fschunig
(usa Debian)
Enviado em 03/09/2010 - 10:17h
Bom dia
korvoman, primeiramente agradeço sua ajuda.
Rodei o mii-tool e parece estar ok. Retorno do comando:
==================
eth0: negotiated 100baseTx-FD flow-control, link ok
==================
O comando dmesg retornou bastante coisa.
Analisei o que pude entender, mas não entendi muita coisa =D
Retorno:
==================
Linux version 2.6.33.4-smp (root@midas) (gcc version 4.4.4 (GCC) ) #2 SMP Wed May 12 22:47:36 CDT 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003dff0000 (usable)
BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS)
BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3dff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03E000000 mask FFE000000 uncachable
2 base 0E0000000 mask FFC000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 02000000
found SMP MP-table at [c00f5550] f5550
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 15000-1b000
ACPI: RSDP 000f7010 00014 (v00 KM400A)
ACPI: RSDT 3dff3040 0002C (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3dff30c0 00074 (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3dff3180 044FF (v01 KM400A AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3dff0000 00040
ACPI: APIC 3dff76c0 0005A (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
107MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00017000 - 0001de80
(13 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001df1f64] TEXT DATA BSS ==> [0001000000 - 0001df1f64]
#3 [0001df2000 - 0001dfa115] BRK ==> [0001df2000 - 0001dfa115]
#4 [00000f5560 - 0000100000] BIOS reserved ==> [00000f5560 - 0000100000]
#5 [00000f5550 - 00000f5560] MP-table mpf ==> [00000f5550 - 00000f5560]
#6 [000009fc00 - 00000f0c00] BIOS reserved ==> [000009fc00 - 00000f0c00]
#7 [00000f0d18 - 00000f5550] BIOS reserved ==> [00000f0d18 - 00000f5550]
#8 [00000f0c00 - 00000f0d18] MP-table mpc ==> [00000f0c00 - 00000f0d18]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000]
#12 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003dff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003dff0
On node 0 totalpages: 253823
free_area_init_node: node 0, pgdat c1c4d140, node_mem_map c1dfc200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 216 pages used for memmap
HighMem zone: 27418 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3e000000 (gap: 3e000000:c0c00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34648 r0 d22696 u4194304
pcpu-alloc: s34648 r0 d22696 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251839
Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0003dff0)
Memory: 991688k/1015744k available (9560k kernel code, 23152k reserved, 3111k data, 636k init, 110536k highmem)
virtual kernel memory layout:
fixmap : 0xffd57000 - 0xfffff000 (2720 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc1c61000 - 0xc1d00000 ( 636 kB)
.data : 0xc19561c0 - 0xc1c60004 (3111 kB)
.text : 0xc1000000 - 0xc19561c0 (9560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1660.144 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3320.28 BogoMIPS (lpj=1660144)
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 4 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 29k freed
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 33446 entries in 66 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) 2400+ stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3320.28 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 2224.000 MB/sec
xor: using function: pIII_sse (2224.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb9f0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xfffe] invalid; aligning end to 4-byte boundary
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x3e000000-0xfebfffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:01.0: supports D1
pci 0000:00:08.0: reg 10: [mem 0xea000000-0xea000fff]
pci 0000:00:08.0: reg 14: [io 0xd000-0xd0ff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 10: [mem 0xea001000-0xea0010ff]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: [io 0x0400-0x047f] claimed by vt8235 PM
pci 0000:00:11.0: quirk: [io 0x5000-0x500f] claimed by vt8235 SMB
pci 0000:00:11.1: reg 20: [io 0xe000-0xe00f]
pci 0000:00:11.5: reg 10: [io 0xe400-0xe4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10: [io 0xec00-0xecff]
pci 0000:00:12.0: reg 14: [mem 0xea002000-0xea0020ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xe8ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 687 MB/s
raid6: int32x2 664 MB/s
raid6: int32x4 484 MB/s
raid6: int32x8 429 MB/s
raid6: mmxx1 1347 MB/s
raid6: mmxx2 2207 MB/s
raid6: sse1x1 1257 MB/s
raid6: sse1x2 2011 MB/s
raid6: using algorithm sse1x2 (2011 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x3dff0000-0x3dffffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x3dfeffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x5000-0x500f] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0294-0x0297] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xe9000000-0xe900ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
pci_bus 0000:01: resource 2 [mem 0xe4000000-0xe7ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 32
audit: initializing netlink socket (disabled)
type=2000 audit(1282844759.323:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 12 2010 22:42:00) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 7751, nTxLock = 62010
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built May 12 2010 22:42:42) installed
msgmni has been set to 1721
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
0000:00:08.0: ttyS2 at I/O 0xd028 (irq = 16) is a 8250
0000:00:08.0: ttyS3 at I/O 0xd040 (irq = 16) is a 8250
Couldn't register serial port 0000:00:08.0: -28
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.01-k10
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.7
Copyright(c) 2004-2009 Emulex. All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
mpt2sas version 03.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20081215, fixed bufsize 32768, s/g segs 256
pata_via 0000:00:11.1: version 0.3.4
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.13
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xea001000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:10.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1.00: ATA-6: ST340014A, 8.01, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST340014A 8.01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: HL-DT-ST GCE-8526B, 1.04, max UDMA/33
ata2.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8526B 1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
registered taskstats version 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 636k freed
Write protecting the kernel text: 9564k
Write protecting the kernel read-only data: 2448k
udev: starting version 153
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 932kHz
agpgart: Detected VIA KM400/KM400A chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (42 C)
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xea002000, 00:11:d8:83:06:4f, IRQ 23.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 4de1.
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ACPI: Fan [FAN] (on)
ppdev: user-space parallel port driver
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Console: switching to colour frame buffer device 80x30
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
Adding 2947916k swap on /dev/sda2. Priority:-1 extents:1 across:2947916k
fuse init (API version 7.13)
lp0: using parport0 (interrupt-driven).
lp0: console ready
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
process `talk' is using obsolete setsockopt SO_BSDCOMPAT
smbclient[5520]: segfault at c35dec79 ip b76e2fa8 sp bf84d550 error 5 in smbclient[b721c000+60b000]
smbclient[5521]: segfault at c35dec79 ip b75d1fa8 sp bf99a9c0 error 5 in smbclient[b710b000+60b000]
smbclient[5522]: segfault at c35dec79 ip b7692fa8 sp bfe82b90 error 5 in smbclient[b71cc000+60b000]
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
eth0: no IPv6 routers present
==================
Pelo que pude entender, a conexão eth0 está ok, certo?
o "top" também parece estar ok. Existem 2 processos "smbd" que se destacam, consumindo CPU e RAM a mais que os outros.
Agradeço qualquer dica ;)
Abraços
Fabio Schunig
