teeandy
(usa Outra)
Enviado em 13/08/2009 - 08:39h
hej
habe die richtigen Einstellungen für debian leny und zte mf626 gefunden:
alles als root (( vorsichtig ))
*****************************************************************************
*****************************************************************************
**
http://forum.ubuntu-fr.org/viewtopic.php?id=277541&p=1 **
**
http://forum.eeeuser.com/viewtopic.php?id=63274 **
*****************************************************************************
*****************************************************************************
lsusb shows all usb hardware
dmesg /etc/ttyUSB1 or /etc/ttyUSB2
...
*****************************************************************************
gedit ~/.wvdial.conf
*****************************************************************************
[Dialer Defaults]
Modem = /dev/ttyUSB2 ***** look with dmesg for USB1 or USB2...
ISDN = off
Modem Type = USB Modem
Baud = 7200000
Init = ATZ
Phone = *99#
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM1L3DT
Ask Password = off
APN =
www.yesss.at ******** apn from your provider
Password = off
Username = na
Auto Reconnect = off
Abort on Busy = off
Carrier Check = off
Check Def Route = off
Abort on No Dialtone = off
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = on
;Do NOT edit this file by hand!
Code:
*****************************************************************************
cat /etc/ppp/peers/wvdial
*****************************************************************************
noauth
name wvdial
usepeerdns
defaultroute
noipdefault
debug
ipcp-accept-local
noipv6
Code:
*****************************************************************************
/etc/ppp/options
*****************************************************************************
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
certaines opti
i tried these nameserver.....look in the internet for other, there are also free nameserver
Code:
*****************************************************************************
cat /etc/resolv.conf
*****************************************************************************
nameserver 200.222.0.34
nameserver 200.202.193.75
nameserver 208.67.222.222
nameserver 208.67.220.220
nameserver 10.11.12.13
nameserver 10.11.12.14
*****************************************************************************
sudo gedit /etc/usb_modeswitch.conf
*****************************************************************************
ZTE MF628+ (tested version from Telia / Sweden)
ZTE MF626
Contributor: Joakim Wennergren
DefaultVendor= 0x19d2
DefaultProduct= 0x2000
TargetVendor= 0x19d2
TargetProduct= 0x0031
MessageEndpoint=0x01
MessageContent="55534243123456782000000080000c8501 0101180101010101000000000000"
*****************************************************************************
sudo gedit /usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi
*****************************************************************************
Code:
<!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<!-- ZTE MF626 HSDPA USB Modem -->
<match key="@info.parent:usb.vendor_id" int="0x19d2">
<match key="@info.parent:usb.product_id" int="0x0031">
<match key="@info.parent:usb.interface.number" int="3">
<append key="modem.command_sets" type="strlist">GSM-07.07</append>
<append key="modem.command_sets" type="strlist">GSM-07.05</append>
<append key="info.capabilities" type="strlist">modem</append>
</match>
</match>
</match>
</device>
</deviceinfo>
Then Save and Quit
*****************************************************************************
sudo gedit /etc/udev/rules.d/90-zte.rules
*****************************************************************************
Code:
ACTION!="add", GOTO="ZTE_End"
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", GOTO="ZTE_ZeroCD"
LABEL="ZTE_ZeroCD"
RUN+="/usr/sbin/usb_modeswitch -W -c /etc/usb_modeswitch.conf"
LABEL="ZTE_End"
*****************************************************************************
$ sudo chattr +i /etc/resolv.conf"
*****************************************************************************
