Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

1. Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

singleMan
singleMan

(usa Debian)

Enviado em 17/07/2017 - 02:47h

Olá pessoas, estou com o seguinte problema, quando tento copiar algo para um pendriver ou HD externo do meu computador o processo meio que "trava no 100%", como nesta imagem, http://imgur.com/a/Lwc64 se eu esperar normalmente (99% das vezes), o arquivo é copiado com sucesso para o pendriver, porém, quando eu mexo com uma grande leva de arquivos (10GB++), fico perdido sem saber quanto tempo vai demorar, é meio agoniante rsrs, alguem poderia me ajudar com isto? obrigado.


  


2. MELHOR RESPOSTA

Mateus Gabriel Müller
mateusgabriel

(usa Debian)

Enviado em 17/07/2017 - 10:19h

Este problema ocorre somente com este pendrive?
Se não, os outros também estao no mesmo formato? VFAT/NTFS?
Em outra distribuição da o mesmo problema?
Cola o dmesg pra nós aqui.

Att,
Mateus Gabriel

3. Re: Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

listeiro_037
listeiro_037

(usa Nenhuma)

Enviado em 17/07/2017 - 02:52h

Sem descaso:

Estou acostumado demais com terminal. Principalmente com pendrive e arquivos muito grandes. Na dúvida eu dou kill no comando cp e já era.


4. Re: Pendrive

singleMan
singleMan

(usa Debian)

Enviado em 17/07/2017 - 14:15h

Este problema ocorre somente com este pendrive?

Não, ja aconteceu com outros pendriver/HDs externos também.

Se não, os outros também estao no mesmo formato? VFAT/NTFS?

Agora que você citou, lembro que estes problemas somente ocorreram em dispositivos com partições NTFS/FAT, vou testar em dispositivos com o format ext depois

Em outra distribuição da o mesmo problema?

Ja aconteceu no ubuntu, no ano passado, tenho o o fedora e o Slackware instalado aqui, vou testar neles mais tarde.

Cola o dmesg pra nós aqui.


Dei o comando quando estava copiano um arquivo e de uma olhada na ultima linha

[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=d4469b13-f8ba-47a5-b4ee-4e89dddf53a8 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cc24efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc24f000-0x00000000cc88afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000cc89afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc89b000-0x00000000cc9bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc9c0000-0x00000000cd829fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd82a000-0x00000000cd82afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd82b000-0x00000000cd86dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd86e000-0x00000000cdc9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdca0000-0x00000000cdff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H61-M LX3 R2.0, BIOS 1107 02/25/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff95dd000fd770]
[ 0.000000] Base memory trampoline at [ffff95dd00097000] 97000 size 24576
[ 0.000000] BRK [0x19872e000, 0x19872efff] PGTABLE
[ 0.000000] BRK [0x19872f000, 0x19872ffff] PGTABLE
[ 0.000000] BRK [0x198730000, 0x198730fff] PGTABLE
[ 0.000000] BRK [0x198731000, 0x198731fff] PGTABLE
[ 0.000000] BRK [0x198732000, 0x198732fff] PGTABLE
[ 0.000000] BRK [0x198733000, 0x198733fff] PGTABLE
[ 0.000000] BRK [0x198734000, 0x198734fff] PGTABLE
[ 0.000000] BRK [0x198735000, 0x198735fff] PGTABLE
[ 0.000000] BRK [0x198736000, 0x198736fff] PGTABLE
[ 0.000000] BRK [0x198737000, 0x198737fff] PGTABLE
[ 0.000000] BRK [0x198738000, 0x198738fff] PGTABLE
[ 0.000000] BRK [0x198739000, 0x198739fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ac5000-0x36d59fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC88F078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC899150 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC88F180 009FCD (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CC9BE080 000040
[ 0.000000] ACPI: APIC 0x00000000CC899260 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC8992F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CC899340 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC899380 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC8993B8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CC89ABC8 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CC899780 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC89A130 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdee000-0x41fdf2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cc24efff]
[ 0.000000] node 0: [mem 0x00000000cd82a000-0x00000000cd82afff]
[ 0.000000] node 0: [mem 0x00000000cd86e000-0x00000000cdc9ffff]
[ 0.000000] node 0: [mem 0x00000000cdff4000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112937
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13011 pages used for memmap
[ 0.000000] DMA32 zone: 832653 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cf200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc24f000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xcc89afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc89b000-0xcc9bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc9c0000-0xcd829fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd82b000-0xcd86dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdca0000-0xcdff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff95e11fa00000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048649
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=d4469b13-f8ba-47a5-b4ee-4e89dddf53a8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16091784K/16451748K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 359964K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3400.157 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.31 BogoMIPS (lpj=13600628)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20160831
[ 0.004143] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.004178] Security Framework initialized
[ 0.004179] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004183] AppArmor: AppArmor disabled by boot time parameter
[ 0.004748] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007582] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008861] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008870] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009113] CPU: Physical Processor ID: 0
[ 0.009113] CPU: Processor Core ID: 0
[ 0.009116] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009116] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009119] mce: CPU supports 9 MCE banks
[ 0.009125] CPU0: Thermal monitoring enabled (TM1)
[ 0.009135] process: using mwait in idle threads
[ 0.009137] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009137] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009425] Freeing SMP alternatives memory: 24K (ffffffffa0a7a000 - ffffffffa0a80000)
[ 0.010916] ftrace: allocating 25178 entries in 99 pages
[ 0.018986] smpboot: Max logical packages: 2
[ 0.018989] DMAR: Host address width 36
[ 0.018990] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.018996] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.018997] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.018999] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.019000] DMAR: RMRR base: 0x000000cc589000 end: 0x000000cc599fff
[ 0.019001] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[ 0.019002] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.019003] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.019003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.019217] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.019218] x2apic enabled
[ 0.019221] Switched APIC routing to cluster x2apic.
[ 0.019630] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059316] TSC deadline timer enabled
[ 0.059318] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.059320] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.059337] ... version: 3
[ 0.059337] ... bit width: 48
[ 0.059337] ... generic registers: 4
[ 0.059338] ... value mask: 0000ffffffffffff
[ 0.059338] ... max period: 00007fffffffffff
[ 0.059338] ... fixed-purpose events: 3
[ 0.059339] ... event mask: 000000070000000f
[ 0.059765] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.059840] x86: Booting SMP configuration:
[ 0.059841] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.621481] x86: Booted up 1 node, 8 CPUs
[ 0.621483] smpboot: Total of 8 processors activated (54409.76 BogoMIPS)
[ 0.627679] devtmpfs: initialized
[ 0.627726] x86/mm: Memory block size: 128MB
[ 0.630199] PM: Registering ACPI NVS region [mem 0xcc89b000-0xcc9bffff] (1200128 bytes)
[ 0.630222] PM: Registering ACPI NVS region [mem 0xcd82b000-0xcd86dfff] (274432 bytes)
[ 0.630268] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.630277] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.630314] pinctrl core: initialized pinctrl subsystem
[ 0.630393] NET: Registered protocol family 16
[ 0.643296] cpuidle: using governor ladder
[ 0.659303] cpuidle: using governor menu
[ 0.659337] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.659338] ACPI: bus type PCI registered
[ 0.659339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.659401] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.659402] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.659407] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.659457] PCI: Using configuration type 1 for base access
[ 0.659494] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.679425] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.679598] ACPI: Added _OSI(Module Device)
[ 0.679599] ACPI: Added _OSI(Processor Device)
[ 0.679599] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.679600] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.679743] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.682386] ACPI: Dynamic OEM Table Load:
[ 0.682391] ACPI: SSDT 0xFFFF95E10F4A8000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.682651] ACPI: Dynamic OEM Table Load:
[ 0.682655] ACPI: SSDT 0xFFFF95E10D7F9000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.682851] ACPI: Dynamic OEM Table Load:
[ 0.682854] ACPI: SSDT 0xFFFF95E10D043400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.683945] ACPI: Interpreter enabled
[ 0.683959] ACPI: (supports S0 S3 S4 S5)
[ 0.683960] ACPI: Using IOAPIC for interrupt routing
[ 0.683980] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.687819] ACPI: Power Resource [FN00] (off)
[ 0.687879] ACPI: Power Resource [FN01] (off)
[ 0.687938] ACPI: Power Resource [FN02] (off)
[ 0.687997] ACPI: Power Resource [FN03] (off)
[ 0.688055] ACPI: Power Resource [FN04] (off)
[ 0.688473] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.688476] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.688559] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.688633] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.688633] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.688937] PCI host bridge to bus 0000:00
[ 0.688939] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.688940] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.688940] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.688941] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.688942] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.688943] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.688943] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.688944] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.688945] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.688946] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.688947] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.688952] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.689020] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.689044] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.689078] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.689108] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.689114] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.689118] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.689120] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.689215] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.689233] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[ 0.689302] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.689368] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.689384] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
[ 0.689459] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.689504] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.689533] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.689547] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.689611] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.689651] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.689679] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.689747] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.689786] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.689817] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.689885] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.689924] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.689954] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.689969] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[ 0.690045] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.690089] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.690119] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.690268] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.690280] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.690286] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.690292] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.690298] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.690303] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.690309] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
[ 0.690344] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.690402] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.690414] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[ 0.690432] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.690523] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.690566] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.690632] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.690653] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.690685] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.690704] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.690815] pci 0000:03:00.0: supports D1 D2
[ 0.690816] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.690861] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.703335] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.703339] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.703348] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.703673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.703710] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.703745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.703780] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.703815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.703850] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.703885] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.703919] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.704098] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.704205] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.704206] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.704207] vgaarb: loaded
[ 0.704208] vgaarb: bridge control possible 0000:00:02.0
[ 0.704252] PCI: Using ACPI for IRQ routing
[ 0.705637] PCI: pci_cache_line_size set to 64 bytes
[ 0.705665] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.705666] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.705667] e820: reserve RAM buffer [mem 0xcc24f000-0xcfffffff]
[ 0.705668] e820: reserve RAM buffer [mem 0xcd82b000-0xcfffffff]
[ 0.705669] e820: reserve RAM buffer [mem 0xcdca0000-0xcfffffff]
[ 0.705669] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.705670] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.705774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.705777] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.707793] clocksource: Switched to clocksource hpet
[ 0.711995] VFS: Disk quotas dquot_6.6.0
[ 0.712014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.712066] pnp: PnP ACPI init
[ 0.712134] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.712136] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.712187] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.712188] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.712189] system 00:01: [io 0xffff] has been reserved
[ 0.712190] system 00:01: [io 0xffff] has been reserved
[ 0.712190] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.712191] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.712192] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.712193] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.712195] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712212] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.712246] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.712247] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.712304] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.712306] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712340] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.712342] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712387] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.712519] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.712520] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.712521] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.712522] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.712523] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.712524] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.712525] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.712526] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.712527] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.712528] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.712529] system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
[ 0.712530] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.712632] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.712633] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.712634] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.712648] pnp: PnP ACPI: found 9 devices
[ 0.718342] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.718361] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.718365] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.718374] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.718376] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.718381] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.718387] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.718387] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.718388] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.718389] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.718390] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.718390] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.718391] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.718392] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.718393] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.718393] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.718394] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.718395] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.718468] NET: Registered protocol family 2
[ 0.718605] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.718750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.718842] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.718859] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.718889] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.718946] NET: Registered protocol family 1
[ 0.718956] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.767895] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.767926] Unpacking initramfs...
[ 1.001746] Freeing initrd memory: 19028K (ffff95dd35ac5000 - ffff95dd36d5a000)
[ 1.001782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.001783] software IO TLB [mem 0xc824f000-0xcc24f000] (64MB) mapped at [ffff95ddc824f000-ffff95ddcc24efff]
[ 1.002077] audit: initializing netlink subsys (disabled)
[ 1.002088] audit: type=2000 audit(1500271576.000:1): initialized
[ 1.002369] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.002416] zbud: loaded
[ 1.002856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.002876] io scheduler noop registered
[ 1.002877] io scheduler deadline registered
[ 1.002885] io scheduler cfq registered (default)
[ 1.003239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.003243] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.003251] intel_idle: MWAIT substates: 0x1120
[ 1.003252] intel_idle: v0.4.1 model 0x3A
[ 1.003427] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.003562] GHES: HEST is not enabled!
[ 1.003595] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.003882] Linux agpgart interface v0.103
[ 1.003925] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.003925] AMD IOMMUv2 functionality not available on this system
[ 1.004339] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 1.004339] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.006824] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.006826] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.006904] mousedev: PS/2 mouse device common for all mice
[ 1.006932] rtc_cmos 00:02: RTC can wake from S4
[ 1.007038] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.007060] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.007066] intel_pstate: Intel P-state driver initializing
[ 1.007373] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.008239] NET: Registered protocol family 10
[ 1.008538] mip6: Mobile IPv6
[ 1.008540] NET: Registered protocol family 17
[ 1.008542] mpls_gso: MPLS GSO support
[ 1.008936] microcode: sig=0x306a9, pf=0x2, revision=0x17
[ 1.009115] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.009301] registered taskstats version 1
[ 1.009323] zswap: loaded using pool lzo/zbud
[ 1.009531] ima: No TPM chip found, activating TPM-bypass!
[ 1.009841] rtc_cmos 00:02: setting system clock to 2017-07-17 06:06:16 UTC (1500271576)
[ 1.009947] PM: Hibernation image not present or could not be loaded.
[ 1.011536] Freeing unused kernel memory: 1392K (ffffffffa091e000 - ffffffffa0a7a000)
[ 1.011537] Write protecting the kernel read-only data: 12288k
[ 1.012166] Freeing unused kernel memory: 1988K (ffff95de97e0f000 - ffff95de98000000)
[ 1.015745] Freeing unused kernel memory: 1240K (ffff95de982ca000 - ffff95de98400000)
[ 1.024846] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.105778] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.105878] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.105891] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.107011] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.107053] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.108477] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.108550] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.108917] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.108984] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.109058] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.141966] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.141968] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.142681] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.142682] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.144003] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.144012] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.144910] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffbd69c18cd000, 60:a4:4c:df:7d:d0, XID 08000800 IRQ 27
[ 1.144913] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.144999] ACPI: bus type USB registered
[ 1.145036] usbcore: registered new interface driver usbfs
[ 1.145053] usbcore: registered new interface driver hub
[ 1.145092] usbcore: registered new device driver usb
[ 1.145210] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.145918] SCSI subsystem initialized
[ 1.146123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.146403] ehci-pci: EHCI PCI platform driver
[ 1.146590] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.146599] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.146613] ehci-pci 0000:00:1a.0: debug port 2
[ 1.147583] libata version 3.00 loaded.
[ 1.149994] AVX version of gcm_enc/dec engaged.
[ 1.149995] AES CTR mode by8 optimization enabled
[ 1.150527] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.150560] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c08000
[ 1.163794] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.163923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.163925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.163926] usb usb1: Product: EHCI Host Controller
[ 1.163927] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.163928] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.164078] hub 1-0:1.0: USB hub found
[ 1.164091] hub 1-0:1.0: 2 ports detected
[ 1.164456] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.164464] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.164477] ehci-pci 0000:00:1d.0: debug port 2
[ 1.168338] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.168375] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.168383] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
[ 1.187820] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.187892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.187894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.187896] usb usb2: Product: EHCI Host Controller
[ 1.187897] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.187899] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.188092] hub 2-0:1.0: USB hub found
[ 1.188098] hub 2-0:1.0: 2 ports detected
[ 1.188279] ahci 0000:00:1f.2: version 3.0
[ 1.198591] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x22 impl SATA mode
[ 1.198594] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.208541] scsi host0: ahci
[ 1.208769] scsi host1: ahci
[ 1.208971] scsi host2: ahci
[ 1.209145] scsi host3: ahci
[ 1.209233] scsi host4: ahci
[ 1.209364] scsi host5: ahci
[ 1.209409] ata1: DUMMY
[ 1.209411] ata2: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06180 irq 28
[ 1.209412] ata3: DUMMY
[ 1.209413] ata4: DUMMY
[ 1.209413] ata5: DUMMY
[ 1.209414] ata6: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06380 irq 28
[ 1.491792] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.515797] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.522416] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.522437] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.522519] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[ 1.522682] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff95e10f4beeb0), AE_NOT_FOUND (20160831/psparse-543)
[ 1.522927] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[ 1.523085] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff95e10f4be3c0), AE_NOT_FOUND (20160831/psparse-543)
[ 1.523313] ata2.00: ATA-9: KINGSTON SUV300S37A120G, SAFM11.K, max UDMA/133
[ 1.523315] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.523479] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[ 1.523641] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff95e10f4beeb0), AE_NOT_FOUND (20160831/psparse-543)
[ 1.523903] ata2.00: configured for UDMA/133
[ 1.523977] ata6.00: ATA-8: ST1000VM002-1CT162, SC23, max UDMA/133
[ 1.523980] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.524316] scsi 1:0:0:0: Direct-Access ATA KINGSTON SUV300S 11.K PQ: 0 ANSI: 5
[ 1.524511] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[ 1.524670] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff95e10f4be3c0), AE_NOT_FOUND (20160831/psparse-543)
[ 1.525189] ata6.00: configured for UDMA/133
[ 1.564310] scsi 5:0:0:0: Direct-Access ATA ST1000VM002-1CT1 SC23 PQ: 0 ANSI: 5
[ 1.606912] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.606946] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.606949] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1.607004] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.607007] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.607031] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.607069] sd 1:0:0:0: [sda] Write Protect is off
[ 1.607072] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.607109] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.607730] sda: sda1 sda2 sda3 sda4
[ 1.608791] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.622322] sdb: sdb1 < sdb5 > sdb2 sdb3
[ 1.622887] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.644101] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.644103] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.644365] hub 1-1:1.0: USB hub found
[ 1.644553] hub 1-1:1.0: 4 ports detected
[ 1.664267] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.664269] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.665081] hub 2-1:1.0: USB hub found
[ 1.665388] hub 2-1:1.0: 6 ports detected
[ 1.678112] random: fast init done
[ 1.855933] device-mapper: uevent: version 1.0.3
[ 1.856013] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.939778] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.955774] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.011777] tsc: Refined TSC clocksource calibration: 3400.023 MHz
[ 2.011785] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns
[ 2.050497] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364
[ 2.050499] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.050501] usb 1-1.3: Product: Mass Storage Device
[ 2.050502] usb 1-1.3: Manufacturer: Generic
[ 2.050513] usb 1-1.3: SerialNumber: 058F63646476
[ 2.053226] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.053347] scsi host6: usb-storage 1-1.3:1.0
[ 2.053512] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.053530] usbcore: registered new interface driver usb-storage
[ 2.055129] usbcore: registered new interface driver uas
[ 2.055134] usbcore: registered new interface driver usbhid
[ 2.055137] usbhid: USB HID core driver
[ 2.056055] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1
[ 2.067697] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.067700] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.067701] usb 2-1.3: Product: USB Receiver
[ 2.067703] usb 2-1.3: Manufacturer: Logitech
[ 2.075529] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2
[ 2.078002] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.202914] input: Logitech M310 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0004/0003:046D:1024.0005/input/input3
[ 2.203037] logitech-hidpp-device 0003:046D:1024.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M310] on usb-0000:00:1d.0-1.3:1
[ 2.204998] input: Logitech K520 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input4
[ 2.205173] logitech-hidpp-device 0003:046D:2011.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:1d.0-1.3:2
[ 3.035903] clocksource: Switched to clocksource tsc
[ 3.068726] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.069469] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.070179] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.070983] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.104307] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.105060] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.105704] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.106421] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 5.286726] random: crng init done
[ 10.433148] NET: Registered protocol family 38
[ 10.758896] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.907223] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.915695] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 10.915876] systemd[1]: Detected architecture x86-64.
[ 10.916220] systemd[1]: Set hostname to <Dki716GB>.
[ 10.990222] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.990261] systemd[1]: Reached target Remote File Systems.
[ 10.990297] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.990326] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.990348] systemd[1]: Listening on udev Kernel Socket.
[ 10.990360] systemd[1]: Reached target Swap.
[ 10.990474] systemd[1]: Created slice User and Session Slice.
[ 11.009615] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 11.028275] systemd-journald[340]: Received request to flush runtime journal from PID 1
[ 11.084752] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 11.084755] ACPI: Power Button [PWRB]
[ 11.084794] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 11.084796] ACPI: Power Button [PWRF]
[ 11.091909] EDAC MC: Ver: 3.0.0
[ 11.092336] wmi: Mapper loaded
[ 11.094403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.094629] EDAC ie31200: No ECC support
[ 11.099334] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 11.099338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.099340] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 11.099342] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 11.099343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.099344] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 11.099345] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 11.099347] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.099347] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 11.099349] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160831/utaddress-247)
[ 11.099350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.099351] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.100370] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.102390] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 11.102432] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 11.102473] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.102508] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 11.102536] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 11.102564] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 11.151480] [drm] Initialized
[ 11.166540] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 11.170257] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.183747] iTCO_vendor_support: vendor-support=0
[ 11.184831] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.184865] iTCO_wdt: Found a [*****] Point TCO device (Version=2, TCOBASE=0x0460)
[ 11.185989] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.187226] asus_wmi: ASUS WMI generic driver loaded
[ 11.187391] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 11.187392] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 11.187393] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.187393] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 11.187965] asus_wmi: Initialization: 0x0
[ 11.187990] asus_wmi: BIOS WMI version: 0.9
[ 11.188030] asus_wmi: SFUN value: 0x0
[ 11.188348] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 11.188423] asus_wmi: Number of fans: 1
[ 11.229707] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 11.229708] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.229709] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 11.229709] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 11.229710] snd_hda_codec_via hdaudioC0D0: inputs:
[ 11.229711] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 11.229712] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 11.229713] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 11.232659] [drm] Memory usable by graphics device = 2048M
[ 11.232661] [drm] Replacing VGA console driver
[ 11.233194] Console: switching to colour dummy device 80x25
[ 11.236100] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.236161] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.236220] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.236515] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.236586] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.239420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.239421] [drm] Driver supports precise vblank timestamp query.
[ 11.241609] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.242415] intel_rapl: Found RAPL domain package
[ 11.242417] intel_rapl: Found RAPL domain core
[ 11.242418] intel_rapl: Found RAPL domain uncore
[ 11.242423] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 11.244517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.244584] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 11.244637] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.267222] fbcon: inteldrmfb (fb0) is primary device
[ 11.329501] Console: switching to colour frame buffer device 240x67
[ 11.351615] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 35.097023] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 35.150715] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168f-1.fw (-2)
[ 35.150757] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[ 35.150760] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-2)
[ 35.169413] r8169 0000:03:00.0 enp3s0: link down
[ 35.169417] r8169 0000:03:00.0 enp3s0: link down
[ 35.169456] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 35.511414] vboxdrv: loading out-of-tree module taints kernel.
[ 35.514158] vboxdrv: Found 8 processor cores
[ 35.530649] vboxdrv: TSC mode is Invariant, tentative frequency 3399993382 Hz
[ 35.530650] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 35.742700] VBoxNetFlt: Successfully started.
[ 35.747017] VBoxNetAdp: Successfully started.
[ 35.752950] VBoxPciLinuxInit
[ 35.754669] vboxpci: IOMMU not found (not registered)
[ 36.381384] fuse init (API version 7.26)
[ 37.295211] r8169 0000:03:00.0 enp3s0: link up
[ 37.295220] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 46.958007] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[ 47.066861] usb 2-1.5: New USB device found, idVendor=abcd, idProduct=1234
[ 47.066864] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 47.066865] usb 2-1.5: Product: UDisk
[ 47.066867] usb 2-1.5: Manufacturer: General
[ 47.066868] usb 2-1.5: SerialNumber: 34
[ 47.067159] usb-storage 2-1.5:1.0: USB Mass Storage device detected
[ 47.067349] scsi host7: usb-storage 2-1.5:1.0
[ 48.090736] scsi 7:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[ 48.091409] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 48.091977] sd 7:0:0:0: [sdg] 131072000 512-byte logical blocks: (67.1 GB/62.5 GiB)
[ 48.092606] sd 7:0:0:0: [sdg] Write Protect is off
[ 48.092610] sd 7:0:0:0: [sdg] Mode Sense: 0b 00 00 08
[ 48.093225] sd 7:0:0:0: [sdg] No Caching mode page found
[ 48.093231] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 48.099601] sdg: sdg1
[ 48.102737] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 49.036673] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Vou usar o comando fsck e ver no que da



5. Re: Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

singleMan
singleMan

(usa Debian)

Enviado em 17/07/2017 - 14:19h

listeiro_037 escreveu:

Sem descaso:

Estou acostumado demais com terminal. Principalmente com pendrive e arquivos muito grandes. Na dúvida eu dou kill no comando cp e já era.


Se não conseguir resolver meu problema, o jeito vai ser apelar para ele rsrs


6. Re: Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

Alberto Federman Neto.
albfneto

(usa Sabayon)

Enviado em 18/07/2017 - 21:04h

que eu saiba, pode demorar mesmo, principalmente se forem arquivos muito grandes e em multitarefa.

Uma coisa que deixa mais lento ainda é usar FAT32 no pendrive, e copiar nele arquivos maiores de 3 ou 4 giga, ou com nomes muito longos.
se for assim, prefira antes formatar o pendrive em NTFS e não em FAT32.
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Albfneto,
Ribeirão Preto, S.P., Brasil.
Usuário Linux, Linux Counter: #479903.
Distros Favoritas: Sabayon, Gentoo, openSUSE, Mageia e OpenMandriva.


7. Re: Pendrive "travando" no processo de copiar arquivos [RESOLVIDO]

singleMan
singleMan

(usa Debian)

Enviado em 19/07/2017 - 23:17h

Obrigado a todos que responderam, mas vou dar a melhor resposta para o @mateusgabriel, pois foi com ela que cheguei a conclusao que meu pendrive estava corrompido.






Patrocínio

Site hospedado pelo provedor HostGator.
Linux banner
Linux banner
Linux banner

Destaques

Artigos

Dicas

Viva o Android

Tópicos

Top 10 do mês

Scripts