Enviado em 29/06/2010 - 16:18h
Usa o pppoe pra configurar seu speedy.
Usa o comando:
Vai aparecer as informações abaixo:
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
Looks good! Now, please enter some information:
>>> Enter your PPPoE user name (default [email protected]
): "Digita seu usario sem aspas"
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth1): "Digita Enter pra deixar no padrão"
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):"Digita Enter pra deixar no padrão"
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: 126.96.36.199
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
>>> Enter the secondary DNS server address here: 188.8.131.52
>>> Please enter your PPPoE password:"Digita sua senha sem aspas"
>>> Please re-enter your PPPoE password: "Repita sua senha"
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2): "Digita 0 para ficar sem firewall"
Apos isso vai aparecer a mensagem abaixo se estiver tudo corrento digite y para aceitar.
** Summary of what you entered **
Ethernet Interface: eth1
User name: [email protected]
Primary DNS: 184.108.40.206
Secondary DNS: 220.127.116.11
>>> Accept these settings and adjust configuration files (y/n)?
Agora é so usar :
Espero que esteje certo essa configuração não tenho speedy aqui pra testar.
Se estiver algo errado agradeço se corrigirem !