Descobrir os drivers certos [RESOLVIDO]

1. Descobrir os drivers certos [RESOLVIDO]

Daniel Oliveira da Paixão
danielpaixao

(usa Ubuntu)

Enviado em 03/06/2018 - 23:14h

Instalei o Deepin no meu computador e o sistema instalou os drivers genéricos e até certo ponto está funcionando bem. O áudio, porém, ficou meio estranho. Se aumento um pouco o volume, fica com o som de "taquara rachada".... Algo estranho. Minha placa é realtek. Será que tem como achar o driver correto no linux.


Vejam o relatório que gerei no terminal sobre meu computador. Tem um monte de informações mas sou leigo e não consigo interpretar essas informações. Alguém poderia lê-las e me passar um diagnóstico do meu hardware, por favor? Segue os dados coletados via terminal, comando dmseg


[email protected]:~$ sudo dmesg
[sudo] senha para ivanete:
[ 0.000000] Linux version 4.15.0-21deepin-generic ([email protected]) (gcc version 7.2.0 (Debian 7.2.0-20)) #21 SMP Mon May 21 05:20:09 UTC 2018 (Ubuntu 4.15.0-21deepin.21-generic 4.15.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=a3b6e92c-3779-44e8-90ea-32a88d5444c7 ro splash quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff80000-0x000000007ff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff8e000-0x000000007ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5WD2, BIOS 0501 03/27/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 080000000 mask F80000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x10af3e000, 0x10af3efff] PGTABLE
[ 0.000000] BRK [0x10af3f000, 0x10af3ffff] PGTABLE
[ 0.000000] BRK [0x10af40000, 0x10af40fff] PGTABLE
[ 0.000000] BRK [0x10af41000, 0x10af41fff] PGTABLE
[ 0.000000] BRK [0x10af42000, 0x10af42fff] PGTABLE
[ 0.000000] BRK [0x10af43000, 0x10af43fff] PGTABLE
[ 0.000000] BRK [0x10af44000, 0x10af44fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31ed1000-0x34f5ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FA960 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007FF80000 000034 (v01 A M I OEMRSDT 03000627 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FF80200 000081 (v01 A M I OEMFACP 03000627 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FF80410 00831C (v01 A0251 A0251000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000007FF8E000 000040
[ 0.000000] ACPI: APIC 0x000000007FF80390 000080 (v01 A M I OEMAPIC 03000627 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FF8E040 000066 (v01 A M I AMI_OEM 03000627 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FF88730 00003C (v01 A M I OEMMCFG 03000627 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x17ffd4000-0x17fffefff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8126 pages used for memmap
[ 0.000000] DMA32 zone: 520064 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff80000-0x7ff8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff8e000-0x7ffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xffafffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031947
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=a3b6e92c-3779-44e8-90ea-32a88d5444c7 ro splash quiet
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3983188K/4193400K available (12300K kernel code, 2470K rwdata, 4224K rodata, 2404K init, 2416K bss, 210212K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3010.728 MHz processor
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.45 BogoMIPS (lpj=12042912)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.032851] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032927] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032961] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033379] CPU: Physical Processor ID: 0
[ 0.033381] CPU: Processor Core ID: 0
[ 0.033383] mce: CPU supports 4 MCE banks
[ 0.033394] CPU0: Thermal monitoring enabled (TM1)
[ 0.033402] process: using mwait in idle threads
[ 0.033408] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[ 0.033410] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.033413] Spectre V2 : Mitigation: Full generic retpoline
[ 0.033649] Freeing SMP alternatives memory: 36K
[ 0.040000] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[ 0.040000] APIC delta adjusted to PM-Timer: 1254438 (1455227)
[ 0.040000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x4, stepping: 0x9)
[ 0.040000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.040000] ... version: 0
[ 0.040000] ... bit width: 40
[ 0.040000] ... generic registers: 18
[ 0.040000] ... value mask: 000000ffffffffff
[ 0.040000] ... max period: 0000007fffffffff
[ 0.040000] ... fixed-purpose events: 0
[ 0.040000] ... event mask: 000000000003ffff
[ 0.040000] Hierarchical SRCU implementation.
[ 0.040000] smp: Bringing up secondary CPUs ...
[ 0.040000] x86: Booting SMP configuration:
[ 0.040000] .... node #0, CPUs: #1
[ 0.048667] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.050710] smp: Brought up 1 node, 2 CPUs
[ 0.050710] smpboot: Max logical packages: 2
[ 0.050710] smpboot: Total of 2 processors activated (12042.91 BogoMIPS)
[ 0.052261] devtmpfs: initialized
[ 0.052261] x86/mm: Memory block size: 128MB
[ 0.053091] evm: security.selinux
[ 0.053093] evm: security.SMACK64
[ 0.053094] evm: security.SMACK64EXEC
[ 0.053095] evm: security.SMACK64TRANSMUTE
[ 0.053096] evm: security.SMACK64MMAP
[ 0.053097] evm: security.apparmor
[ 0.053098] evm: security.ima
[ 0.053099] evm: security.capability
[ 0.053228] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes)
[ 0.053348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.053348] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.053348] pinctrl core: initialized pinctrl subsystem
[ 0.053348] RTC time: 1:11:43, date: 06/04/18
[ 0.053348] NET: Registered protocol family 16
[ 0.053348] audit: initializing netlink subsys (disabled)
[ 0.053348] audit: type=2000 audit(1528074703.052:1): state=initialized audit_enabled=0 res=1
[ 0.053348] cpuidle: using governor ladder
[ 0.053348] cpuidle: using governor menu
[ 0.053348] ACPI: bus type PCI registered
[ 0.053348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053348] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.053348] PCI: not using MMCONFIG
[ 0.053348] PCI: Using configuration type 1 for base access
[ 0.056099] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.056375] ACPI: Added _OSI(Module Device)
[ 0.056377] ACPI: Added _OSI(Processor Device)
[ 0.056379] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.056380] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056695] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.073945] No Local Variables are initialized for Method [_PDC]
[ 0.073949] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.073950] Arg0: 00000000422b327c <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.073970] ACPI Error: Method parse/execution failed \_PR.CPU1._PDC, AE_INVALID_TABLE_LENGTH (20170831/psparse-550)
[ 0.074179] No Local Variables are initialized for Method [_PDC]
[ 0.074183] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.074185] Arg0: 00000000422b327c <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.074201] ACPI Error: Method parse/execution failed \_PR.CPU2._PDC, AE_INVALID_TABLE_LENGTH (20170831/psparse-550)
[ 0.075162] ACPI: Interpreter enabled
[ 0.075206] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.075209] ACPI: Using IOAPIC for interrupt routing
[ 0.075287] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.082415] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.082420] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.082441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.082988] ACPI: Enabled 11 GPEs in block 00 to 1F
[ 0.099506] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.099517] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.099527] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.099549] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.100042] PCI host bridge to bus 0000:00
[ 0.100047] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.100050] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.100053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.100056] pci_bus 0000:00: root bus resource [mem 0x80010000-0xffffffff window]
[ 0.100059] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.100074] pci 0000:00:00.0: [8086:2774] type 00 class 0x060000
[ 0.100259] pci 0000:00:01.0: [8086:2775] type 01 class 0x060400
[ 0.100324] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.100525] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.100551] pci 0000:00:1b.0: reg 0x10: [mem 0xbbef8000-0xbbefbfff 64bit]
[ 0.100640] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.100790] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.100884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.101049] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.101099] pci 0000:00:1d.0: reg 0x20: [io 0x7000-0x701f]
[ 0.101277] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.101327] pci 0000:00:1d.1: reg 0x20: [io 0x7400-0x741f]
[ 0.101501] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.101551] pci 0000:00:1d.2: reg 0x20: [io 0x7800-0x781f]
[ 0.101726] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.101775] pci 0000:00:1d.3: reg 0x20: [io 0x8000-0x801f]
[ 0.101955] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.101980] pci 0000:00:1d.7: reg 0x10: [mem 0xbbeff800-0xbbeffbff]
[ 0.102073] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.102225] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.102437] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.102543] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.102552] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.102558] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.102564] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.102734] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.102759] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.102769] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.102779] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.102789] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.102799] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.102821] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.102823] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.102826] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.102828] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.102983] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.103003] pci 0000:00:1f.2: reg 0x10: [io 0x9800-0x9807]
[ 0.103012] pci 0000:00:1f.2: reg 0x14: [io 0x9400-0x9403]
[ 0.103021] pci 0000:00:1f.2: reg 0x18: [io 0x9000-0x9007]
[ 0.103030] pci 0000:00:1f.2: reg 0x1c: [io 0x8800-0x8803]
[ 0.103039] pci 0000:00:1f.2: reg 0x20: [io 0x8400-0x840f]
[ 0.103049] pci 0000:00:1f.2: reg 0x24: [mem 0xbbeffc00-0xbbefffff]
[ 0.103089] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.103238] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.103299] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.103523] pci 0000:03:00.0: [10de:0401] type 00 class 0x030000
[ 0.103545] pci 0000:03:00.0: reg 0x10: [mem 0xbf000000-0xbfffffff]
[ 0.103558] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.103570] pci 0000:03:00.0: reg 0x1c: [mem 0xbc000000-0xbdffffff 64bit]
[ 0.103579] pci 0000:03:00.0: reg 0x24: [io 0xe800-0xe87f]
[ 0.103588] pci 0000:03:00.0: reg 0x30: [mem 0xbefe0000-0xbeffffff pref]
[ 0.103596] pci 0000:03:00.0: enabling Extended Tags
[ 0.112021] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.112026] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.112030] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.112035] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.112102] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.112107] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.112174] pci 0000:01:01.0: [1102:0007] type 00 class 0x040100
[ 0.112198] pci 0000:01:01.0: reg 0x10: [io 0xa800-0xa81f]
[ 0.112290] pci 0000:01:01.0: supports D1 D2
[ 0.112357] pci 0000:01:04.0: [1283:8211] type 00 class 0x018000
[ 0.112381] pci 0000:01:04.0: reg 0x10: [io 0xc400-0xc407]
[ 0.112392] pci 0000:01:04.0: reg 0x14: [io 0xc000-0xc003]
[ 0.112402] pci 0000:01:04.0: reg 0x18: [io 0xb800-0xb807]
[ 0.112413] pci 0000:01:04.0: reg 0x1c: [io 0xb400-0xb403]
[ 0.112423] pci 0000:01:04.0: reg 0x20: [io 0xb000-0xb00f]
[ 0.112443] pci 0000:01:04.0: reg 0x30: [mem 0xbbfa0000-0xbbfbffff pref]
[ 0.112543] pci 0000:01:05.0: [11ab:4320] type 00 class 0x020000
[ 0.112568] pci 0000:01:05.0: reg 0x10: [mem 0xbbffc000-0xbbffffff]
[ 0.112579] pci 0000:01:05.0: reg 0x14: [io 0xc800-0xc8ff]
[ 0.112625] pci 0000:01:05.0: reg 0x30: [mem 0xbbfc0000-0xbbfdffff pref]
[ 0.112672] pci 0000:01:05.0: supports D1 D2
[ 0.112675] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112773] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.112778] pci 0000:00:1e.0: bridge window [io 0xa000-0xcfff]
[ 0.112782] pci 0000:00:1e.0: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.112790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.112792] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.112795] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.112798] pci 0000:00:1e.0: bridge window [mem 0x80010000-0xffffffff window] (subtractive decode)
[ 0.114980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.115155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.115327] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.115499] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.115671] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.115843] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.116027] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.116197] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.116851] SCSI subsystem initialized
[ 0.116886] libata version 3.00 loaded.
[ 0.116886] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.116886] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.116886] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.116886] vgaarb: loaded
[ 0.116886] ACPI: bus type USB registered
[ 0.116886] usbcore: registered new interface driver usbfs
[ 0.116886] usbcore: registered new interface driver hub
[ 0.116886] usbcore: registered new device driver usb
[ 0.116886] EDAC MC: Ver: 3.0.0
[ 0.116886] PCI: Using ACPI for IRQ routing
[ 0.116886] PCI: pci_cache_line_size set to 64 bytes
[ 0.116886] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.116886] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff]
[ 0.116912] NetLabel: Initializing
[ 0.116914] NetLabel: domain hash size = 128
[ 0.116915] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.116940] NetLabel: unlabeled traffic allowed by default
[ 0.116981] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.116981] hpet clockevent registered
[ 0.116981] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.116981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.116981] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.121032] clocksource: Switched to clocksource hpet
[ 0.143859] VFS: Disk quotas dquot_6.6.0
[ 0.143890] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.144125] AppArmor: AppArmor Filesystem Enabled
[ 0.144184] pnp: PnP ACPI init
[ 0.144346] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.144358] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.144450] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.145189] pnp 00:02: [dma 2]
[ 0.145283] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.146108] pnp 00:03: [dma 3]
[ 0.146376] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.146512] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.146521] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147013] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.147016] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.147019] system 00:05: [io 0x0400-0x041f] has been reserved
[ 0.147022] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.147025] system 00:05: [io 0x0900-0x091f] has been reserved
[ 0.147028] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.147031] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.147034] system 00:05: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.147037] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.147047] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147486] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.147489] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.147499] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148613] pnp 00:07: [dma 0 disabled]
[ 0.148734] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.148876] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.148885] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149293] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.149297] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.149299] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.149302] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.149312] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.149676] pnp: PnP ACPI: found 10 devices
[ 0.158281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.158314] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.158318] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.158341] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
[ 0.158348] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 0.158352] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.158356] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.158361] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.158364] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.158370] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.158373] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.158378] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff]
[ 0.158383] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
[ 0.158391] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.158394] pci 0000:00:1e.0: bridge window [io 0xa000-0xcfff]
[ 0.158399] pci 0000:00:1e.0: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.158409] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.158412] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.158414] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.158416] pci_bus 0000:00: resource 7 [mem 0x80010000-0xffffffff window]
[ 0.158419] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.158421] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbfffffff]
[ 0.158424] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.158426] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.158428] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]
[ 0.158431] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[ 0.158433] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.158436] pci_bus 0000:01: resource 1 [mem 0xbbf00000-0xbbffffff]
[ 0.158438] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.158440] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.158443] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.158445] pci_bus 0000:01: resource 7 [mem 0x80010000-0xffffffff window]
[ 0.158582] NET: Registered protocol family 2
[ 0.158958] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.159075] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.159237] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.159341] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.159375] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.159504] NET: Registered protocol family 1
[ 0.160815] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.160827] PCI: CLS 16 bytes, default 64
[ 0.160920] Unpacking initramfs...
[ 1.454719] Freeing initrd memory: 49724K
[ 1.454812] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.454818] software IO TLB [mem 0x7bf80000-0x7ff80000] (64MB) mapped at [000000004177d690-00000000a1e6acd9]
[ 1.455019] Scanning for low memory corruption every 60 seconds
[ 1.456086] Initialise system trusted keyrings
[ 1.456102] Key type blacklist registered
[ 1.456199] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.458774] zbud: loaded
[ 1.459744] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.460112] fuse init (API version 7.26)
[ 1.463031] Key type asymmetric registered
[ 1.463035] Asymmetric key parser 'x509' registered
[ 1.463124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.463194] io scheduler noop registered
[ 1.463196] io scheduler deadline registered
[ 1.463292] io scheduler cfq registered (default)
[ 1.464419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.464438] ACPI: Power Button [PWRB]
[ 1.464516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.464563] ACPI: Power Button [PWRF]
[ 1.465171] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.485672] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.489835] Linux agpgart interface v0.103
[ 1.492812] loop: module loaded
[ 1.493069] ata_piix 0000:00:1f.1: version 2.13
[ 1.495396] scsi host0: ata_piix
[ 1.495574] scsi host1: ata_piix
[ 1.495649] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.495652] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.495913] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.496494] scsi host2: ata_piix
[ 1.496664] scsi host3: ata_piix
[ 1.496741] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23
[ 1.496743] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23
[ 1.497053] libphy: Fixed MDIO Bus: probed
[ 1.497055] tun: Universal TUN/TAP device driver, 1.6
[ 1.497151] PPP generic driver version 2.4.2
[ 1.497246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.497254] ehci-pci: EHCI PCI platform driver
[ 1.497485] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.497497] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.497513] ehci-pci 0000:00:1d.7: debug port 1
[ 1.501436] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
[ 1.501459] ehci-pci 0000:00:1d.7: irq 20, io mem 0xbbeff800
[ 1.516031] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.516117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.516120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516123] usb usb1: Product: EHCI Host Controller
[ 1.516125] usb usb1: Manufacturer: Linux 4.15.0-21deepin-generic ehci_hcd
[ 1.516127] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.516340] hub 1-0:1.0: USB hub found
[ 1.516354] hub 1-0:1.0: 8 ports detected
[ 1.516695] ehci-platform: EHCI generic platform driver
[ 1.516718] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.516725] ohci-pci: OHCI PCI platform driver
[ 1.516747] ohci-platform: OHCI generic platform driver
[ 1.516761] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.516930] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.516939] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.516948] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.516971] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000
[ 1.517058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.517061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517063] usb usb2: Product: UHCI Host Controller
[ 1.517065] usb usb2: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd
[ 1.517068] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.517258] hub 2-0:1.0: USB hub found
[ 1.517271] hub 2-0:1.0: 2 ports detected
[ 1.517626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.517634] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.517642] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.517676] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400
[ 1.517762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.517765] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517767] usb usb3: Product: UHCI Host Controller
[ 1.517770] usb usb3: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd
[ 1.517772] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.517958] hub 3-0:1.0: USB hub found
[ 1.517970] hub 3-0:1.0: 2 ports detected
[ 1.518292] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.518306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.518316] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.518348] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800
[ 1.518431] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.518434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.518437] usb usb4: Product: UHCI Host Controller
[ 1.518439] usb usb4: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd
[ 1.518441] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.518640] hub 4-0:1.0: USB hub found
[ 1.518653] hub 4-0:1.0: 2 ports detected
[ 1.518994] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.519002] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.519011] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.519046] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000
[ 1.519128] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.519131] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.519134] usb usb5: Product: UHCI Host Controller
[ 1.519136] usb usb5: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd
[ 1.519138] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.519319] hub 5-0:1.0: USB hub found
[ 1.519331] hub 5-0:1.0: 2 ports detected
[ 1.519629] i8042: PNP: No PS/2 controller found.
[ 1.519630] i8042: Probing ports directly.
[ 1.522067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.522076] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.522329] mousedev: PS/2 mouse device common for all mice
[ 1.522654] rtc_cmos 00:01: RTC can wake from S4
[ 1.522818] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.522849] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.522867] i2c /dev entries driver
[ 1.522975] device-mapper: uevent: version 1.0.3
[ 1.523108] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 1.523147] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.523741] NET: Registered protocol family 10
[ 1.531212] Segment Routing with IPv6
[ 1.531254] NET: Registered protocol family 17
[ 1.531345] Key type dns_resolver registered
[ 1.531669] RAS: Correctable Errors collector initialized.
[ 1.531737] microcode: sig=0xf49, pf=0x10, revision=0x3
[ 1.531816] microcode: Microcode Update Driver: v2.2.
[ 1.531839] sched_clock: Marking stable (1531805928, 0)->(1636136824, -104330896)
[ 1.532206] registered taskstats version 1
[ 1.532236] Loading compiled-in X.509 certificates
[ 1.537236] Loaded X.509 cert 'Build time autogenerated kernel key: 958c1de384c42d9479a5269a5637284f6aa8c75f'
[ 1.537285] zswap: loaded using pool lzo/zbud
[ 1.544342] Key type big_key registered
[ 1.544350] Key type trusted registered
[ 1.547637] Key type encrypted registered
[ 1.547645] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.547649] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.547687] evm: HMAC attrs: 0x1
[ 1.548091] Magic number: 6:19:154
[ 1.548254] rtc_cmos 00:01: setting system clock to 2018-06-04 01:11:44 UTC (1528074704)
[ 1.548447] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.548448] EDD information not available.
[ 1.674457] ata4.01: NODEV after polling detection
[ 1.696152] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 1.720150] ata4.00: configured for UDMA/100
[ 1.722615] ata3.00: HPA detected: current 312579695, native 312581808
[ 1.722620] ata3.00: ATA-7: MAXTOR STM3160815AS, 4.AAB, max UDMA/133
[ 1.722622] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.722761] ata3.01: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7
[ 1.722763] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.797581] ata3.00: configured for UDMA/133
[ 1.816272] ata3.01: configured for UDMA/133
[ 1.816544] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM316081 B PQ: 0 ANSI: 5
[ 1.816962] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.817006] sd 2:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.817068] sd 2:0:0:0: [sda] Write Protect is off
[ 1.817073] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817130] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.817325] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD161GJ 1118 PQ: 0 ANSI: 5
[ 1.817798] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 1.817851] sd 2:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.817886] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.817890] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.818267] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.821483] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 1.846331] sda: sda1
[ 1.883843] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.883846] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.884090] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.884227] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.885067] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.885544] sdb: sdb1 sdb2 sdb3
[ 1.886278] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.893728] Freeing unused kernel memory: 2404K
[ 1.893731] Write protecting the kernel read-only data: 20480k
[ 1.895182] Freeing unused kernel memory: 2008K
[ 1.903037] Freeing unused kernel memory: 1920K
[ 1.915456] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.915457] x86/mm: Checking user space page tables
[ 1.927648] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.988030] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.134330] Floppy drive(s): fd0 is 1.44M
[ 2.155809] FDC 0 is a post-1991 82077
[ 2.168943] pata_it821x: controller in pass through mode.
[ 2.176190] scsi host4: pata_it821x
[ 2.182477] scsi host5: pata_it821x
[ 2.182630] ata5: PATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb000 irq 19
[ 2.182633] ata6: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 19
[ 2.183157] skge: 1.14 addr 0xbbffc000 irq 21 chip Yukon-Lite rev 9
[ 2.183548] skge 0000:01:05.0 eth0: addr 00:15:f2:37:0e:73
[ 2.185061] usb 2-1: New USB device found, idVendor=10c4, idProduct=8105
[ 2.185066] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.185070] usb 2-1: Product: USB OPTICAL MOUSE
[ 2.185073] usb 2-1: Manufacturer: YSPRINGTECH
[ 2.209933] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170831/utaddress-247)
[ 2.209949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.299510] nouveau 0000:03:00.0: NVIDIA G84 (084100a2)
[ 2.384734] skge 0000:01:05.0 enp1s5: renamed from eth0
[ 2.398039] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.411676] nouveau 0000:03:00.0: bios: version 60.84.43.00.81
[ 2.428620] usbcore: registered new interface driver usbhid
[ 2.428624] usbhid: USB HID core driver
[ 2.433030] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:10C4:8105.0001/input/input5
[ 2.433268] hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 2.437934] nouveau 0000:03:00.0: bios: M0203T not found
[ 2.437940] nouveau 0000:03:00.0: bios: M0203E not matched!
[ 2.437945] nouveau 0000:03:00.0: fb: 512 MiB DDR2
[ 2.460002] tsc: Refined TSC clocksource calibration: 3010.652 MHz
[ 2.460013] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6593b0bd2, max_idle_ns: 440795216538 ns
[ 2.530433] [TTM] Zone kernel: Available graphics memory: 2019640 kiB
[ 2.530436] [TTM] Initializing pool allocator
[ 2.530444] [TTM] Initializing DMA pool allocator
[ 2.530476] nouveau 0000:03:00.0: DRM: VRAM: 512 MiB
[ 2.530479] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
[ 2.530485] nouveau 0000:03:00.0: DRM: TMDS table version 2.0
[ 2.530488] nouveau 0000:03:00.0: DRM: DCB version 4.0
[ 2.530492] nouveau 0000:03:00.0: DRM: DCB outp 00: 02000300 00000028
[ 2.530496] nouveau 0000:03:00.0: DRM: DCB outp 01: 04011310 00020030
[ 2.530498] nouveau 0000:03:00.0: DRM: DCB outp 02: 02011312 00020030
[ 2.530501] nouveau 0000:03:00.0: DRM: DCB outp 03: 010223f1 00c0c080
[ 2.530504] nouveau 0000:03:00.0: DRM: DCB conn 00: 1000
[ 2.530506] nouveau 0000:03:00.0: DRM: DCB conn 01: 2130
[ 2.530509] nouveau 0000:03:00.0: DRM: DCB conn 02: 0210
[ 2.530511] nouveau 0000:03:00.0: DRM: DCB conn 03: 0211
[ 2.530513] nouveau 0000:03:00.0: DRM: DCB conn 04: 0213
[ 2.541160] nouveau 0000:03:00.0: DRM: failed to create encoder 0/1/0: -19
[ 2.541165] nouveau 0000:03:00.0: DRM: TV-1 has no encoders, removing
[ 2.541254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.541256] [drm] Driver supports precise vblank timestamp query.
[ 2.616030] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 2.788996] usb 1-2: New USB device found, idVendor=0cf3, idProduct=9271
[ 2.789000] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.789002] usb 1-2: Product: USB2.0 WLAN
[ 2.789004] usb 1-2: Manufacturer: ATHEROS
[ 2.789006] usb 1-2: SerialNumber: 12345
[ 2.793952] nouveau 0000:03:00.0: DRM: MM: using CRYPT for buffer copies
[ 2.837960] nouveau 0000:03:00.0: DRM: allocated 1600x900 fb: 0x70000, bo 000000009d9f759b
[ 2.840343] fbcon: nouveaufb (fb0) is primary device
[ 2.997743] Console: switching to colour frame buffer device 200x56
[ 3.014401] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 3.028031] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
[ 3.060017] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.257511] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 3.257515] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.257517] usb 3-1: Product: USB Keyboard
[ 3.257519] usb 3-1: Manufacturer: SIGMACHIP
[ 3.274050] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1C4F:0002.0002/input/input6
[ 3.332274] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 3.345102] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1C4F:0002.0003/input/input7
[ 3.404232] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-1/input1
[ 3.484123] clocksource: Switched to clocksource tsc
[ 3.932007] raid6: sse2x1 gen() 2071 MB/s
[ 3.980003] raid6: sse2x1 xor() 1644 MB/s
[ 4.027988] raid6: sse2x2 gen() 2241 MB/s
[ 4.075999] raid6: sse2x2 xor() 1890 MB/s
[ 4.123998] raid6: sse2x4 gen() 2866 MB/s
[ 4.171999] raid6: sse2x4 xor() 1766 MB/s
[ 4.172002] raid6: using algorithm sse2x4 gen() 2866 MB/s
[ 4.172003] raid6: .... xor() 1766 MB/s, rmw enabled
[ 4.172005] raid6: using intx1 recovery algorithm
[ 4.174247] xor: measuring software checksum speed
[ 4.211991] prefetch64-sse: 5439.000 MB/sec
[ 4.251988] generic_sse: 5420.000 MB/sec
[ 4.251990] xor: using function: prefetch64-sse (5439.000 MB/sec)
[ 4.254125] async_tx: api initialized (async)
[ 5.382936] Btrfs loaded, crc32c=crc32c-generic
[ 18.364606] print_req_error: I/O error, dev fd0, sector 0
[ 18.364615] floppy: error 10 while reading block 0
[ 18.384282] random: crng init done
[ 18.390173] PM: Starting manual resume from disk
[ 18.390403] PM: Image not found (code -22)
[ 18.563951] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.779863] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.868277] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 19.868579] systemd[1]: Detected architecture x86-64.
[ 19.881761] systemd[1]: Set hostname to <ivanete-PC>.
[ 21.409272] systemd[1]: Listening on udev Control Socket.
[ 21.409489] systemd[1]: Listening on LVM2 poll daemon socket.
[ 21.409518] systemd[1]: Reached target User and Group Name Lookups.
[ 21.409623] systemd[1]: Listening on Journal Socket (/dev/log).
[ 21.409648] systemd[1]: Reached target Remote File Systems.
[ 21.409757] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 21.409833] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 21.762370] vfs_monitor: loading out-of-tree module taints kernel.
[ 21.762455] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[ 21.763165] mp: /, major: 8, minor: 17
[ 21.763170] partition count: 1, comm[302]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[ 21.885839] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 21.918595] register_kretprobes 10 ok
[ 22.127060] systemd-journald[298]: Received request to flush runtime journal from PID 1
[ 22.855007] lp: driver loaded but no devices found
[ 22.938789] ppdev: user-space parallel port driver
[ 22.960250] parport_pc 00:03: reported by Plug and Play ACPI
[ 22.960395] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 23.056194] lp0: using parport0 (interrupt-driven).
[ 23.132391] bbswitch: version 0.8
[ 23.132409] bbswitch: cannot find ACPI handle for VGA device 0000:03:00.0
[ 23.132413] bbswitch: No discrete VGA device found
[ 23.532189] intel_rng: FWH not detected
[ 23.701807] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 23.825174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.874807] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20170831/utaddress-247)
[ 23.874822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.874826] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20170831/utaddress-247)
[ 23.874837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.874838] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.937716] leds_ss4200: no LED devices found
[ 25.029677] snd_hda_codec_realtek hdaudioC0D0: ALC882: SKU not ready 0x411111f0
[ 25.030267] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC882: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 25.030272] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 25.030276] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 25.030279] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 25.030282] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 25.030285] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 25.030290] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 25.030293] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 25.030297] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 25.030300] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 25.050182] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 25.050344] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 25.050487] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 25.050628] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 25.050770] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 25.050913] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 25.051060] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 25.051200] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 25.305500] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 25.311178] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 25.391875] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 25.391882] cfg80211: failed to load regulatory.db
[ 25.653633] snd_ca0106 0000:01:01.0: Model 100a Rev 00000000 Serial 100a1102
[ 25.952074] usb 1-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 25.952280] usbcore: registered new interface driver ath9k_htc
[ 26.147847] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 26.196740] Error: Driver 'pcspkr' is already registered, aborting...
