Samba4 [RESOLVIDO]

Eliton Justino Torres
elitonjt

(usa Debian)

Enviado em 29/07/2018 - 16:45h

Consegui resolver!!!
O problema era a pasta do usuario! Pois toda vez que eu reinstalava o debian ou ubuntu usava a mesma pasta do usuario, e sempre dava acesso negado, nao sei como estava bloqueando, mas a solucao foi criar outro usuario!






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner
Linux banner
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts