Debian travando com SSD [RESOLVIDO]

1. Debian travando com SSD [RESOLVIDO]

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 14:21h

Então, eu uso Debian no meu notebook, um Acer Aspire E1-571-6672, ele tem 6GB de memória RAM e tinha um HD de 500GB, que recentemente eu substituí por um SSD Kingston A400 de 480GB, porem após isso o sistema ficou dando umas congeladas irritantes, tipo, ele trava, as vezes totalmente, de só mexer o ponteiro do mouse, as vezes "parcialmente" de eu ao menos conseguir minimizar a janela e tal, porem ele sempre destrava, não precisa eu forçar pra reiniciar e tal, já fiz testes no SSD pra conferir se tem defeito, e nada, já conferi o BIOS e está em AHCI, já fiz aquele coisa do trim, instalei microcode do processador e até mesmo atualizei o Kernel, e nada resolveu, eu suspeito que seja falta de algum firmware pro SSD, mas já procurei e reprocurei e não acho isso pra baixar, alguém sabe como posso resolver isso?


  


2. Re: Debian travando com SSD [RESOLVIDO]

Lima Júnior
lmJR

(usa Debian)

Enviado em 17/01/2019 - 17:38h

Uso um SSD Kingston A400 de 120gb aqui, que comprei faz cerca de 10 dias e fiz dual boot com Win10(preciso por causa dos clientes, trabalho com informática) e Debian 9 KDE, e só notei melhoras em relação ao HD de 5400rpm que usava antes.
Provavelmente deve ser algo do sistema aí, falta de firmware ou algum driver.
Se estiver afim, instala o Debian Non-free, talvez resolva.


3. Re: Debian travando com SSD [RESOLVIDO]

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 18:25h

lmJR escreveu:

Uso um SSD Kingston A400 de 120gb aqui, que comprei faz cerca de 10 dias e fiz dual boot com Win10(preciso por causa dos clientes, trabalho com informática) e Debian 9 KDE, e só notei melhoras em relação ao HD de 5400rpm que usava antes.
Provavelmente deve ser algo do sistema aí, falta de firmware ou algum driver.
Se estiver afim, instala o Debian Non-free, talvez resolva.


Todos os links da source list estão com o contrib non-free.


4. Re: Debian travando com SSD [RESOLVIDO]

Mauriciodez
Mauriciodez

(usa Debian)

Enviado em 17/01/2019 - 18:31h


Nebulosa_Gato escreveu:
Todos os links da source list estão com o contrib non-free.


non-free seria a ISO e não o repositório ... ISO + non-free no Debian significa que já vem com todos os firmware ( drivers ) instalados.

https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/9.6.0-live+nonfree/amd6...

------------------------------------------------------| Linux User #621728 |------------------------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------------------| Linux User #621728 |------------------------------------------------------




5. Re: Debian travando com SSD

Stanislaus K
StanislausK

(usa FreeBSD)

Enviado em 17/01/2019 - 18:38h

Ola,

você usa o Debian, qual versão e interface gráfica?

porque você atualizou o kernel? como você atualizou o kernel? Qual a versão do seu kernel agora?

Após um congelamento, use o comando dmesg no terminal, e mostre as mensagens para nós!

Você usa também Windows ou apenas o Debian no seu notebook? Esses congelamentos começaram em que momento específico? Após a instalação do sistema operacional no SSD? Você precisa fornecer mais detalhes...

Por exemplo, o /etc/apt/sources.list do Debian 9 deveria estar assim:

deb http://deb.debian.org/debian stretch main contrib non-free
deb http://deb.debian.org/debian-security/ stretch/updates main contrib non-free
deb http://deb.debian.org/debian stretch-updates main contrib non-free


Fonte: https://wiki.debian.org/SourcesList



6. Re: Debian travando com SSD [RESOLVIDO]

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 18:43h

Mauriciodez escreveu:


Nebulosa_Gato escreveu:
Todos os links da source list estão com o contrib non-free.


non-free seria a ISO e não o repositório ... ISO + non-free no Debian significa que já vem com todos os firmware ( drivers ) instalados.

https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/9.6.0-live+nonfree/amd6...

------------------------------------------------------| Linux User #621728 |------------------------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------------------| Linux User #621728 |------------------------------------------------------



Bom, eu instalei a versão netinstall, e nesse caso, eu não obtenho tais drivers com o comando "sudo apt install firmware-linux-nonfree"?



7. Re: Debian travando com SSD

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 18:48h

StanislausK escreveu:

Ola,

você usa o Debian, qual versão e interface gráfica?

porque você atualizou o kernel? como você atualizou o kernel? Qual a versão do seu kernel agora?

Após um congelamento, use o comando dmesg no terminal, e mostre as mensagens para nós!

Você usa também Windows ou apenas o Debian no seu notebook? Esses congelamentos começaram em que momento específico? Após a instalação do sistema operacional no SSD? Você precisa fornecer mais detalhes...

O source.list do Debian 9 deveria estar assim:

deb http://deb.debian.org/debian stretch main contrib non-free
deb http://deb.debian.org/debian-security/ stretch/updates main contrib non-free
deb http://deb.debian.org/debian stretch-updates main contrib non-free


Fonte: https://wiki.debian.org/SourcesList


Eu usava o Debian Stretch, porem atualizei pra versão testing, justamente pra ver se resolveria tal problema ao ter as coisas mais atuais, atualizei o kernel também pra ver se conseguia resolver tal problema, atualizei ele baixando, compilando e tal pelo terminal, to com a versão 4.20.2, uso apenas Debian, e começou justamente quando passei a usar o SSD, minha source.list tá assim:

deb http://ftp.br.debian.org/debian/ testing main contrib non-free
deb-src http://ftp.br.debian.org/debian/ testing main contrib non-free

deb http://security.debian.org/debian-security testing/updates main contrib non-free
deb-src http://security.debian.org/debian-security testing/updates main contrib non-free

# testing-updates, previously known as 'volatile'
deb http://ftp.br.debian.org/debian/ testing-updates main contrib non-free
deb-src http://ftp.br.debian.org/debian/ testing-updates main contrib non-free

# Debian Testing
deb http://httpredir.debian.org/debian/ testing main contrib non-free
"
A sim, quase esqueço, uso a interface xfce.


8. Re: Debian travando com SSD [RESOLVIDO]

Mauriciodez
Mauriciodez

(usa Debian)

Enviado em 17/01/2019 - 19:01h


Nebulosa_Gato escreveu:
Bom, eu instalei a versão netinstall, e nesse caso, eu não obtenho tais drivers com o comando "sudo apt install firmware-linux-nonfree"?


esse é só 1 deles .. vc pode instalar qual vc quiser, só que na ISO já vem com todos de "fábrica".

manda isso no terminal e v quantos tem
apt list *firmware* 


isso vai te listar só os que tem firmware no nome ..


------------------------------------------------------| Linux User #621728 |------------------------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------------------| Linux User #621728 |------------------------------------------------------




9. Re: Debian travando com SSD [RESOLVIDO]

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 19:04h

Mauriciodez escreveu:


Nebulosa_Gato escreveu:
Bom, eu instalei a versão netinstall, e nesse caso, eu não obtenho tais drivers com o comando "sudo apt install firmware-linux-nonfree"?


esse é só 1 deles .. vc pode instalar qual vc quiser, só que na ISO já vem com todos de "fábrica".

manda isso no terminal e v quantos tem
apt list *firmware* 


isso vai te listar só os que tem firmware no nome ..


------------------------------------------------------| Linux User #621728 |------------------------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------------------| Linux User #621728 |------------------------------------------------------



Listing... Pronto
alsa-firmware-loaders/testing,testing 1.1.3-1 amd64
alsa-firmware-loaders/testing,testing 1.1.3-1 i386
atmel-firmware/testing,testing,testing,testing 1.3-4 all
bladerf-firmware-fx3/testing,testing 0.2017.12~rc1-2 amd64
bladerf-firmware-fx3/testing,testing 0.2017.12~rc1-2 i386
bluez-firmware/testing,testing,testing,testing 1.2-4 all
dahdi-firmware-nonfree/testing,testing,testing,testing 2.11.1.0.20170917-1 all
dns323-firmware-tools/testing,testing,testing,testing 0.7.3-1 all
expeyes-firmware-dev/testing,testing,testing,testing 4.4.4+dfsg-4 all
firmware-adi/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-amd-graphics/testing,testing,testing,testing,now 20180825+dfsg-1 all [installed,automatic]
firmware-ath9k-htc-dbgsym/testing,testing,testing,testing 1.4.0-97-g75b3e59+dfsg-3 all
firmware-ath9k-htc/testing,testing,testing,testing 1.4.0-97-g75b3e59+dfsg-3 all
firmware-atheros/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-bnx2/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-bnx2x/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-brcm80211/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-cavium/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-intel-sound/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-intelwimax/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-ipw2x00/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-ivtv/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-iwlwifi/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-libertas/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-linux-free/testing,testing,testing,testing,now 3.4 all [installed,automatic]
firmware-linux-nonfree/testing,testing,testing,testing,now 20180825+dfsg-1 all [installed]
firmware-linux/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-microbit-micropython-dl/testing,testing,testing,testing 1.2.4+dfsg-1 all
firmware-misc-nonfree/testing,testing,testing,testing,now 20180825+dfsg-1 all [installed,automatic]
firmware-myricom/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-netronome/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-netxen/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-qcom-media/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-qlogic/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-ralink/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-realtek/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-samsung/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-siano/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-ti-connectivity/testing,testing,testing,testing 20180825+dfsg-1 all
firmware-zd1211/testing,testing,testing,testing 1:1.5-4 all
grub-firmware-qemu/testing,testing 2.02+dfsg1-9 amd64
grub-firmware-qemu/testing,testing 2.02+dfsg1-9 i386
hdmi2usb-fx2-firmware/testing,testing,testing,testing 0.0.0~git20151225-2 all
isight-firmware-tools/testing,testing 1.6-3 amd64
isight-firmware-tools/testing,testing 1.6-3 i386
midisport-firmware/testing,testing,testing,testing 1.2-4 all
nxt-firmware/testing,testing,testing,testing 1.29-20120908+dfsg-7 all
sigrok-firmware-fx2lafw/testing,testing,testing,testing 0.1.6-1 all
ubertooth-firmware-source/testing,testing,testing,testing 2018.12.R1-1 all
ubertooth-firmware/testing,testing,testing,testing 2018.12.R1-1 all


10. Re: Debian travando com SSD

Raphael
Nebulosa_Gato

(usa Debian)

Enviado em 17/01/2019 - 19:48h

StanislausK escreveu:

Após um congelamento, use o comando dmesg no terminal, e mostre as mensagens para nós!



Acabou de dar um congelamento, resultado do dmesg:

[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[ 0.000000] Linux version 4.20.2compilacao1 (root@usuario) (gcc version 8.2.0 (Debian 8.2.0-14)) #1 SMP Tue Jan 15 16:00:55 -03 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.20.2compilacao1 root=UUID=ee0429bb-981a-4288-aa97-ffdb74f0962c ro libata.force=noncq quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a0daffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a21b0000-0x00000000a6abefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cf5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-571/EA50_HC_HR, BIOS V2.06 10/05/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.290 MHz processor
[ 0.002706] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002707] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002715] last_pfn = 0x1cf600 max_arch_pfn = 0x400000000
[ 0.002719] MTRR default type: uncachable
[ 0.002720] MTRR fixed ranges enabled:
[ 0.002721] 00000-9FFFF write-back
[ 0.002722] A0000-BFFFF uncachable
[ 0.002723] C0000-E7FFF write-protect
[ 0.002723] E8000-EFFFF write-combining
[ 0.002724] F0000-FFFFF write-protect
[ 0.002725] MTRR variable ranges enabled:
[ 0.002726] 0 base 000000000 mask F80000000 write-back
[ 0.002727] 1 base 080000000 mask FE0000000 write-back
[ 0.002728] 2 base 0A0000000 mask FFC000000 write-back
[ 0.002729] 3 base 0A4000000 mask FFE000000 write-back
[ 0.002729] 4 base 0A6000000 mask FFF000000 write-back
[ 0.002730] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.002731] 6 base 100000000 mask F00000000 write-back
[ 0.002732] 7 base 1CF600000 mask FFFE00000 uncachable
[ 0.002733] 8 base 1CF800000 mask FFF800000 uncachable
[ 0.002733] 9 base 1D0000000 mask FF0000000 uncachable
[ 0.003434] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003550] last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[ 0.014085] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [(____ptrval____)]
[ 0.014425] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.014426] reserving inaccessible SNB gfx pages
[ 0.014431] BRK [0x13ae01000, 0x13ae01fff] PGTABLE
[ 0.014432] BRK [0x13ae02000, 0x13ae02fff] PGTABLE
[ 0.014433] BRK [0x13ae03000, 0x13ae03fff] PGTABLE
[ 0.014472] BRK [0x13ae04000, 0x13ae04fff] PGTABLE
[ 0.014475] BRK [0x13ae05000, 0x13ae05fff] PGTABLE
[ 0.014578] BRK [0x13ae06000, 0x13ae06fff] PGTABLE
[ 0.014699] BRK [0x13ae07000, 0x13ae07fff] PGTABLE
[ 0.014712] BRK [0x13ae08000, 0x13ae08fff] PGTABLE
[ 0.014757] BRK [0x13ae09000, 0x13ae09fff] PGTABLE
[ 0.014809] BRK [0x13ae0a000, 0x13ae0afff] PGTABLE
[ 0.014886] BRK [0x13ae0b000, 0x13ae0bfff] PGTABLE
[ 0.014952] BRK [0x13ae0c000, 0x13ae0cfff] PGTABLE
[ 0.015055] RAMDISK: [mem 0x36959000-0x374a3fff]
[ 0.015062] ACPI: Early table checksum verification disabled
[ 0.015285] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.015288] ACPI: XSDT 0x00000000A6FFE210 00009C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.015293] ACPI: FACP 0x00000000A6FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015298] ACPI: DSDT 0x00000000A6FEC000 00B8D6 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.015301] ACPI: FACS 0x00000000A6FBA000 000040
[ 0.015303] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015306] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015309] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015311] ACPI: APIC 0x00000000A6FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015314] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015316] ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015319] ACPI: SSDT 0x00000000A6FEA000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.015322] ACPI: BOOT 0x00000000A6FE8000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015325] ACPI: ASPT 0x00000000A6FE3000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015327] ACPI: DBGP 0x00000000A6FE2000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015330] ACPI: FPDT 0x00000000A6FE0000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015332] ACPI: MSDM 0x00000000A6FDF000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.015335] ACPI: SSDT 0x00000000A6FDE000 0009AA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.015338] ACPI: SSDT 0x00000000A6FDD000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.015346] ACPI: Local APIC address 0xfee00000
[ 0.015428] No NUMA configuration found
[ 0.015429] Faking a node at [mem 0x0000000000000000-0x00000001cf5fffff]
[ 0.015432] NODE_DATA(0) allocated [mem 0x1cf5f9000-0x1cf5fdfff]
[ 0.015459] Zone ranges:
[ 0.015460] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015461] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015462] Normal [mem 0x0000000100000000-0x00000001cf5fffff]
[ 0.015463] Device empty
[ 0.015464] Movable zone start for each node
[ 0.015464] Early memory node ranges
[ 0.015465] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.015466] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.015466] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.015467] node 0: [mem 0x0000000040200000-0x00000000a0daffff]
[ 0.015467] node 0: [mem 0x00000000a21b0000-0x00000000a6abefff]
[ 0.015468] node 0: [mem 0x00000000a6fff000-0x00000000a6ffffff]
[ 0.015469] node 0: [mem 0x0000000100000000-0x00000001cf5fffff]
[ 0.015697] Zeroed struct page in unavailable ranges: 11684 pages
[ 0.015699] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cf5fffff]
[ 0.015700] On node 0 totalpages: 1525852
[ 0.015701] DMA zone: 64 pages used for memmap
[ 0.015702] DMA zone: 156 pages reserved
[ 0.015702] DMA zone: 3996 pages, LIFO batch:0
[ 0.016350] DMA32 zone: 10507 pages used for memmap
[ 0.016351] DMA32 zone: 672448 pages, LIFO batch:63
[ 0.036821] Normal zone: 13272 pages used for memmap
[ 0.036823] Normal zone: 849408 pages, LIFO batch:63
[ 0.060280] Reserving Intel graphics memory at [mem 0xa7a00000-0xaf9fffff]
[ 0.060481] ACPI: PM-Timer IO Port: 0x408
[ 0.060482] ACPI: Local APIC address 0xfee00000
[ 0.060499] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.060501] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.060502] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.060504] ACPI: IRQ0 used by override.
[ 0.060505] ACPI: IRQ9 used by override.
[ 0.060506] Using ACPI (MADT) for SMP configuration information
[ 0.060508] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.060512] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.060536] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.060538] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.060538] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.060539] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.060539] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.060541] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.060542] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.060544] PM: Registered nosave memory: [mem 0xa0db0000-0xa21affff]
[ 0.060545] PM: Registered nosave memory: [mem 0xa6abf000-0xa6ebefff]
[ 0.060546] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[ 0.060546] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[ 0.060548] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[ 0.060548] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[ 0.060549] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.060550] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.060550] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.060551] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.060551] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.060552] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.060552] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.060553] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.060553] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.060554] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.060554] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.060555] PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff]
[ 0.060555] PM: Registered nosave memory: [mem 0xffc80000-0xffffffff]
[ 0.060557] [mem 0xafa00000-0xefffffff] available for PCI devices
[ 0.060558] Booting paravirtualized kernel on bare hardware
[ 0.060561] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.171345] random: get_random_bytes called from start_kernel+0x93/0x51c with crng_init=0
[ 0.171354] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.171655] percpu: Embedded 44 pages/cpu @(____ptrval____) s142680 r8192 d29352 u262144
[ 0.171663] pcpu-alloc: s142680 r8192 d29352 u262144 alloc=1*2097152
[ 0.171664] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.171688] Built 1 zonelists, mobility grouping on. Total pages: 1501853
[ 0.171689] Policy zone: Normal
[ 0.171691] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.20.2compilacao1 root=UUID=ee0429bb-981a-4288-aa97-ffdb74f0962c ro libata.force=noncq quiet
[ 0.175465] Calgary: detecting Calgary via BIOS EBDA area
[ 0.175470] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.192338] Memory: 5902844K/6103408K available (10245K kernel code, 1150K rwdata, 3244K rodata, 1576K init, 2396K bss, 200564K reserved, 0K cma-reserved)
[ 0.192472] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.192478] Kernel/User page tables isolation: enabled
[ 0.192491] ftrace: allocating 31774 entries in 125 pages
[ 0.205623] rcu: Hierarchical RCU implementation.
[ 0.205625] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.205626] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.205627] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.208761] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.210648] Console: colour VGA+ 80x25
[ 0.210654] printk: console [tty0] enabled
[ 0.210671] ACPI: Core revision 20181003
[ 0.210879] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.210890] hpet clockevent registered
[ 0.210896] APIC: Switch to symmetric I/O mode setup
[ 0.210966] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.211411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.230895] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f427ceeab, max_idle_ns: 440795253868 ns
[ 0.230908] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.58 BogoMIPS (lpj=9977160)
[ 0.230910] pid_max: default: 32768 minimum: 301
[ 0.230937] LSM: Security Framework initializing
[ 0.230938] Yama: becoming mindful.
[ 0.230956] AppArmor: AppArmor initialized
[ 0.232073] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.232669] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.232707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.232727] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.232937] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.232938] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.232943] mce: CPU supports 7 MCE banks
[ 0.232950] CPU0: Thermal monitoring enabled (TM1)
[ 0.232957] process: using mwait in idle threads
[ 0.232960] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.232961] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.232963] Spectre V2 : Mitigation: Full generic retpoline
[ 0.232963] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.232964] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.232972] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.232973] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.232974] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.233117] Freeing SMP alternatives memory: 24K
[ 0.234970] TSC deadline timer enabled
[ 0.234973] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.235069] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.235092] ... version: 3
[ 0.235092] ... bit width: 48
[ 0.235093] ... generic registers: 4
[ 0.235094] ... value mask: 0000ffffffffffff
[ 0.235095] ... max period: 00007fffffffffff
[ 0.235095] ... fixed-purpose events: 3
[ 0.235096] ... event mask: 000000070000000f
[ 0.235134] rcu: Hierarchical SRCU implementation.
[ 0.235880] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.235951] smp: Bringing up secondary CPUs ...
[ 0.236030] x86: Booting SMP configuration:
[ 0.236032] .... node #0, CPUs: #1 #2 #3
[ 0.242948] smp: Brought up 1 node, 4 CPUs
[ 0.242948] smpboot: Max logical packages: 2
[ 0.242948] smpboot: Total of 4 processors activated (19954.32 BogoMIPS)
[ 0.245758] devtmpfs: initialized
[ 0.245758] x86/mm: Memory block size: 128MB
[ 0.245758] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[ 0.245758] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.245758] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.245758] pinctrl core: initialized pinctrl subsystem
[ 0.247042] NET: Registered protocol family 16
[ 0.247112] audit: initializing netlink subsys (disabled)
[ 0.247117] audit: type=2000 audit(1547760532.036:1): state=initialized audit_enabled=0 res=1
[ 0.247117] cpuidle: using governor ladder
[ 0.247117] cpuidle: using governor menu
[ 0.247117] Simple Boot Flag at 0x44 set to 0x1
[ 0.247117] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.247117] ACPI: bus type PCI registered
[ 0.247117] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.247117] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.247117] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.247117] PCI: Using configuration type 1 for base access
[ 0.247130] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.247927] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.247927] ACPI: Added _OSI(Module Device)
[ 0.247927] ACPI: Added _OSI(Processor Device)
[ 0.247927] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.247927] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.247927] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.247927] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.253992] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.255344] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.255693] ACPI: Dynamic OEM Table Load:
[ 0.255701] ACPI: SSDT 0xFFFF8EBC079BB000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120215)
[ 0.256068] ACPI: Dynamic OEM Table Load:
[ 0.256073] ACPI: SSDT 0xFFFF8EBC07999000 000303 (v01 PmRef ApIst 00003000 INTL 20120215)
[ 0.256306] ACPI: Dynamic OEM Table Load:
[ 0.256310] ACPI: SSDT 0xFFFF8EBC07987600 000119 (v01 PmRef ApCst 00003000 INTL 20120215)
[ 0.256993] ACPI: EC: EC started
[ 0.256993] ACPI: EC: interrupt blocked
[ 0.257085] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.257087] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.257088] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.257089] ACPI: Interpreter enabled
[ 0.257109] ACPI: (supports S0 S3 S4 S5)
[ 0.257110] ACPI: Using IOAPIC for interrupt routing
[ 0.257134] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.257319] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.262254] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.262259] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.262323] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.262757] PCI host bridge to bus 0000:00
[ 0.262760] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.262761] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.262763] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.262764] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[ 0.262766] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.262774] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.262866] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.262876] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.262882] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.262886] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.263006] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.263032] pci 0000:00:16.0: reg 0x10: [mem 0xc0604000-0xc060400f 64bit]
[ 0.263108] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.263193] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.263215] pci 0000:00:1a.0: reg 0x10: [mem 0xc0609000-0xc06093ff]
[ 0.263299] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.263382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.263404] pci 0000:00:1b.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
[ 0.263480] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.263565] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.263706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.263813] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.263953] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.264061] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.264083] pci 0000:00:1d.0: reg 0x10: [mem 0xc0608000-0xc06083ff]
[ 0.264167] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.264248] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.264423] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.264441] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.264449] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.264457] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.264464] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.264472] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.264480] pci 0000:00:1f.2: reg 0x24: [mem 0xc0607000-0xc06077ff]
[ 0.264522] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.264595] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.264615] pci 0000:00:1f.3: reg 0x10: [mem 0xc0605000-0xc06050ff 64bit]
[ 0.264635] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.264835] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.264895] pci 0000:02:00.0: reg 0x10: [mem 0xc0430000-0xc043ffff 64bit pref]
[ 0.264923] pci 0000:02:00.0: reg 0x18: [mem 0xc0440000-0xc044ffff 64bit pref]
[ 0.264975] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.265120] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.265306] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.265363] pci 0000:02:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref]
[ 0.265573] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.265723] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000
[ 0.265779] pci 0000:02:00.2: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref]
[ 0.265985] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.266135] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000
[ 0.266190] pci 0000:02:00.3: reg 0x10: [mem 0xc0420000-0xc042ffff 64bit pref]
[ 0.266402] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 0.266615] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.266625] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.266723] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.266783] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
[ 0.266868] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.266992] pci 0000:03:00.0: supports D1 D2
[ 0.266993] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267154] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.267160] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.351242] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.351292] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.351339] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.351386] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.351433] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.351480] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.351528] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.351574] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.351675] ACPI: EC: interrupt unblocked
[ 0.351682] ACPI: EC: event unblocked
[ 0.351704] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.351705] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.351768] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.351768] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.351768] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.351768] vgaarb: loaded
[ 0.351768] pps_core: LinuxPPS API ver. 1 registered
[ 0.351768] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.351768] PTP clock support registered
[ 0.351768] EDAC MC: Ver: 3.0.0
[ 0.351768] PCI: Using ACPI for IRQ routing
[ 0.352446] PCI: pci_cache_line_size set to 64 bytes
[ 0.352568] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.352569] e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
[ 0.352570] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[ 0.352571] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 0.352572] e820: reserve RAM buffer [mem 0x1cf600000-0x1cfffffff]
[ 0.352670] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.352670] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.354915] clocksource: Switched to clocksource tsc-early
[ 0.364388] VFS: Disk quotas dquot_6.6.0
[ 0.364406] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364509] AppArmor: AppArmor Filesystem Enabled
[ 0.364527] pnp: PnP ACPI init
[ 0.364610] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.364667] pnp 00:01: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 0.364792] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.364794] system 00:02: [io 0xfd60-0xfd63] has been reserved
[ 0.364795] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.364797] system 00:02: [io 0xffff] has been reserved
[ 0.364798] system 00:02: [io 0xffff] has been reserved
[ 0.364800] system 00:02: [io 0x0400-0x0453] has been reserved
[ 0.364802] system 00:02: [io 0x0458-0x047f] has been reserved
[ 0.364803] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.364805] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.364810] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364830] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.364876] system 00:04: [io 0x0454-0x0457] has been reserved
[ 0.364880] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.447114] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.447116] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.447118] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.447119] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.447121] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.447123] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.447124] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.447126] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.447128] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.447129] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.447131] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.447135] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447334] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.447335] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.447339] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.447353] pnp: PnP ACPI: found 7 devices
[ 0.453077] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.453082] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[ 0.453084] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.453115] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff]
[ 0.453119] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb007ff pref]
[ 0.453121] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.453127] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafbfffff]
[ 0.453132] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.453140] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0580000-0xc058ffff pref]
[ 0.453142] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.453148] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.453160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.453162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.453164] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.453165] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[ 0.453167] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff]
[ 0.453168] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.453170] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.453253] NET: Registered protocol family 2
[ 0.453398] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.453426] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.453547] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.453670] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.453710] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.453737] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.453799] NET: Registered protocol family 1
[ 0.453815] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.471080] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a7 took 16848 usecs
[ 0.491071] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a7 took 19505 usecs
[ 0.491135] PCI: CLS 64 bytes, default 64
[ 0.491177] Unpacking initramfs...
[ 0.708141] Freeing initrd memory: 11564K
[ 0.708151] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.708153] software IO TLB: mapped [mem 0xa2abf000-0xa6abf000] (64MB)
[ 0.708822] Initialise system trusted keyrings
[ 0.708873] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.710158] zbud: loaded
[ 0.915419] Key type asymmetric registered
[ 0.915421] Asymmetric key parser 'x509' registered
[ 0.915437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.915465] io scheduler noop registered
[ 0.915466] io scheduler deadline registered
[ 0.915504] io scheduler cfq registered (default)
[ 0.915505] io scheduler mq-deadline registered
[ 0.915962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.915977] intel_idle: MWAIT substates: 0x21120
[ 0.915978] intel_idle: v0.4.1 model 0x2A
[ 0.916154] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.916454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.916863] Linux agpgart interface v0.103
[ 0.916910] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.916911] AMD IOMMUv2 functionality not available on this system
[ 0.917245] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.933100] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.933105] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.933295] mousedev: PS/2 mouse device common for all mice
[ 0.935678] rtc_cmos 00:03: RTC can wake from S4
[ 0.935878] rtc_cmos 00:03: registered as rtc0
[ 0.935893] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.935902] intel_pstate: Intel P-state driver initializing
[ 0.936437] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.937566] NET: Registered protocol family 10
[ 0.952443] Segment Routing with IPv6
[ 0.952502] mip6: Mobile IPv6
[ 0.952507] NET: Registered protocol family 17
[ 0.952522] mpls_gso: MPLS GSO support
[ 0.953253] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[ 0.953517] microcode: Microcode Update Driver: v2.2.
[ 0.953544] sched_clock: Marking stable (951540308, 1951331)->(973134659, -19643020)
[ 0.953711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.954667] registered taskstats version 1
[ 0.954668] Loading compiled-in X.509 certificates
[ 0.954685] zswap: loaded using pool lzo/zbud
[ 0.954797] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.955827] rtc_cmos 00:03: setting system clock to 2019-01-17 21:28:52 UTC (1547760532)
[ 0.958889] Freeing unused kernel image memory: 1576K
[ 0.987057] Write protecting the kernel read-only data: 16384k
[ 0.988476] Freeing unused kernel image memory: 2032K
[ 0.989202] Freeing unused kernel image memory: 852K
[ 1.003296] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.003297] x86/mm: Checking user space page tables
[ 1.009976] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.009977] Run /init as init process
[ 1.019606] autofs4: module verification failed: signature and/or required key missing - tainting kernel
[ 1.020305] systemd[1]: Inserted module 'autofs4'
[ 1.023776] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 1.043371] systemd[1]: Detected architecture x86-64.
[ 1.043382] systemd[1]: Running in initial RAM disk.
[ 1.048012] systemd[1]: Set hostname to <usuario>.
[ 1.118196] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.118209] systemd[1]: Reached target Slices.
[ 1.118247] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.118254] systemd[1]: Reached target Timers.
[ 1.118266] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.118299] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.118312] systemd[1]: Reached target Paths.
[ 1.118325] systemd[1]: Reached target Swap.
[ 1.118404] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.129794] lp: driver loaded but no devices found
[ 1.130853] ppdev: user-space parallel port driver
[ 1.315378] ACPI: bus type USB registered
[ 1.315403] usbcore: registered new interface driver usbfs
[ 1.315415] usbcore: registered new interface driver hub
[ 1.315446] usbcore: registered new device driver usb
[ 1.317004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.317376] ehci-pci: EHCI PCI platform driver
[ 1.318459] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.318476] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.318491] ehci-pci 0000:00:1a.0: debug port 2
[ 1.320268] sdhci: Secure Digital Host Controller Interface driver
[ 1.320269] sdhci: Copyright(c) Pierre Ossman
[ 1.321147] SCSI subsystem initialized
[ 1.321818] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 1.322395] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.322735] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000
[ 1.323102] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit
[ 1.325994] libata version 3.00 loaded.
[ 1.327430] ahci 0000:00:1f.2: version 3.0
[ 1.327640] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.334953] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.335017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 1.335019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.335021] usb usb1: Product: EHCI Host Controller
[ 1.335022] usb usb1: Manufacturer: Linux 4.20.2compilacao1 ehci_hcd
[ 1.335024] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.335181] hub 1-0:1.0: USB hub found
[ 1.335191] hub 1-0:1.0: 2 ports detected
[ 1.335500] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.335507] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.335520] ehci-pci 0000:00:1d.0: debug port 2
[ 1.337819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.337823] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.339422] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.339447] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000
[ 1.348103] scsi host0: ahci
[ 1.348279] scsi host1: ahci
[ 1.351748] scsi host2: ahci
[ 1.355016] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.355084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 1.355086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.355088] usb usb2: Product: EHCI Host Controller
[ 1.355090] usb usb2: Manufacturer: Linux 4.20.2compilacao1 ehci_hcd
[ 1.355091] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.355565] hub 2-0:1.0: USB hub found
[ 1.355575] hub 2-0:1.0: 2 ports detected
[ 1.359474] scsi host3: ahci
[ 1.360176] scsi host4: ahci
[ 1.366819] scsi host5: ahci
[ 1.366935] ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 24
[ 1.366937] ata2: DUMMY
[ 1.366941] ata3: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607200 irq 24
[ 1.366942] ata4: DUMMY
[ 1.366943] ata5: DUMMY
[ 1.366944] ata6: DUMMY
[ 1.671026] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.682895] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.683030] ata1.00: FORCE: horkage modified (noncq)
[ 1.683075] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFKB1C2, max UDMA/133
[ 1.683080] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (not used)
[ 1.683309] ata1.00: configured for UDMA/133
[ 1.691011] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.694082] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1C2 PQ: 0 ANSI: 5
[ 1.715012] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.715038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[ 1.715109] clocksource: Switched to clocksource tsc
[ 1.827814] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.827823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.828488] hub 1-1:1.0: USB hub found
[ 1.828723] hub 1-1:1.0: 6 ports detected
[ 1.847815] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.847824] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.848480] hub 2-1:1.0: USB hub found
[ 1.848552] hub 2-1:1.0: 8 ports detected
[ 2.010620] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.013852] ata3.00: FORCE: horkage modified (noncq)
[ 2.013864] ata3.00: ATAPI: Slimtype DVD A DS8A8SH, KA14, max UDMA/100
[ 2.020626] ata3.00: configured for UDMA/100
[ 2.035030] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A8SH KA14 PQ: 0 ANSI: 5
[ 2.089806] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.089820] sd 0:0:0:0: [sda] Write Protect is off
[ 2.089822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.089842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.092153] sda: sda1 < sda5 > sda2
[ 2.092549] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.114923] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.134956] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.141572] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.141578] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.141986] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.245689] usb 2-1.1: New USB device found, idVendor=0458, idProduct=0185, bcdDevice= 1.03
[ 2.245697] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.245701] usb 2-1.1: Product: Wireless Mouse
[ 2.245706] usb 2-1.1: Manufacturer: MOSART Semi.
[ 2.254418] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.259662] usbcore: registered new interface driver usbhid
[ 2.259664] usbhid: USB HID core driver
[ 2.260916] hid-generic 0003:0458:0185.0001: hiddev0,hidraw0: USB HID v1.10 Device [MOSART Semi. Wireless Mouse] on usb-0000:00:1d.0-1.1/input0
[ 2.261226] input: MOSART Semi. Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0458:0185.0002/input/input2
[ 2.261341] input: MOSART Semi. Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0458:0185.0002/input/input3
[ 2.268222] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b337, bcdDevice=13.07
[ 2.268228] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.268231] usb 1-1.3: Product: HD WebCam
[ 2.268233] usb 1-1.3: Manufacturer: HD WebCam
[ 2.319136] input: MOSART Semi. Wireless Mouse System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0458:0185.0002/input/input4
[ 2.319224] input: MOSART Semi. Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0458:0185.0002/input/input5
[ 2.319479] hid-generic 0003:0458:0185.0002: input,hiddev1,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Mouse] on usb-0000:00:1d.0-1.1/input1
[ 2.424956] random: fast init done
[ 2.501964] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.816130] systemd-journald[127]: Received SIGTERM from PID 1 (systemd).
[ 2.854266] printk: systemd: 18 output lines suppressed due to ratelimiting
[ 3.010941] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.031376] systemd[1]: Detected architecture x86-64.
[ 3.032720] systemd[1]: Set hostname to <usuario>.
[ 3.231914] systemd[1]: initrd-switch-root.service: Succeeded.
[ 3.232164] systemd[1]: Stopped Switch Root.
[ 3.232291] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 3.232353] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 3.232365] systemd[1]: Stopped Journal Service.
[ 3.232475] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.233059] systemd[1]: Starting Availability of block devices...
[ 3.264219] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.287571] systemd-journald[352]: Received request to flush runtime journal from PID 1
[ 3.465625] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input6
[ 3.465640] ACPI: Power Button [PWRB]