[ 26.360448] bbswitch: version 0.8
[ 26.360469] bbswitch: cannot find ACPI handle for VGA device 0000:03:00.0
[ 26.360474] bbswitch: No discrete VGA device found
[ 26.480277] usb 1-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 26.490636] Adding 11301884k swap on /dev/sdb2. Priority:-2 extents:1 across:11301884k FS
[ 26.732757] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 26.999885] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.4
[ 26.999890] ath9k_htc 1-2:1.0: FW RMW support: On
[ 26.999892] ath: EEPROM regdomain: 0x809c
[ 26.999894] ath: EEPROM indicates we should expect a country code
[ 26.999895] ath: doing EEPROM country->regdmn map search
[ 26.999897] ath: country maps to regdmn code: 0x52
[ 26.999898] ath: Country alpha2 being used: CN
[ 26.999900] ath: Regpair used: 0x52
[ 27.036963] ieee80211 phy0: Atheros AR9271 Rev:1
[ 28.159807] ath9k_htc 1-2:1.0 wlxc04a0020bad8: renamed from wlan0
[ 28.944370] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 28.944422] partition /home [8, 19] added, comm[404]: mount
[ 35.688757] IPv6: ADDRCONF(NETDEV_UP): enp1s5: link is not ready
[ 35.688977] skge 0000:01:05.0 enp1s5: enabling interface
[ 35.692284] IPv6: ADDRCONF(NETDEV_UP): enp1s5: link is not ready
[ 35.732971] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready
[ 35.920968] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready
[ 38.164929] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready
[ 40.929207] wlxc04a0020bad8: authenticate with 90:8d:78:61:e4:e0
[ 41.215853] wlxc04a0020bad8: send auth to 90:8d:78:61:e4:e0 (try 1/3)
[ 41.217587] wlxc04a0020bad8: authenticated
[ 41.224065] wlxc04a0020bad8: associate with 90:8d:78:61:e4:e0 (try 1/3)
[ 41.229688] wlxc04a0020bad8: RX AssocResp from 90:8d:78:61:e4:e0 (capab=0x411 status=0 aid=3)
[ 41.238408] wlxc04a0020bad8: associated
[ 41.444219] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc04a0020bad8: link becomes ready
[ 43.330405] NET: Registered protocol family 15
[ 44.750504] Initializing XFRM netlink socket
[ 62.660882] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 62.672794] partition /media/ivanete/12bcce66-f0f0-4482-9896-8a00c62c3ba8 [8, 1] added, comm[892]: mount
[ 71.259360] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[ 71.259370] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[ 71.259374] nouveau 0000:03:00.0: vp: init failed, -2
[ 71.259438] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[ 71.259442] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[ 71.259446] nouveau 0000:03:00.0: bsp: init failed, -2
[ 74.837872] print_req_error: I/O error, dev fd0, sector 0
[ 74.837881] floppy: error 10 while reading block 0
[ 87.091910] print_req_error: I/O error, dev fd0, sector 0
[ 87.091919] floppy: error 10 while reading block 0
[ 99.161755] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[ 99.161763] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[ 99.161768] nouveau 0000:03:00.0: vp: init failed, -2
[ 99.161834] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[ 99.161840] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[ 99.161843] nouveau 0000:03:00.0: bsp: init failed, -2
[ 642.303861] nouveau 0000:03:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 643.365544] nouveau 0000:03:00.0: therm: temperature (86 C) went below the 'fanboost' threshold
[ 1470.941314] perf: interrupt took too long (2535 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[ 2086.074643] perf: interrupt took too long (3188 > 3168), lowering kernel.perf_event_max_sample_rate to 62500
[ 2350.435796] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[ 2350.435803] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[ 2350.435807] nouveau 0000:03:00.0: vp: init failed, -2
[ 2350.435860] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[ 2350.435863] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[ 2350.435866] nouveau 0000:03:00.0: bsp: init failed, -2
[ 2350.622241] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[ 2350.622250] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[ 2350.622254] nouveau 0000:03:00.0: vp: init failed, -2
[ 2350.622316] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[ 2350.622321] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[ 2350.622324] nouveau 0000:03:00.0: bsp: init failed, -2
[ 2406.221155] perf: interrupt took too long (3995 > 3985), lowering kernel.perf_event_max_sample_rate to 50000
[ 2701.841681] print_req_error: I/O error, dev fd0, sector 0
[ 2701.841690] floppy: error 10 while reading block 0
[ 2714.121306] print_req_error: I/O error, dev fd0, sector 0
[ 2714.121318] floppy: error 10 while reading block 0
[ 3029.822285] sys_umount: /media/cdrom, 8, 17
[email protected]:~$




  


2. MELHOR RESPOSTA

Alberto Federman Neto.
albfneto

(usa Sabayon)

Enviado em 04/06/2018 - 11:31h

Bom dia.
editei um pouco a "quote" de seu post para organizar.

eu olhei seu hardware e tudo parece estar funcionando, inclusive as USBs, o gerenciamento de energia (ACPI) os slots PCI etc...

sim sua placa de audio é Realtek HD

por favor, abra um terminal e poste as saidas deste comandos relacionados ao som e pulseaudio:


$ ps -ef | grep pulse


no deepin, vc te algum regulador do som, um "mixer"? já checou?
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Albfneto,
Ribeirão Preto, S.P., Brasil.
Usuário Linux, Linux Counter: #479903.
Distros Favoritas: Sabayon, Gentoo, openSUSE, Mageia e OpenMandriva.