Como descobrir qual é a minha placa de wireless no linux?

1. Como descobrir qual é a minha placa de wireless no linux?

Perfil removido
removido

(usa Nenhuma)

Enviado em 21/05/2018 - 17:12h

quero instalar o driver da minha placa de wireles, mas não sei como ver isso aqui, quando eu escrevo
ifconfig 
no terminal, o terminal me mostra isso:
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
inet 192.168.1.32 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::8648:4e9:8eec:ea9 prefixlen 64 scopeid 0x20<link>
ether fc:aa:14:fc:38:b0 txqueuelen 1000 (Ethernet)
RX packets 25291 bytes 26770445 (26.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13439 bytes 2540408 (2.5 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Loopback Local)
RX packets 657 bytes 57493 (57.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 657 bytes 57493 (57.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

vmnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.0.1 netmask 255.255.255.0 broadcast 172.16.0.255
inet6 fe80::250:56ff:fec0:1 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:01 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 90 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

vmnet8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.83.1 netmask 255.255.255.0 broadcast 192.168.83.255
inet6 fe80::250:56ff:fec0:8 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:08 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 90 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 58:10:8c:bc:d1:a5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0


como faço? agradeço!


  


2. Re: Como descobrir qual é a minha placa de wireless no linux?

Matheus
pylm

(usa Gentoo)

Enviado em 21/05/2018 - 17:20h

Se é PCI (interna) tu usa o comando lspci e se for USB tu usa lsusb.


3. Re: Como descobrir qual é a minha placa de wireless no linux?

Perfil removido
removido

(usa Nenhuma)

Enviado em 21/05/2018 - 17:35h

pylm escreveu:

Se é PCI (interna) tu usa o comando lspci e se for USB tu usa lsusb.


uso interno, meu wireless não é usb, usei este comando que tu colocou " lspci " apareceu isto:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570/8550]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)



creio que seja
 Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01) 



4. Re: Como descobrir qual é a minha placa de wireless no linux?

Ryuk Shinigami
Ryuk

(usa Nenhuma)

Enviado em 21/05/2018 - 18:02h

Algumas opções:
sudo inxi -Nn
sudo lshw -class network
sudo lspci -v | grep -A12 Network

sudo apt install inxi lshw






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts