NAO CONSIGO FORMATAR MEU HD

1. NAO CONSIGO FORMATAR MEU HD

jpporto01
(usa Ubuntu)

Enviado em 11/01/2021 - 13:15h

Realizei o smartctl para ver possíveis erros e o resultado foi esse:
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 3.5
Device Model: ST1000DM010-2EP102
Serial Number: Z9ACH30X
LU WWN Device Id: 5 000c50 0a2986559
Firmware Version: CC43
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Mon Jan 11 13:09:25 2021 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 103) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 063 006 Pre-fail Always - 59526872
3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 080 080 020 Old_age Always - 20976
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 161576263
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6126
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 080 080 020 Old_age Always - 20948
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 12
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 21
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 051 040 Old_age Always - 38 (Min/Max 38/38)
193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 20991
194 Temperature_Celsius 0x0022 038 017 000 Old_age Always - 38 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 003 001 000 Old_age Always - 59526872
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6055h+12m+51.003s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 27892969438
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 27663463425

SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 12 occurred at disk power-on lifetime: 2685 hours (111 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:26:24.081 READ DMA EXT
35 00 08 d8 65 57 e9 00 00:26:24.080 WRITE DMA EXT
25 00 08 98 01 a0 e0 00 00:26:24.071 READ DMA EXT
35 00 08 90 58 65 e0 00 00:26:24.071 WRITE DMA EXT
35 00 08 a0 37 5f e0 00 00:26:24.071 WRITE DMA EXT

Error 11 occurred at disk power-on lifetime: 2685 hours (111 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:26:21.583 READ DMA EXT
35 00 08 a8 8a 07 e0 00 00:26:21.582 WRITE DMA EXT
25 00 08 ff ff ff ef 00 00:26:21.569 READ DMA EXT
35 00 08 68 f8 88 e1 00 00:26:21.568 WRITE DMA EXT
25 00 08 e8 7c f0 e0 00 00:26:21.518 READ DMA EXT

Error 10 occurred at disk power-on lifetime: 2685 hours (111 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:26:19.242 READ DMA EXT
25 00 08 a8 e0 cc e3 00 00:26:19.235 READ DMA EXT
25 00 08 38 99 7c e0 00 00:26:19.084 READ DMA EXT
35 00 08 e8 5f 65 e0 00 00:26:19.084 WRITE DMA EXT
35 00 10 90 37 5f e0 00 00:26:19.084 WRITE DMA EXT

Error 9 occurred at disk power-on lifetime: 2685 hours (111 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:26:16.820 READ DMA EXT
25 00 80 ff ff ff ef 00 00:26:16.793 READ DMA EXT
25 00 00 ff ff ff ef 00 00:26:16.784 READ DMA EXT
25 00 00 ff ff ff ef 00 00:26:16.783 READ DMA EXT
25 00 00 ff ff ff ef 00 00:26:16.782 READ DMA EXT

Error 8 occurred at disk power-on lifetime: 2685 hours (111 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:26:08.656 READ DMA EXT
35 00 08 08 84 ba e3 00 00:26:08.656 WRITE DMA EXT
35 00 10 10 3f 62 e0 00 00:26:08.654 WRITE DMA EXT
35 00 00 ff ff ff ef 00 00:26:08.653 WRITE DMA EXT
35 00 00 ff ff ff ef 00 00:26:08.653 WRITE DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 00% 6126 -
# 2 Short offline Completed without error 00% 6126 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

0 0

Quote