Como usar conexao discada no Fedora 7

removido
(usa Nenhuma)

Enviado em 08/08/2007 - 09:59h

Olá galera que curte fedora. Eu era usuário red hat e migrei para o fedora 7. No red hat eu conseguia me conectar beleza à internet usando um modem bem famoso: sm56 speaker phone da motorola.
Bom, instalei o fedora 7 gnome, quero me conectar à internet usando esse modem. Não sei como discar a conexão, e além disso, ao "passar" o scanmodem, obtive o seguinte arquivo modemdata.txt:
Only plain text email is forwarded by the DISCUSS@linmodems.org List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry

Fedora release 7 (Moonshine)
Kernel kernel 2.6.21-1.3194.fc7
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country

Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org

.
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Fedora

release 7 (Moonshine)
Kernel
Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP

Wed May 23 22:35:01 EDT 2007
scanModem update of: 2007_August_04


ALSAversion 1.0.14rc2
USB modem not detected by lsusb

Modem or host audio card

candidates have firmware information:

PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:09.0

1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem

Modem interrupt assignment and sharing:

--- Bootup diagnostics for card in PCI

slot 00:09.0 ----
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16
0000:00:09.0: ttyS2 at I/O 0x9008 (irq = 16) is a 16450
0000:00:09.0: ttyS3 at I/O

0x9010 (irq = 16) is a 8250
Couldn't register serial port 0000:00:09.0: -28

=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing

cogent software ===

For candidate modem in PCI bus: 00:09.0
Class 0703: 1057:3052 Modem: Motorola SM56 Data Fax Modem
Primary PCI_id 1057:3052


Support type needed or chipset: slamr



1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to

support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is

a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:


http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre

about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage,

read the Smartlink.txt

The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for

follow through guidance.

Writing Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The

base of the UDEV device file system is: /dev/.udev

The kernel was compiled with gcc version 4.1.2 and a compiler is not installed

Kernel-header resources needed for

compiling are not manifestly ready!

If compiling is necessary packages must be installed, providing:
gcc-4.1 kernel-source-2.6.21-1.3194.fc7


If a driver

compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For

Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may

be on the install CD, others may have to be found through http://packages.ubuntu.com

For Ubunut feisty, additional packages required were:
build-essential curl

debhelper dpkg-dev g++ g++-4.1 gettext git-core gitk
html2text intltool-debian kernel-package kernel-wedge libc6-dev
libcurl3-gnutls libdigest-sha1-perl liberror-perl

libstdc++6-4.1-dev
linux-libc-dev po-debconf rcs tcl8.4 tk8.4


Checking pppd properties:
-r-xr-xr-x 1 root root 312332 2006-12-01 09:54 /usr/sbin/pppd

In case of

an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:


$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of:

/etc/ppp/options
lock

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see

http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with

Browser naviagation.

Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem

symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",

NAME="%k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:

Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n

/etc/module.conf files:

--------- end modem support lines --------


Para quem teve paciência de olhar esse documento, a minha pergunta é: já que ele identificou o meu modem, como ativá-lo?

sermart
(usa Fedora)

Enviado em 01/09/2007 - 16:01h

Este modem não tem pacotes para kernel 2.6 portanto ele não vai funcionar no seu fedora 7. Você devia ter ficado no red hat pois lá o kernel é linha 2.4 que tem drive disponivel ou então você compila um kernel 2.4 e deixa disponivel no seu fedora 7 iniciando por ele para poder conectar, entendeu?

removido
(usa Nenhuma)

Enviado em 06/09/2007 - 18:40h

Sei. Mas acho que compilar o kernel 2.4 seria uma regressão...
EU estou com um modem pctel amr no ponto para instalá-lo no pc. Você sabe se o fedora 7 reconhece bem esse modem?
vlw