Wireless no Ubuntu 10.04

ingridmachado
(usa Ubuntu)

Enviado em 08/05/2010 - 14:00h

Já vi muitos tópicos sobre wireless e testei todsas as soluções que encontrei e nenhuma funcionou pra mim.
Estou tentando migrar totalmente para o linux, mas estou encontrando problemas.

Eu tinha no pc o Ubuntu 9.10 e a wireless só funcionava de vez em quando, e quando atualizei para a versão 10.04 no primeiro dia funcionou perfeitamente. Agora, mesmo sem ter mudado nenhuma configuração, não consigo conectar pela wireless (que fica a todo momento pedindo senha) e nem com o próprio cabo da antena (é via rádio).
Consigo conectar com o modem 3g normalmente, o que não era possivel no 9.10.
O que posso fazer para estabilizar a conexão?

ingridmachado@ingridmachado-laptop:~$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller


ingridmachado@ingridmachado-laptop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0951:1613 Kingston Technology DataTraveler 8GB Pen Drive
Bus 001 Device 006: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Bus 001 Device 002: ID 5986:0200 Acer, Inc OrbiCam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Brigada.
E desculpem se a pergunta ficou muito grade.

JoseRenan
(usa Ubuntu)

Enviado em 08/05/2010 - 17:17h

de uma olhada no arquivo /etc/network/interfaces, talvez alterando algo a conexão pode acontecer automaticamente no boot.

angeloo
(usa Linux Mint)

Enviado em 08/05/2010 - 18:46h

Faça o seguinte, clique com o botão direito no icone de rede que fica em cima proximo ao botao desligar, va em editar conexões, e localize o sem fio remova tudo que estiver lá e feche, depois peça para procurar novamente sua rede sem fio, ai sim vc vai consegui conectar......
caso isso nao funcione, coloque o seu modem 3g...
e faça o seguine..
#aptitude update
ou
#apt-get update
#apt-get -f install

pcgaldo
(usa Ubuntu)

Enviado em 08/05/2010 - 20:22h

Eu também tenho o mesmo cartão wifi:
Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter

Trabalhei sem problema em Karmic e ao atualizar a Lucid também fiquei sem conexões sem fio.
Depois de fazer procuras e consultas nos bugs de Launchpad, sem ter respostas que aportassem uma solução, esta mesma semana recuperei a conexão, e isso sem tão sequer atualizar o kernel.

O problema era que o hardware-switch do cartão ficava desligado ao iniciar Ubuntu, sem possibilidade de o ligar. Ainda não sei qual foi a mudança que deu solução ao meu problema, mas o importante é que agora a rede sem fio roda no meu laptop.

Eu acho que com uma atualização o problema há desaparecer.

angeloo
(usa Linux Mint)

Enviado em 08/05/2010 - 21:18h

NAo sei vem ao caso mas seria interessante que durante a atualização da versao 9.10 para a 10.04, a pĺaca de rede fique ligada para ela ser identificada pelo sistema, ou vc ir em drivers de hardware para instalar os drivers....

pcgaldo
(usa Ubuntu)

Enviado em 09/05/2010 - 08:45h

Abra o terminal e tire um log de dmesg:

dmesg > dmesg.log

O arquivo dmesg.log ficará na sua pasta pessoal. Copie e cole o contido do arquivo, a ver se o seu problema é similar ao que eu tive.

Ingrid, assegure-se também de que todas as configurações da conexão sejam corretas: as IPs, a rota padrão, etc.

No meu caso, num laptop OKI NB0508, não tenho um interruptor físico para desligar a wlan. Só é possível fazê-lo desde a BIOS.

Ainda assim, quando atualizei a Lucid a wlan ficou desligada, o hardware switch ficou em off. Além disso, não podia usar outros cartões wifi se não incorporava ao blacklist o driver rtl8187.

ingridmachado
(usa Ubuntu)

Enviado em 09/05/2010 - 17:04h

JoseRenan:
Acessei o arquivo /etc/network/interfaces e o conteúdo dele era esse:

auto lo
iface lo inet loopback

Mas não sei o que significa.


Angeloo:
Agora estou conectada no 3g para responder o tópico, mas vou testar e já posto o resultado.
E eu também não me lembro se quando instalei o ubuntu estava ligada ou não a placa de rede.
E nos drives de hardware tem apenas um identificado: Aplicativo Modem. Não sei tem como identificar mais drivers ou ele só identifica automaticamente.

Pcgaldo:
Conteúdo do arquivo dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7d90000 (usable)
[ 0.000000] BIOS-e820: 00000000b7d90000 - 00000000b7d9b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7d9b000 - 00000000b7d9c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7d9c000 - 00000000b8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb7d90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b7d90000 (usable)
[ 0.000000] modified: 00000000b7d90000 - 00000000b7d9b000 (ACPI data)
[ 0.000000] modified: 00000000b7d9b000 - 00000000b7d9c000 (ACPI NVS)
[ 0.000000] modified: 00000000b7d9c000 - 00000000b8000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37859000 - 37fefa60
[ 0.000000] Allocated new RAMDISK: 008de000 - 01074a60
[ 0.000000] Move RAMDISK from 0000000037859000 - 0000000037fefa5f to 008de000 - 01074a5f
[ 0.000000] ACPI: RSDP 000f7f20 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT b7d9274a 0008C (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP b7d9acfc 000F4 (v03 SiS 671MX 06040000 PTL 000F4240)
[ 0.000000] ACPI: DSDT b7d967a1 044E7 (v01 PTLTD 671 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS b7d9bfc0 00040
[ 0.000000] ACPI: APIC b7d9adf0 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: SLIC b7d9ae4e 00176 (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG b7d9afc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT b7d9407a 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93fd4 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93f2e 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93e88 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93de2 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93d3c 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93c96 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d93bf0 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT b7d927d6 0141A (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2053MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd244] BRK ==> [00008da000 - 00008dd244]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 0001074a60] NEW RAMDISK ==> [00008de000 - 0001074a60]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f7fd0] f7fd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000b7d90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b7d90
[ 0.000000] On node 0 totalpages: 752925
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1076200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4108 pages used for memmap
[ 0.000000] HighMem zone: 521606 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747041
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=3db93a50-c2b5-4591-b118-a1948e7d0103 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15060480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000b7d90)
[ 0.000000] Memory: 2955580k/3012160k available (4673k kernel code, 55088k reserved, 2122k data, 656k init, 2102856k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.135 MHz processor.
[ 0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.27 BogoMIPS (lpj=8000540)
[ 0.008050] Security Framework initialized
[ 0.008102] AppArmor: AppArmor initialized
[ 0.008116] Mount-cache hash table entries: 512
[ 0.008413] Initializing cgroup subsys ns
[ 0.008423] Initializing cgroup subsys cpuacct
[ 0.008432] Initializing cgroup subsys memory
[ 0.008446] Initializing cgroup subsys devices
[ 0.008451] Initializing cgroup subsys freezer
[ 0.008455] Initializing cgroup subsys net_cls
[ 0.008497] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008501] CPU: L2 cache: 1024K
[ 0.008506] CPU: Physical Processor ID: 0
[ 0.008510] CPU: Processor Core ID: 0
[ 0.008516] mce: CPU supports 6 MCE banks
[ 0.008535] CPU0: Thermal monitoring enabled (TM1)
[ 0.012015] using mwait in idle threads.
[ 0.012029] Performance Events: Core2 events, Intel PMU driver.
[ 0.012048] ... version: 2
[ 0.012051] ... bit width: 40
[ 0.012053] ... generic registers: 2
[ 0.012057] ... value mask: 000000ffffffffff
[ 0.012061] ... max period: 000000007fffffff
[ 0.012065] ... fixed-purpose events: 3
[ 0.012066] ... event mask: 0000000700000003
[ 0.012079] Checking 'hlt' instruction... OK.
[ 0.033390] ACPI: Core revision 20090903
[ 0.052030] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.052041] ftrace: allocating 21771 entries in 43 pages
[ 0.056073] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.056324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.098570] CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a
[ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 1024K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU1: Thermal monitoring enabled (TM1)
[ 0.184059] CPU1: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a
[ 0.184073] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.188022] Brought up 2 CPUs
[ 0.188025] Total of 2 processors activated (7999.35 BogoMIPS).
[ 0.188476] CPU0 attaching sched-domain:
[ 0.188480] domain 0: span 0-1 level MC
[ 0.188482] groups: 0 1
[ 0.188489] CPU1 attaching sched-domain:
[ 0.188491] domain 0: span 0-1 level MC
[ 0.188493] groups: 1 0
[ 0.188611] devtmpfs: initialized
[ 0.188611] regulator: core version 0.5
[ 0.188611] Time: 16:42:27 Date: 05/09/10
[ 0.188611] NET: Registered protocol family 16
[ 0.188611] Trying to unpack rootfs image as initramfs...
[ 0.188611] EISA bus registered
[ 0.188611] ACPI: bus type pci registered
[ 0.188611] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 3
[ 0.188611] PCI: MCFG area at e0000000 reserved in E820
[ 0.188611] PCI: Using MMCONFIG for extended config space
[ 0.188611] PCI: Using configuration type 1 for base access
[ 0.192142] bio: create slab <bio-0> at 0
[ 0.192836] ACPI: EC: Look up EC in DSDT
[ 0.196162] ACPI: BIOS _OSI(Linux) query ignored
[ 0.197054] ACPI: Interpreter enabled
[ 0.197054] ACPI: (supports S0 S3 S4 S5)
[ 0.197054] ACPI: Using IOAPIC for interrupt routing
[ 0.202874] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.204285] ACPI: No dock devices found.
[ 0.204949] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.205010] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.205176] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.205183] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.205190] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.205197] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.205204] pci 0000:00:02.5: reg 20 io port: [0x1080-0x108f]
[ 0.205240] pci 0000:00:02.5: PME# supported from D3cold
[ 0.205245] pci 0000:00:02.5: PME# disabled
[ 0.205272] pci 0000:00:03.0: reg 10 32bit mmio: [0xd8404000-0xd8404fff]
[ 0.205326] pci 0000:00:03.1: reg 10 32bit mmio: [0xd8405000-0xd8405fff]
[ 0.205390] pci 0000:00:03.3: reg 10 32bit mmio: [0xd8406000-0xd8406fff]
[ 0.205436] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.205440] pci 0000:00:03.3: PME# disabled
[ 0.205478] pci 0000:00:04.0: reg 10 32bit mmio: [0xd8407000-0xd840707f]
[ 0.205486] pci 0000:00:04.0: reg 14 io port: [0x1000-0x107f]
[ 0.205526] pci 0000:00:04.0: supports D1 D2
[ 0.205528] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205534] pci 0000:00:04.0: PME# disabled
[ 0.205571] pci 0000:00:05.0: reg 10 io port: [0x10c8-0x10cf]
[ 0.205578] pci 0000:00:05.0: reg 14 io port: [0x10bc-0x10bf]
[ 0.205585] pci 0000:00:05.0: reg 18 io port: [0x10c0-0x10c7]
[ 0.205592] pci 0000:00:05.0: reg 1c io port: [0x10b8-0x10bb]
[ 0.205599] pci 0000:00:05.0: reg 20 io port: [0x10a0-0x10af]
[ 0.205628] pci 0000:00:05.0: PME# supported from D3cold
[ 0.205632] pci 0000:00:05.0: PME# disabled
[ 0.205722] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.205726] pci 0000:00:06.0: PME# disabled
[ 0.205824] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.205828] pci 0000:00:07.0: PME# disabled
[ 0.205879] pci 0000:00:0f.0: reg 10 32bit mmio: [0xd8400000-0xd8403fff]
[ 0.205928] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.205933] pci 0000:00:0f.0: PME# disabled
[ 0.206028] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
[ 0.206033] pci 0000:00:1f.0: PME# disabled
[ 0.206081] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.206087] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xd801ffff]
[ 0.206093] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f]
[ 0.206124] pci 0000:01:00.0: supports D1 D2
[ 0.206163] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.206168] pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xd80fffff]
[ 0.206173] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.206229] pci 0000:00:06.0: bridge io port: [0x3000-0x4fff]
[ 0.206234] pci 0000:00:06.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.206302] pci 0000:03:00.0: reg 10 32bit mmio: [0xd8100000-0xd81000ff]
[ 0.206357] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.206473] pci 0000:03:00.2: reg 10 32bit mmio: [0xd8100400-0xd81004ff]
[ 0.206641] pci 0000:03:00.3: reg 10 32bit mmio: [0xd8100800-0xd81008ff]
[ 0.206817] pci 0000:00:07.0: bridge 32bit mmio: [0xd8100000-0xd81fffff]
[ 0.206897] pci_bus 0000:00: on NUMA node 0
[ 0.206904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.214673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[ 0.214795] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[ 0.214896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
[ 0.214997] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.215125] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.215224] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[ 0.215324] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[ 0.215429] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.215578] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.215583] vgaarb: loaded
[ 0.215723] SCSI subsystem initialized
[ 0.215848] libata version 3.00 loaded.
[ 0.215931] usbcore: registered new interface driver usbfs
[ 0.215945] usbcore: registered new interface driver hub
[ 0.215972] usbcore: registered new device driver usb
[ 0.216180] ACPI: WMI: Mapper loaded
[ 0.216183] PCI: Using ACPI for IRQ routing
[ 0.216363] NetLabel: Initializing
[ 0.216365] NetLabel: domain hash size = 128
[ 0.216366] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.216380] NetLabel: unlabeled traffic allowed by default
[ 0.216419] Switching to clocksource tsc
[ 0.218308] AppArmor: AppArmor Filesystem Enabled
[ 0.218341] pnp: PnP ACPI init
[ 0.218371] ACPI: bus type pnp registered
[ 0.220810] pnp: PnP ACPI: found 10 devices
[ 0.220813] ACPI: ACPI bus type pnp unregistered
[ 0.220820] PnPBIOS: Disabled by ACPI PNP
[ 0.220835] system 00:04: ioport range 0x8000-0x80be has been reserved
[ 0.220838] system 00:04: ioport range 0x8100-0x812f has been reserved
[ 0.220841] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.220844] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.220848] system 00:04: ioport range 0x261-0x261 has been reserved
[ 0.220850] system 00:04: ioport range 0x200-0x20f has been reserved
[ 0.220853] system 00:04: ioport range 0x400-0x40f has been reserved
[ 0.220858] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.220861] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.220864] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.220866] system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.220869] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 0.220872] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 0.220875] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.255621] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.255626] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.255632] pci 0000:00:01.0: MEM window: 0xd8000000-0xd80fffff
[ 0.255637] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
[ 0.255644] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.255647] pci 0000:00:06.0: IO window: 0x3000-0x4fff
[ 0.255653] pci 0000:00:06.0: MEM window: 0xdc000000-0xdfffffff
[ 0.255657] pci 0000:00:06.0: PREFETCH window: 0x000000b8000000-0x000000b81fffff
[ 0.255665] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.255669] pci 0000:00:07.0: IO window: 0x2000-0x2fff
[ 0.255674] pci 0000:00:07.0: MEM window: 0xd8100000-0xd81fffff
[ 0.255679] pci 0000:00:07.0: PREFETCH window: 0xb8200000-0xb83fffff
[ 0.255686] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:04
[ 0.255688] pci 0000:00:1f.0: IO window: disabled
[ 0.255693] pci 0000:00:1f.0: MEM window: disabled
[ 0.255698] pci 0000:00:1f.0: PREFETCH window: disabled
[ 0.255718] pci 0000:00:01.0: setting latency timer to 64
[ 0.255734] alloc irq_desc for 16 on node -1
[ 0.255736] alloc kstat_irqs on node -1
[ 0.255747] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.255751] pci 0000:00:06.0: setting latency timer to 64
[ 0.255761] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.255765] pci 0000:00:07.0: setting latency timer to 64
[ 0.255776] pci 0000:00:1f.0: setting latency timer to 64
[ 0.255782] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255785] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.255787] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.255790] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd80fffff]
[ 0.255793] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.255795] pci_bus 0000:09: resource 0 io: [0x3000-0x4fff]
[ 0.255798] pci_bus 0000:09: resource 1 mem: [0xdc000000-0xdfffffff]
[ 0.255801] pci_bus 0000:09: resource 2 pref mem [0xb8000000-0xb81fffff]
[ 0.255803] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.255806] pci_bus 0000:03: resource 1 mem: [0xd8100000-0xd81fffff]
[ 0.255808] pci_bus 0000:03: resource 2 pref mem [0xb8200000-0xb83fffff]
[ 0.255866] NET: Registered protocol family 2
[ 0.255982] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.256350] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.257252] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.257818] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.257821] TCP reno registered
[ 0.257989] NET: Registered protocol family 1
[ 0.258131] pci 0000:01:00.0: Boot video device
[ 0.258396] cpufreq-nforce2: No nForce2 chipset.
[ 0.258428] Scanning for low memory corruption every 60 seconds
[ 0.258578] audit: initializing netlink socket (disabled)
[ 0.258595] type=2000 audit(1273423345.255:1): initialized
[ 0.268789] highmem bounce pool size: 64 pages
[ 0.268795] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.270410] VFS: Disk quotas dquot_6.5.2
[ 0.270480] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.271117] fuse init (API version 7.13)
[ 0.271216] msgmni has been set to 1667
[ 0.271503] alg: No test for stdrng (krng)
[ 0.271566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.271570] io scheduler noop registered
[ 0.271572] io scheduler anticipatory registered
[ 0.271574] io scheduler deadline registered
[ 0.271618] io scheduler cfq registered (default)
[ 0.271806] alloc irq_desc for 24 on node -1
[ 0.271809] alloc kstat_irqs on node -1
[ 0.271825] pcieport 0000:00:06.0: irq 24 for MSI/MSI-X
[ 0.271838] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.271985] alloc irq_desc for 25 on node -1
[ 0.271987] alloc kstat_irqs on node -1
[ 0.271996] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
[ 0.272005] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.272133] alloc irq_desc for 26 on node -1
[ 0.272135] alloc kstat_irqs on node -1
[ 0.272143] pcieport 0000:00:1f.0: irq 26 for MSI/MSI-X
[ 0.272153] pcieport 0000:00:1f.0: setting latency timer to 64
[ 0.272231] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.272304] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393526] Freeing initrd memory: 7770k freed
[ 0.396192] ACPI: AC Adapter [AC] (off-line)
[ 0.396384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.396392] ACPI: Power Button [PWRB]
[ 0.396475] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.396483] ACPI: Sleep Button [SLPB]
[ 0.396550] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.397069] ACPI: Lid Switch [LID]
[ 0.397230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.397236] ACPI: Power Button [PWRF]
[ 0.398412] ACPI: SSDT b7d94b94 00258 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.400202] ACPI: SSDT b7d942d9 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.402233] Monitor-Mwait will be used to enter C-1 state
[ 0.402286] Monitor-Mwait will be used to enter C-2 state
[ 0.402296] Marking TSC unstable due to TSC halts in idle
[ 0.402353] Switching to clocksource acpi_pm
[ 0.402479] processor LNXCPU:00: registered as cooling_device0
[ 0.403015] ACPI: SSDT b7d94dec 001A9 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.403371] ACPI: SSDT b7d947f1 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.403976] processor LNXCPU:01: registered as cooling_device1
[ 0.414844] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.414854] ACPI: Thermal Zone [THRM] (45 C)
[ 0.414994] isapnp: Scanning for PnP cards...
[ 0.416452] hpet_acpi_add: no address or irqs in _CRS
[ 0.416519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.417871] brd: module loaded
[ 0.418343] loop: module loaded
[ 0.418437] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.418580] pata_sis 0000:00:02.5: version 0.5.2
[ 0.418602] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.418735] scsi0 : pata_sis
[ 0.418817] scsi1 : pata_sis
[ 0.419067] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[ 0.419070] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[ 0.419110] alloc irq_desc for 17 on node -1
[ 0.419112] alloc kstat_irqs on node -1
[ 0.419120] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.419159] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 0.419461] Fixed MDIO Bus: probed
[ 0.419495] PPP generic driver version 2.4.2
[ 0.419543] tun: Universal TUN/TAP device driver, 1.6
[ 0.419544] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.419633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.419651] alloc irq_desc for 22 on node -1
[ 0.419653] alloc kstat_irqs on node -1
[ 0.419657] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.419676] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.419720] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.419764] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd8406000
[ 0.431362] ACPI: Battery Slot [BAT0] (battery present)
[ 0.432012] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.432129] usb usb1: configuration #1 chosen from 1 choice
[ 0.432162] hub 1-0:1.0: USB hub found
[ 0.432170] hub 1-0:1.0: 8 ports detected
[ 0.432237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.432253] alloc irq_desc for 20 on node -1
[ 0.432255] alloc kstat_irqs on node -1
[ 0.432260] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.432274] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.432307] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.432327] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd8404000
[ 0.492066] usb usb2: configuration #1 chosen from 1 choice
[ 0.492094] hub 2-0:1.0: USB hub found
[ 0.492105] hub 2-0:1.0: 4 ports detected
[ 0.492151] alloc irq_desc for 21 on node -1
[ 0.492153] alloc kstat_irqs on node -1
[ 0.492158] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.492169] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.492203] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.492220] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd8405000
[ 0.550069] usb usb3: configuration #1 chosen from 1 choice
[ 0.550099] hub 3-0:1.0: USB hub found
[ 0.550106] hub 3-0:1.0: 4 ports detected
[ 0.550155] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.550241] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.554503] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.557021] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.557028] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.557055] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.557077] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.557098] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.557220] mice: PS/2 mouse device common for all mice
[ 0.557409] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.557429] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.557530] device-mapper: uevent: version 1.0.3
[ 0.557642] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.557713] device-mapper: multipath: version 1.1.0 loaded
[ 0.557716] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.557832] EISA: Probing bus 0 at eisa.0
[ 0.557839] Cannot allocate resource for EISA slot 1
[ 0.557841] Cannot allocate resource for EISA slot 2
[ 0.557844] Cannot allocate resource for EISA slot 3
[ 0.557846] Cannot allocate resource for EISA slot 4
[ 0.557858] Cannot allocate resource for EISA slot 8
[ 0.557860] EISA: Detected 0 cards.
[ 0.557998] cpuidle: using governor ladder
[ 0.558089] cpuidle: using governor menu
[ 0.558539] TCP cubic registered
[ 0.558691] NET: Registered protocol family 10
[ 0.559171] lo: Disabled Privacy Extensions
[ 0.559509] NET: Registered protocol family 17
[ 0.559989] Using IPI No-Shortcut mode
[ 0.560102] PM: Resume from disk failed.
[ 0.560116] registered taskstats version 1
[ 0.560474] Magic number: 10:51:742
[ 0.560584] rtc_cmos 00:02: setting system clock to 2010-05-09 16:42:27 UTC (1273423347)
[ 0.560588] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.560590] EDD information not available.
[ 0.593449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.753023] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 0.771102] isapnp: No Plug & Play device found
[ 0.771146] ata2: port disabled. ignoring.
[ 0.771174] Freeing unused kernel memory: 656k freed
[ 0.771536] Write protecting the kernel text: 4676k
[ 0.771579] Write protecting the kernel read-only data: 1840k
[ 0.790801] udev: starting version 151
[ 0.872612] sata_sis 0000:00:05.0: version 1.0
[ 0.872632] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.872639] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 0.882804] scsi2 : sata_sis
[ 0.896445] usb 1-4: configuration #1 chosen from 1 choice
[ 0.896817] scsi3 : sata_sis
[ 0.897505] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 17
[ 0.897509] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 17
[ 0.911114] Initializing USB Mass Storage driver...
[ 0.911874] scsi6 : SCSI emulation for USB Mass Storage devices
[ 0.912056] usb-storage: device found at 2
[ 0.912059] usb-storage: waiting for device to settle before scanning
[ 0.912728] scsi7 : SCSI emulation for USB Mass Storage devices
[ 0.912853] usbcore: registered new interface driver usb-storage
[ 0.912856] USB Mass Storage support registered.
[ 0.912863] usb-storage: device found at 2
[ 0.912865] usb-storage: waiting for device to settle before scanning
[ 1.012053] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 1.107101] ata3.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133
[ 1.107107] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.120698] ata3.00: configured for UDMA/133
[ 1.120857] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5
[ 1.121048] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.121065] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.121212] sd 2:0:0:0: [sda] Write Protect is off
[ 1.121215] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.121241] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.121462] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.160463] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.284263] ata4.00: ATAPI: HL-DT-ST DVDRAM GT20N, CP02, max UDMA/133
[ 1.300278] ata4.00: configured for UDMA/133
[ 1.305748] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CP02 PQ: 0 ANSI: 5
[ 1.317160] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.317166] Uniform CD-ROM driver Revision: 3.20
[ 1.317323] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.317399] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.422740] usb 1-7: configuration #1 chosen from 1 choice
[ 1.800552] kjournald starting. Commit interval 5 seconds
[ 1.800566] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.913430] usb-storage: device scan complete
[ 5.915390] usb-storage: device scan complete
[ 5.915517] scsi 7:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[ 5.915964] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 5.917639] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 5.925519] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 5.931362] sr1: scsi-1 drive
[ 5.931506] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 5.931562] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 16.715887] udev: starting version 151
[ 16.784919] Adding 1022968k swap on /dev/sda5. Priority:-1 extents:1 across:1022968k
[ 16.833249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.836060] Linux agpgart interface v0.103
[ 16.839913] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[ 16.916062] sdhci: Secure Digital Host Controller Interface driver
[ 16.916066] sdhci: Copyright(c) Pierre Ossman
[ 16.937526] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 16.937555] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.937616] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 16.937675] Registered led device: mmc0::
[ 16.937720] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
[ 16.937747] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 16.937768] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.937777] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[ 16.937784] sdhci-pci 0000:03:00.2: PCI INT A disabled
[ 16.964555] lp: driver loaded but no devices found
[ 17.002282] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 17.002352] sis190 Gigabit Ethernet driver 1.3 loaded.
[ 17.002380] alloc irq_desc for 19 on node -1
[ 17.002382] alloc kstat_irqs on node -1
[ 17.002392] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.002406] sis190 0000:00:04.0: setting latency timer to 64
[ 17.002428] 0000:00:04.0: Read MAC address from EEPROM
[ 17.010756] Linux video capture interface: v2.00
[ 17.075427] acpi device:0d: registered as cooling_device2
[ 17.075550] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/LNXVIDEO:00/input/input6
[ 17.075625] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.091176] type=1505 audit(1273434164.028:2): operation="profile_load" pid=569 name="/sbin/dhclient3"
[ 17.091870] type=1505 audit(1273434164.028:3): operation="profile_load" pid=569 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.092266] type=1505 audit(1273434164.028:4): operation="profile_load" pid=569 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.099116] usbcore: registered new interface driver usbserial
[ 17.099163] USB Serial support registered for generic
[ 17.099243] usbcore: registered new interface driver usbserial_generic
[ 17.099246] usbserial: USB Serial Driver core
[ 17.100512] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.100522] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[ 17.101807] 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
[ 17.102872] vga16fb: initializing
[ 17.102878] vga16fb: mapped to 0xc00a0000
[ 17.102985] fb0: VGA16 VGA frame buffer device
[ 17.107149] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0200)
[ 17.207937] Console: switching to colour frame buffer device 80x30
[ 17.214661] EXT3 FS on sda3, internal journal
[ 17.245272] USB Serial support registered for GSM modem (1-port)
[ 17.246414] option 1-4:1.0: GSM modem (1-port) converter detected
[ 17.246732] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[ 17.246752] option 1-4:1.1: GSM modem (1-port) converter detected
[ 17.246912] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1
[ 17.246948] usbcore: registered new interface driver option
[ 17.246951] option: v0.7.2:USB Driver for GSM modems
[ 17.269989] input: USB2.0 Camera as /devices/pci0000:00/0000:00:03.3/usb1/1-7/1-7:1.0/input/input7
[ 17.270055] usbcore: registered new interface driver uvcvideo
[ 17.270059] USB Video Class driver (v0.1.0)
[ 17.612228] 0000:00:04.0: Using transceiver at address 1 as default.
[ 17.644947] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8212000 (IRQ: 19), 00:90:f5:79:a1:a7
[ 17.644951] eth0: GMII mode.
[ 17.644958] eth0: Enabling Auto-negotiation.
[ 17.676195] alloc irq_desc for 18 on node -1
[ 17.676198] alloc kstat_irqs on node -1
[ 17.676206] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.676256] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 17.774132] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000
[ 17.783738] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 17.785143] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input8
[ 17.811555] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 17.902628] type=1505 audit(1273434164.839:5): operation="profile_load" pid=766 name="/usr/share/gdm/guest-session/Xsession"
[ 17.904757] type=1505 audit(1273434164.843:6): operation="profile_replace" pid=767 name="/sbin/dhclient3"
[ 17.905456] type=1505 audit(1273434164.843:7): operation="profile_replace" pid=767 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.905835] type=1505 audit(1273434164.843:8): operation="profile_replace" pid=767 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.910741] type=1505 audit(1273434164.847:9): operation="profile_load" pid=768 name="/usr/bin/evince"
[ 17.919726] type=1505 audit(1273434164.855:10): operation="profile_load" pid=768 name="/usr/bin/evince-previewer"
[ 17.925761] type=1505 audit(1273434164.863:11): operation="profile_load" pid=768 name="/usr/bin/evince-thumbnailer"
[ 18.079363] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.350130] ppdev: user-space parallel port driver
[ 21.486008] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 27.631642] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 27.681591] ISOFS: changing to secondary root
[ 28.100044] eth0: auto-negotiating...
[ 28.124115] eth0: auto-negotiating...
[ 38.148040] eth0: auto-negotiating...
[ 50.928036] eth0: auto-negotiating...
[ 60.952042] eth0: auto-negotiating...
[ 70.976036] eth0: auto-negotiating...
[ 72.205895] PPP BSD Compression module registered
[ 72.219603] PPP Deflate Compression module registered
[ 81.000043] eth0: auto-negotiating...
[ 91.024046] eth0: auto-negotiating...
[ 101.048043] eth0: auto-negotiating...
[ 111.072037] eth0: auto-negotiating...
[ 121.096041] eth0: auto-negotiating...
[ 131.128096] eth0: auto-negotiating...
[ 141.152045] eth0: auto-negotiating...
[ 151.176040] eth0: auto-negotiating...
[ 161.200045] eth0: auto-negotiating...
[ 171.224088] eth0: auto-negotiating...
[ 181.248038] eth0: auto-negotiating...
[ 191.272042] eth0: auto-negotiating...
[ 201.296018] eth0: auto-negotiating...
[ 211.321292] eth0: auto-negotiating...
[ 221.348038] eth0: auto-negotiating...
[ 231.369035] eth0: auto-negotiating...
[ 241.396022] eth0: auto-negotiating...
[ 251.417717] eth0: auto-negotiating...
[ 261.441145] eth0: auto-negotiating...
[ 271.465569] eth0: auto-negotiating...
[ 281.488017] eth0: auto-negotiating...
[ 291.512017] eth0: auto-negotiating...
[ 301.540029] eth0: auto-negotiating...
[ 311.562958] eth0: auto-negotiating...
[ 321.584019] eth0: auto-negotiating...
[ 331.608018] eth0: auto-negotiating...
[ 341.636057] eth0: auto-negotiating...
[ 351.658266] eth0: auto-negotiating...
[ 361.680017] eth0: auto-negotiating...
[ 371.706246] eth0: auto-negotiating...
[ 381.728016] eth0: auto-negotiating...
[ 391.756025] eth0: auto-negotiating...
[ 401.780026] eth0: auto-negotiating...
[ 411.800027] eth0: auto-negotiating...
[ 421.828032] eth0: auto-negotiating...
[ 431.852020] eth0: auto-negotiating...
[ 441.876021] eth0: auto-negotiating...
[ 451.905868] eth0: auto-negotiating...
[ 461.932029] eth0: auto-negotiating...
[ 471.956021] eth0: auto-negotiating...
[ 481.977621] eth0: auto-negotiating...
[ 492.004021] eth0: auto-negotiating...
[ 502.028021] eth0: auto-negotiating...
[ 512.049302] eth0: auto-negotiating...
[ 522.073065] eth0: auto-negotiating...
[ 532.100022] eth0: auto-negotiating...
[ 542.124054] eth0: auto-negotiating...
[ 552.148021] eth0: auto-negotiating...
[ 562.172021] eth0: auto-negotiating...
[ 572.193865] eth0: auto-negotiating...
[ 582.220022] eth0: auto-negotiating...
[ 592.244023] eth0: auto-negotiating...
[ 602.265225] eth0: auto-negotiating...
[ 612.292022] eth0: auto-negotiating...
[ 622.316021] eth0: auto-negotiating...
[ 627.190880] __ratelimit: 9 callbacks suppressed
[ 627.190884] type=1503 audit(1273434775.447:15): operation="open" pid=1822 parent=1820 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 627.190910] type=1503 audit(1273434775.447:16): operation="open" pid=1822 parent=1820 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 632.337723] eth0: auto-negotiating...
[ 642.364049] eth0: auto-negotiating...
[ 652.385075] eth0: auto-negotiating...
[ 662.412022] eth0: auto-negotiating...
[ 672.436024] eth0: auto-negotiating...
[ 682.460022] eth0: auto-negotiating...
[ 692.484021] eth0: auto-negotiating...
[ 702.508022] eth0: auto-negotiating...
[ 712.532029] eth0: auto-negotiating...
[ 722.556021] eth0: auto-negotiating...
[ 732.578239] eth0: auto-negotiating...
[ 742.601030] eth0: auto-negotiating...
[ 752.624049] eth0: auto-negotiating...
[ 762.652022] eth0: auto-negotiating...
[ 772.676022] eth0: auto-negotiating...
[ 782.697971] eth0: auto-negotiating...
[ 792.720069] eth0: auto-negotiating...
[ 802.752059] eth0: auto-negotiating...
[ 812.772019] eth0: auto-negotiating...
[ 822.800021] eth0: auto-negotiating...
[ 832.820048] eth0: auto-negotiating...
[ 842.844017] eth0: auto-negotiating...
[ 852.868014] eth0: auto-negotiating...
[ 862.892013] eth0: auto-negotiating...
[ 872.916027] eth0: auto-negotiating...
[ 882.944023] eth0: auto-negotiating...
[ 892.968026] eth0: auto-negotiating...
[ 902.988017] eth0: auto-negotiating...
[ 913.012085] eth0: auto-negotiating...
[ 923.040021] eth0: auto-negotiating...
[ 933.061326] eth0: auto-negotiating...
[ 943.088059] eth0: auto-negotiating...
[ 953.112021] eth0: auto-negotiating...
[ 963.132039] eth0: auto-negotiating...
[ 973.157862] eth0: auto-negotiating...
[ 983.181442] eth0: auto-negotiating...
[ 993.205806] eth0: auto-negotiating...
[ 1003.232024] eth0: auto-negotiating...
[ 1013.253303] eth0: auto-negotiating...
[ 1023.277465] eth0: auto-negotiating...
[ 1033.304021] eth0: auto-negotiating...
[ 1043.325165] eth0: auto-negotiating...
[ 1053.352024] eth0: auto-negotiating...
[ 1063.375888] eth0: auto-negotiating...
[ 1073.397623] eth0: auto-negotiating...
[ 1083.423876] eth0: auto-negotiating...
[ 1093.448021] eth0: auto-negotiating...

E também não editei as rotas, tudo que eu tinha editado era nas configurações do IPv4, mas como vi que nas rotas têm os mesmos ítens a se preencher achei que não fosse necessário.



Não tenho muito conhecimento em Linux, mas acredito que mandei as informações de forma correta.
Obrigada pela ajuda.

pcgaldo
(usa Ubuntu)

Enviado em 10/05/2010 - 23:40h

Atualize o sistema, com o gerenciador de atualizações ou bem com o terminal.
Eu tenho o kernel 2.6.32-22-generic, mais novo que o que você tem, e a conexão wireless vai bem.

É estranho que no dmesg.log não existam registros do dispositivo. No meu caso acho estas linhas:

[ 19.521072] phy0: Selected rate control algorithm 'minstrel'
[ 19.521842] phy0: hwaddr 00:00:00:00:00:00, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 19.546312] rtl8187: Customer ID is 0x00
[ 19.546462] Registered led device: rtl8187-phy0::radio
[ 19.547257] Registered led device: rtl8187-phy0::tx
[ 19.547567] Registered led device: rtl8187-phy0::rx
[ 19.548556] rtl8187: wireless switch is on
[ 19.548603] usbcore: registered new interface driver rtl8187

Quando não conectava tinha o wireless switch em off, mas o dispositivo ficava registrado no dmesg.log.

Outro assunto misterioso é a concatenação de mensagens de auto-negotiating do dispositivo eth0. Semelha que o dispositivo SiS 191 gigabite ethernet device tem problemas de compatibilidade, dependendo da versão do kernel. Pode atopar se procura em Google:

http://www.google.com/search?hl=pt-PT&tbo=1&tbs=qdr:w&q=ubuntu+sis+191+gigabite+ethernet...

Em referência à ausência do dispositivo wireless, comprove que não tem instalado o ndiswrapper. Se o ndiswrapper está instalado, apague-o por completo.

Mire também que no arquivo /etc/modprobe.d/blacklist.conf não existe esta linha:

blacklist rtl8187

Se a linha existe, edite o arquivo com privilégios de administrador:

sudo gedit /etc/modprobe.d/blacklist.conf

Apague a linha ou comente-a assim:

#blacklist rtl8187

Junta-se a fome coas ganhas de comer...
É mui tarde aqui, vou dormir e amanhã mirarei se atopo algo mais.

pcgaldo
(usa Ubuntu)

Enviado em 13/05/2010 - 19:19h

Em referência à concatenação de mensagens de auto-negotiating, existe um problema com os dispositivos SiS 190, resolto no kernel 2.6.34, em versão release candidate, e pretendem fazer um backport a anteriores versões estáveis do kernel:

http://marc.info/?l=linux-netdev&m=126753029717458&w=2

Então, uma coisa que você pode fazer é instalar os pacotes duma nova versão do kernel. Por exemplo, as do 2.6.34-RC7:

http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.34-rc7-lucid/

Não é suportado pelo Ubuntu como o kernel padrão, mais quando se trata de uma versão não estável. Está a fazê-lo em seu próprio risco.

Instruções para a instalação:

http://www.linuxnopc.com.br/lpc/index.php?option=com_content&view=article&id=84:instalando-u...

Se algo não vai bem, você pode escolher o kernel original quando o sistema inicia, no menu do Grub e depois pode proceder à remoção dos pacotes do novo kernel.