Conte-nos um pouco sobre seu Sistema, PC, Notebook, etc [RESOLVIDO]

edps
(usa Slackware)

Enviado em 03/10/2015 - 13:38h

Olá pessoal boa tarde, venho convidá-los a postar as características de seu sistema neste post.

Para tal, podemos fazer uso do script inxi:

~ » wget -nv smxi.org/inxi && chmod +x inxi; sudo mv inxi /usr/local/bin/

~ » inxi -F   ### LEIA AS INFORMAÇÕES ABAIXO.

 

ANTES DE POSTAR OS RESULTADOS, deixe o campo mac address em branco ou assim:

mac: XX:XX:XX:XX:XX:XX 

Ou execute o comando inxi seguido das opções em separado, como em:

$ inxi -c 10 -SMCfGANxDPRI 

Onde:

 -c10 = COR VERDE



 -S   = SISTEMA

 -M   = MÁQUINA

 -Cf  = PROCESSADOR E FLAGS

 -G   = GPU

 -A   = AUDIO

 -Nx  = INFORMAÇÕES RESUMIDAS DA REDE

 -D   = DISCOS

 -P   = PARTIÇÕES

 -R  =  INFORMAÇÕES SOBRE RAID (AQUI OMITIDAS)

 -I   = INFORMAÇÕES EXTRAS

 

Exemplo: http://i.imgur.com/Cdgb8cx.png

O meu resultado foi este:

~ » inxi -F

System:    Host: slackware.slack.org Kernel: 4.2.2-smp i686 (32 bit)

           Desktop: Openbox 3.6.1 Distro: Slackware 14.1

Machine:   Mobo: Gigabyte model: GA-K8N-SLi Bios: Award v: F7 date: 02/08/2006

CPU:       Single core AMD Athlon 64 3000+ (-UP-) cache: 512 KB

           speed: 1800 MHz (max)

Graphics:  Card: NVIDIA G96 [GeForce 9400 GT]

           Display Server: X.Org 1.17.2 drivers: nouveau (unloaded: nv,vesa)

           Resolution: 1920x1080@60.00hz

           GLX Renderer: Gallium 0.4 on NV96 GLX Version: 3.0 Mesa 11.0.2

Audio:     Card NVIDIA CK804 AC'97 Audio Controller driver: snd_intel8x0

           Sound: Advanced Linux Sound Architecture v: k4.2.2-smp

Network:   Card: NVIDIA CK804 Ethernet Controller driver: forcedeth

           IF: eth0 state: up speed: 100 Mbps duplex: full

           mac: XX:XX:XX:XX:XX:XX

Drives:    HDD Total Size: 900.2GB (35.4% used)

           ID-1: /dev/sda model: ST500DM002 size: 500.1GB

           ID-2: /dev/sdb model: SAMSUNG_HD400LJ size: 400.1GB

Partition: ID-1: / size: 92G used: 15G (17%) fs: ext4 dev: /dev/sdb2

           ID-2: swap-1 size: 5.09GB used: 0.00GB (0%) fs: swap dev: /dev/sdb6

           ID-3: swap-2 size: 1.07GB used: 0.01GB (1%) fs: swap dev: /dev/zram0

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 60.0

           Fan Speeds (in rpm): cpu: N/A

Info:      Processes: 123 Uptime: 3:17 Memory: 1909.9/3031.8MB

           Client: Shell (zsh) inxi: 2.2.28 

~ » 

 

* como podem ver é uma máquina poderosa (se estivéssemos em 2005!) rsrs.

t+

lcavalheiro
(usa Slackware)

Enviado em 03/10/2015 - 14:46h

Quanto a minha... se você não quiser jogar nada que peça muito da máquina ela ainda dá muito caldo...

System:    Host: slacknote.profcavalheiro.com Kernel: 4.1.6 x86_64 (64 bit) Desktop: Xfce 4.12.3

           Distro: Slackware 14.1

Machine:   System: Dell (portable) product: Inspiron N4050

           Mobo: Dell model: 0X0DC1 v: A08 Bios: Dell v: A08 date: 08/03/2012

CPU:       Dual core Intel Core i3-2350M (-HT-MCP-) cache: 3072 KB 

           clock speeds: max: 2300 MHz 1: 950 MHz 2: 1235 MHz 3: 1008 MHz 4: 1286 MHz

Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller

           Display Server: X.Org 1.17.2 drivers: intel (unloaded: vesa) Resolution: 1366x768@60.10hz

           GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 11.0.2

Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel

           Sound: Advanced Linux Sound Architecture v: k4.1.6

Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169

           IF: eth0 state: down mac: d0:67:e5:f7:94:2d

           Card-2: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k

           IF: wlan0 state: up mac: me:ia:mo:le:du:ra

Drives:    HDD Total Size: 500.1GB (47.4% used) ID-1: /dev/sda model: ST500LM012_HN size: 500.1GB

