Linux mint nao reconhece drivers [RESOLVIDO]

Eduamaro
(usa Linux Mint)

Enviado em 11/03/2017 - 13:36h

Ola, pela necesidade de usar o meu netbook para estudos, instalei o linux mint mate nele. Apos o reboot da instalacao eu fui verificar os drivers e percebi que estava escrito:
"desconhecido
Este dispositivo nao esta funcionando
( )Intel microcode
versao 3.2015106.1
processor microcode firmware for intel cpus
(x)Nao usar este dispositivo"
Isto tinha me acontecido quando intalei uma versao do ubuntu num pc com uma vga amd que nao era reconhecida pelo linux, tive que instalar uma versao mais antiga da distro. O meu processador 'e um intel atom e a placa de video 'e uma intel gma 3150. Como eu instalo os drivers corretos para estes dispositivos? O sistema esta lento, acredito que seja causado por estes drivers problematicos.
Obs: estou escrevendo de um teclado us, entao nao h'a acentuacao.

removido
(usa Nenhuma)

Enviado em 11/03/2017 - 19:15h

Qual a saída dos comandos?


lspci


lspci -v


dmesg | grep firmware

dmesg | grep failed

dmesg | grep error



Acho que o problema ai é falta do pacote intel-microcode no seu sistema.

https://www.vivaolinux.com.br/artigo/Microcode-Como-atualizar-o-firmware-do-processador?pagina=1

clodoaldops
(usa Linux Mint)

Enviado em 11/03/2017 - 20:17h

Poste saída comando lspci

**********************************************
Meu Blog
http://dicaslinuxmint.blogspot.com.br/

removido
(usa Nenhuma)

Enviado em 13/03/2017 - 10:59h

A solução é partir para um sistema Linux voltado para computadores antigos, mas antigos mesmo. Existem sistemas Linux que são leves mas para computadores modernos. Nesse, caso esqueça os sistemas da família Ubuntu e seus sabores, bem como as refisefuquis do Ubuntu.

O ideal é usar o Slackware, mas há também o LegacyOS (baseado no Puppy Linux).

Se insistir na família Ubuntu, opte pelo Ubuntu 14.04 LTS ou um de seus sabores, que tem suporte por mais dois anos.

Eduamaro
(usa Linux Mint)

Enviado em 13/03/2017 - 17:50h

Lspci:
" 00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 05)
"
lspci -v:
" 00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at 56180000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 40c0 [size=8]
Memory at 40000000 (32-bit, prefetchable) [size=256M]
Memory at 56000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0
Memory at 56100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company NM10/ICH7 Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at 56200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 55000000-55ffffff
Prefetchable memory behind bridge: 0000000050000000-0000000050ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 54000000-54ffffff
Prefetchable memory behind bridge: 0000000051000000-0000000051ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 53000000-53ffffff
Prefetchable memory behind bridge: 0000000052000000-0000000052ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 4020 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at 56204400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Hewlett-Packard Company NM10 Family LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company NM10/ICH7 Family SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
I/O ports at 40b8 [size=8]
I/O ports at 40cc [size=4]
I/O ports at 40b0 [size=8]
I/O ports at 40c8 [size=4]
I/O ports at 40a0 [size=16]
Memory at 56204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
Subsystem: Hewlett-Packard Company NM10/ICH7 Family SMBus Controller
Flags: medium devsel, IRQ 10
I/O ports at 4000 [size=32]
Kernel modules: i2c_i801
"
dmesg | grep firmware nao faz nada
dmesg | grep failed:
"
[ 0.305374] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[ 2.012041] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001"

dmesg | grep error:

"[ 14.849141] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro"

Eduamaro
(usa Linux Mint)

Enviado em 13/03/2017 - 17:52h

Aqui ubuntu nem rola, por causa da unity. Sobre o slackware, nao tenho tempo para ficar compilando tudo, ainda mais com o meu processador, puppy linux nao 'e compativel com os softwares que terei que usar na faculdade

Eduamaro
(usa Linux Mint)

Enviado em 13/03/2017 - 18:00h

Entao, eu fui na aba drivers, e mandei ele instalar o intel microcode, mas ele ainda diz ser um dispositivo desconhecido, e dando os comandos deste tutorial ele retorna dizendo que estou com o microcode3 intalado aqui, e tentando intalar ele, o sistema diz que nao ha nenhum aplicativo para instalar ou atualizar. Porem continuo achando que estou usando um driver generico para a minha gma 3150 e para o meu intel atom.

removido
(usa Nenhuma)

Enviado em 13/03/2017 - 18:16h

Qual a saída dos comandos?

sudo apt-cache search "microcode"

sudo dpkg -l | grep -i "microcode"

Ser a gma 3150 esta com driver genérico é melhor deixar assim vejo muito caso de problemas usado driver proprietário.

O intel microcode esta relacionado ao processador Intel e não a placa de video.

Eduamaro
(usa Linux Mint)

Enviado em 13/03/2017 - 18:22h

sudo apt-cache search "microcode":
"intel-microcode - Processor microcode firmware for Intel CPUs
iucode-tool - Intel processor microcode tool
mupen64plus-rsp-hle - high-level rsp emulation for mupen64plus
mupen64plus-rsp-z64 - low-level rsp emulation for mupen64plus
mupen64plus-video-arachnoid - Arachnoid high-level graphics emulation for mupen64plus
mupen64plus-video-glide64 - Glide64 high-level graphics emulation for mupen64plus
mupen64plus-video-glide64mk2 - Glide64Mk2 high-level graphics emulation for mupen64plus
mupen64plus-video-rice - Rice's high-level graphics emulation for mupen64plus
mupen64plus-video-z64 - low-level rdp emulation for mupen64plus
simh - Emulators for 33 different computers
tkgate - Tcl/Tk based digital circuit editor and simulator
amd64-microcode - Processor microcode firmware for AMD CPUs
microcode.ctl - Intel IA32/IA64 CPU Microcode Utility (transitional package)"

sudo dpkg -l | grep -i "microcode":
"ii intel-microcode 3.20151106.1 i386 Processor microcode firmware for Intel CPUs
ii iucode-tool 1.5.1-1ubuntu0.1 i386 Intel processor microcode tool
"

clodoaldops
(usa Linux Mint)

Enviado em 13/03/2017 - 19:34h

Intel Atom D
Eu tentaria linuxmint-17-mate ou lmde-2-mate

**********************************************
Meu Blog
http://dicaslinuxmint.blogspot.com.br/

removido
(usa Nenhuma)

Enviado em 13/03/2017 - 20:35h

Antes de instalar qualquer distro verifica os Pré-requisitos de instalação


Qual a interface gráfica que você esta usando? Mate ou Cinnamon

O sistema esta lento deve ser a interface gráfica do Linux Mint muda para xfce ou lxde.

https://www.linuxmint.com/download.php

https://www.linuxmint.com/download_all.php




Sobre o driver Intel 3150

http://www.intel.com.br/content/www/br/pt/support/graphics-drivers/000005520.html



O pacote Intel microcode versão 3.2015106.1 já esta instalado.

sudo dpkg -l | grep -i "microcode":
"ii intel-microcode 3.20151106.1 i386 Processor microcode firmware for Intel CPUs

Qual o fabricante e modelo do netbook?

Qual a saída do comando?

cat /proc/cpuinfo

removido
(usa Nenhuma)

Enviado em 15/03/2017 - 08:59h

Teste o Lubuntu 14.04.

Como assim Puppy Linux não é compatível com os softwares que você vai usar na faculdade?
Se o software está disponível para Linux, sempre há uma maneira de instalar no Puppy Linux.

Aliás, talvez esse computador não seja a melhor opção para "softwares que terá que usar na faculdade", visto que não roda nada além do básico mesmo.