Partition: ID-1: / size: 50G used: 12G (24%) fs: ext4 dev: /dev/sda3

           ID-2: /boot size: 488M used: 38M (9%) fs: ext4 dev: /dev/sda2

           ID-3: /home size: 401G used: 202G (54%) fs: ext4 dev: /dev/sda5

           ID-4: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/sda1

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 56.0C mobo: N/A

           Fan Speeds (in rpm): cpu: N/A

Info:      Processes: 161 Uptime: 28 min Memory: 926.5/3857.9MB Client: Shell (bash) inxi: 2.2.28  

Gostei desse script, ele dá saídas coloridas pro negócio todo.
--
Luís Fernando Carvalho Cavalheiro
Public GPG signature: 0x246A590B
Só Slackware é GNU/Linux e Patrick Volkerding é o seu Profeta

removido
(usa Nenhuma)

Enviado em 03/10/2015 - 14:52h

Boa tarde,

Fico devendo Edinaldo. Todo sábado agora aqui em Barueri/ SP é assim, sem luz. Desde as 9:30hs até agora. Todo trabalho parado...@$#%+@%$* uta....

Quem sabe amanhã passo os meus.....

Att,
Jbaf 2015
Fedora 21,22(MATE), Ubuntu LTS(GNOME 2)
https://getfedora.org/pt_BR/

removido
(usa Nenhuma)

Enviado em 03/10/2015 - 15:12h

Gostei desse script!

Meu desktop atual:

~ $ inxi -F

System:    Host: ruan-desktop.blacksun Kernel: 4.1.7 x86_64 (64 bit)

           Desktop: KDE Plasma 4.14.6 Distro: Slackware 14.1

Machine:   Mobo: ASUSTeK model: P5G41T-M LX2/BR v: Rev X.0x

           Bios: American Megatrends v: 0407 date: 01/17/2011

CPU:       Dual core Intel Core2 Duo E6550 (-MCP-) cache: 4096 KB 

           clock speeds: max: 2336 MHz 1: 2336 MHz 2: 2336 MHz

Graphics:  Card: NVIDIA GF119 [GeForce GT 520]

           Display Server: X.Org 1.14.3 driver: nvidia

           Resolution: 1600x900@60.0hz

           GLX Renderer: GeForce GT 520/PCIe/SSE2

           GLX Version: 4.5.0 NVIDIA 352.41

Audio:     Card-1 Intel NM10/ICH7 Family High Definition Audio Controller

           driver: snd_hda_intel

           Card-2 NVIDIA GF119 HDMI Audio Controller driver: snd_hda_intel

           Card-3 Pixart Imaging driver: USB Audio

           Sound: Advanced Linux Sound Architecture v: k4.1.7

Network:   Card: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller

           driver: r8169

           IF: eth0 state: up speed: 100 Mbps duplex: full

           mac: KK:KK:KK:KK:KK:KK :D

Drives:    HDD Total Size: 1000.2GB (17.8% used)

           ID-1: /dev/sda model: ST500DM002 size: 500.1GB

           ID-2: /dev/sdb model: ST500DM002 size: 500.1GB

Partition: ID-1: / size: 457G used: 84G (20%) fs: ext4 dev: /dev/sda2

           ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda1

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 42.0C mobo: 30.0C gpu: 38C

           Fan Speeds (in rpm): cpu: 2045 sys-1: 1548

Info:      Processes: 158 Uptime: 3:18 Memory: 2592.5/7975.7MB

           Client: Shell (bash) inxi: 2.2.28 

 

Meu notebook:

System:    Host: ruan-laptop.blacksun Kernel: 4.1.7 x86_64 (64 bit)

           Desktop: KDE Plasma 4.14.6 Distro: Slackware 14.1

Machine:   System: Dell (portable) product: Inspiron 5458 v: 01

           Mobo: Dell model: 0VNM2T v: A00 Bios: Dell v: A03 date: 07/14/2015

CPU:       Dual core Intel Core i3-4005U (-HT-MCP-) cache: 3072 KB 

           clock speeds: max: 1700 MHz 1: 1699 MHz 2: 1700 MHz 3: 1700 MHz

           4: 1700 MHz

Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller

           Display Server: X.Org 1.14.3 drivers: intel (unloaded: vesa)

           Resolution: 1366x768@60.0hz

           GLX Renderer: Mesa DRI Intel Haswell Mobile

           GLX Version: 3.0 Mesa 9.1.7

Audio:     Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel

           Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel

           Sound: Advanced Linux Sound Architecture v: k4.1.7

Network:   Card-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter

           driver: ath9k

           Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller

           driver: r8169

           Card-3: Atheros

Drives:    HDD Total Size: 500.1GB (8.0% used)

           ID-1: /dev/sda model: WDC_WD5000LPVX size: 500.1GB

Partition: ID-1: / size: 456G used: 36G (9%) fs: ext4 dev: /dev/sda3

           ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 47.0C mobo: N/A

           Fan Speeds (in rpm): cpu: N/A

Info:      Processes: 177 Uptime: 10 min Memory: 1265.3/3867.3MB

           Client: Shell (bash) inxi: 2.2.28 

 

nandosilva
(usa Lubuntu)

Enviado em 03/10/2015 - 15:28h

System: Host: mesa.example.net Kernel: 3.10.17-smp i686 (32 bit) Desktop: Xfce 4.10.2 Distro: Slackware 14.1
Machine: Mobo: ASRock model: G31M-VS2 Bios: American Megatrends v: P1.00 date: 02/23/2010
CPU: Dual core Intel Core2 Duo E4600 (-MCP-) cache: 2048 KB
clock speeds: max: 2410 MHz 1: 2410 MHz 2: 2410 MHz
Graphics: Card: NVIDIA GF119 [GeForce GT 520]
Display Server: X.Org 1.14.3 driver: nvidia Resolution: 1280x1024@60.0hz
GLX Renderer: GeForce GT 520/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 346.35
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA GF119 HDMI Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.10.17-smp
Network: Card: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex:
Drives: HDD Total Size: 1000.2GB (22.9% used) ID-1: /dev/sda model: SAMSUNG_HD103SI size: 1000.2GB
Partition: ID-1: / size: 132G used: 14G (11%) fs: ext4 dev: /dev/sda6
ID-2: swap-1 size: 0.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 37.5C mobo: 29.0C gpu: 38C
Fan Speeds (in rpm): cpu: 1939 fan-1: 0 fan-3: 0 fan-4: 0 fan-5: 0
Info: Processes: 142 Uptime: 9 min Memory: 909.5/3031.3MB Client: Shell (bash) inxi: 2.2.28


Como ver em Display Server, ainda uso um monitor 4:3 de 17" de tela.

Buckminster
(usa Debian)

Enviado em 03/10/2015 - 15:38h

Segue:

root@Seibei:/home/seibei# inxi -F
System: Host: Seibei Kernel: 4.2.0 x86_64 (64 bit) Desktop: Xfce 4.10.2
Distro: Debian GNU/Linux 8
Machine: System: Dell product: Vostro 3550 serial: XXXXXX
Mobo: Dell model: 0XYW0C v: A12 serial: .XXXXXX.BR108191CD008Q.
Bios: Dell v: A12 date: 02/18/2014
CPU: Dual core Intel Core i5-2430M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3000 MHz 1: 898 MHz 2: 845 MHz 3: 900 MHz
4: 966 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
tty size: 80x24 Advanced Data: N/A for root
Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.2.0
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full
mac:
Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k
IF: wlan0 state: down mac:
Drives: HDD Total Size: 500.1GB (4.1% used)
ID-1: /dev/sda model: ST9500423AS size: 500.1GB
Partition: ID-1: / size: 19G used: 2.5G (15%) fs: btrfs dev: /dev/sda6
ID-2: /usr size: 28G used: 14G (50%) fs: btrfs dev: /dev/sda7
ID-3: /var size: 14G used: 1.3G (11%) fs: btrfs dev: /dev/sda10
ID-4: /boot size: 464M used: 186M (43%) fs: ext4 dev: /dev/sda5
ID-5: /home size: 15G used: 262M (3%) fs: btrfs dev: /dev/sda11
ID-6: /tmp size: 2.8G used: 17M (1%) fs: btrfs dev: /dev/sda9
ID-7: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda8
Sensors: System Temperatures: cpu: 41.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 287 Uptime: 5 min Memory: 451.0/7894.6MB
Client: Shell (bash) inxi: 2.2.28


QUE LEGAL, VÁRIOS ENDEREÇOS MAC PARA CLONAR DOS COMENTÁRIOS AÍ EM CIMA E FAZER ARTE NA INTERNET.

No Debian deve se instalar o pacote gawk para o inxi funcionar.

edps
(usa Slackware)

Enviado em 03/10/2015 - 15:48h

Obrigado pela participação de todos.

Vale lembrar que o inxi está disponível para muitas distribuições:

* para o caso dos Slackers está disponível no SlackBuilds;
* pros Debian-users (jessie, stretch e sid), Ubunters (trusty, utopic, vivid e wily), Arch-users e Gentoo via repositórios.
* pro Fedora via RPMFind.
* pro openSUSE via 1 Click Install * (só de escrever isso já dá arrepios!)

Aqui pus a instalação genérica.

Uma dica praqueles que quiserem humilhar os demais com sus máquinas potentes (não é o meu caso infelizmente! rsrs), demonstre também as flags de seu processador assim:

$ inxi -fF 

* tenho verginha de apresentar as minhas, então pulo essa! rsrs

E se quiserem verificar se falta algo aí, como o caso do lm_sensors, etc:

$ inxi --recommends 

Assim ficou show:

$ inxi -c 12 -fF 

* letras vermelha e com as flags do processador

edps
(usa Slackware)

Enviado em 03/10/2015 - 15:54h

Boa sacada, não tinha percebido isto!

Já editei o meu, sugiro os demais que façam o mesmo e vou por essa observação lá no post inicial.

removido
(usa Nenhuma)

Enviado em 03/10/2015 - 15:55h

Não percebi o "mac" ali, realmente, espero que aquela galerinha que usa Kali Linux não tenha visto, rsrsrs!

Buckminster
(usa Debian)

Enviado em 03/10/2015 - 15:56h

Segue:

root@Seibei:/home/seibei# inxi -c 12 -fF
System: Host: Seibei Kernel: 4.2.0 x86_64 (64 bit) Desktop: Xfce 4.10.2
Distro: Debian GNU/Linux 8
Machine: System: Dell product: Vostro 3550 serial: XXXXXX
Mobo: Dell model: 0XYW0C v: A12 serial: .XXXXXX.BR108191CD008Q.
Bios: Dell v: A12 date: 02/18/2014
CPU: Dual core Intel Core i5-2430M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3000 MHz 1: 2008 MHz 2: 1215 MHz 3: 804 MHz
4: 803 MHz
CPU Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts
clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts
eagerfpu epb ept est flexpriority fpu fxsr ht ida lahf_lm lm mca
mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pts rdtscp
rep_good sep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2
tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid x2apic xsave
xsaveopt xtopology xtpr
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
tty size: 80x24 Advanced Data: N/A for root
Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.2.0
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full
mac:
Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k
IF: wlan0 state: down mac:
Drives: HDD Total Size: 500.1GB (4.1% used)
ID-1: /dev/sda model: ST9500423AS size: 500.1GB
Partition: ID-1: / size: 19G used: 2.5G (15%) fs: btrfs dev: /dev/sda6
ID-2: /usr size: 28G used: 14G (50%) fs: btrfs dev: /dev/sda7
ID-3: /var size: 14G used: 1.3G (11%) fs: btrfs dev: /dev/sda10
ID-4: /boot size: 464M used: 186M (43%) fs: ext4 dev: /dev/sda5
ID-5: /home size: 15G used: 263M (3%) fs: btrfs dev: /dev/sda11
ID-6: /tmp size: 2.8G used: 17M (1%) fs: btrfs dev: /dev/sda9
ID-7: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda8
Sensors: System Temperatures: cpu: 44.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 272 Uptime: 23 min Memory: 263.0/7894.6MB
Client: Shell (bash) inxi: 2.2.28

removido
(usa Nenhuma)

Enviado em 03/10/2015 - 15:59h

System:    Host: xubuntu Kernel: 3.2.0-88-generic i686 (32 bit)

           Desktop: Xfce 4.8.3 Distro: Ubuntu 12.04 precise

Machine:   Mobo: PCCHIPS model: A33G v: 1.0

           Bios: American Megatrends v: 080013 date: 07/07/2006

CPU:       Single core AMD Sempron 3000+ (-UP-) cache: 256 KB

           speed: 1600 MHz (max)

Graphics:  Card: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter

           Display Server: X.Org 1.11.3 drivers: sis (unloaded: fbdev,vesa)

           Resolution: 1024x768@85.0hz

           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x300)

           GLX Version: 2.1 Mesa 8.0.4

Audio:     Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller

           driver: snd_intel8x0

           Sound: Advanced Linux Sound Architecture v: 1.0.24

Network:   Card: Silicon Integrated Systems [SiS] 190 Ethernet Adapter

           driver: sis190

           IF: eth0 state: up speed: 100 Mbps duplex: full

           mac: 

Drives:    HDD Total Size: 80.0GB (36.9% used)

           ID-1: /dev/sda model: SAMSUNG_SP0842N size: 80.0GB

Partition: ID-1: / size: 58G used: 24G (42%) fs: ext4 dev: /dev/sda1

           ID-2: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda2

           ID-3: swap-2 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/zram0

RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present

Sensors:   System Temperatures: cpu: 53.0C mobo: 52.0C

           Fan Speeds (in rpm): cpu: 3708 fan-2: 0 fan-3: 0

Info:      Processes: 133 Uptime: 20 min Memory: 676.9/1950.0MB

           Client: Shell (bash) inxi: 2.2.28  

A liberdade indocil e domada pela propria desgraça -William Shakespeare

removido
(usa Nenhuma)

Enviado em 03/10/2015 - 16:05h

Melhor usar inxi -F | sed '/mac:/d' para deletar a linha mac, o pessoal vai colando e esquece de editar. rs