[ 3.465713] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input7
[ 3.465720] ACPI: Lid Switch [LID0]
[ 3.465772] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input8
[ 3.465780] ACPI: Sleep Button [SLPB]
[ 3.466110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 3.466128] ACPI: Power Button [PWRF]
[ 3.470641] ACPI: AC Adapter [ACAD] (on-line)
[ 3.551354] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 3.560872] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 3.560873] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.560874] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.560875] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 3.591075] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20181003/utaddress-213)
[ 3.591080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.591083] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[ 3.591085] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.591086] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[ 3.591088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.591089] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[ 3.591091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.591091] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.614167] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.614199] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.624670] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.630534] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 3.630557] acer_wmi: Function bitmap for Communication Button: 0x1
[ 3.636908] input: Acer WMI hotkeys as /devices/virtual/input/input12
[ 3.789760] cryptd: max_cpu_qlen set to 1000
[ 3.878969] battery: [Firmware Bug]: battery: (dis)charge rate invalid.
[ 3.879027] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 3.973118] tg3.c:v3.137 (May 11, 2014)
[ 3.984102] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address dc:0e:a1:cc:31:af
[ 3.984105] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 3.984107] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.984108] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 4.007657] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[ 4.031117] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.036373] AVX version of gcm_enc/dec engaged.
[ 4.036375] AES CTR mode by8 optimization enabled
[ 4.077083] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.080869] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.099225] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.099228] cfg80211: failed to load regulatory.db
[ 4.186307] media: Linux media interface: v0.10
[ 4.356034] videodev: Linux video capture interface: v2.00
[ 4.646719] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[ 4.673421] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[ 4.696998] psmouse serio1: elantech: Elan sample query result 04, 0b, 00
[ 4.743050] Adding 3905532k swap on /dev/sda5. Priority:-2 extents:1 across:3905532k SSFS
[ 4.791081] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b337)
[ 4.819706] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.819717] uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized!
[ 4.819720] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.819798] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[ 4.819881] usbcore: registered new interface driver uvcvideo
[ 4.819882] USB Video Class driver (1.1.1)
[ 4.825162] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 4.933189] intel_rapl: Found RAPL domain package
[ 4.933193] intel_rapl: Found RAPL domain core
[ 4.933196] intel_rapl: Found RAPL domain uncore
[ 4.933212] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 4.951833] ath: phy0: Enable LNA combining
[ 4.953079] ath: phy0: ASPM enabled: 0x43
[ 4.953081] ath: EEPROM regdomain: 0x65
[ 4.953081] ath: EEPROM indicates we should expect a direct regpair map
[ 4.953083] ath: Country alpha2 being used: 00
[ 4.953083] ath: Regpair used: 0x65
[ 4.990652] audit: type=1400 audit(1547760536.527:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=574 comm="apparmor_parser"
[ 4.991233] audit: type=1400 audit(1547760536.531:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=572 comm="apparmor_parser"
[ 4.991238] audit: type=1400 audit(1547760536.531:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=572 comm="apparmor_parser"
[ 4.991241] audit: type=1400 audit(1547760536.531:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=572 comm="apparmor_parser"
[ 4.998925] audit: type=1400 audit(1547760536.535:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=575 comm="apparmor_parser"
[ 4.998930] audit: type=1400 audit(1547760536.539:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=575 comm="apparmor_parser"
[ 4.999803] [drm] Replacing VGA console driver
[ 5.000346] Console: switching to colour dummy device 80x25
[ 5.002533] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.002535] [drm] Driver supports precise vblank timestamp query.
[ 5.003291] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.007083] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.008090] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb8dd81480000, irq=17
[ 5.011291] audit: type=1400 audit(1547760536.551:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=582 comm="apparmor_parser"
[ 5.011296] audit: type=1400 audit(1547760536.551:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=582 comm="apparmor_parser"
[ 5.011299] audit: type=1400 audit(1547760536.551:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=582 comm="apparmor_parser"
[ 5.012393] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 5.019960] [drm] LVDS was detected, not registering eDP
[ 5.125779] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[ 5.127059] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.127280] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 5.130192] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.141862] fbcon: inteldrmfb (fb0) is primary device
[ 5.633071] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[ 5.633330] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.633335] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.633340] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.633343] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.633346] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.633351] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
[ 5.633355] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 5.661917] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.662278] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.662340] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.662405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.809119] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[ 5.871180] Console: switching to colour frame buffer device 170x48
[ 5.896687] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.999705] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[ 6.003119] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7.613335] fuse init (API version 7.28)
[ 8.667526] tg3 0000:02:00.0 enp2s0f0: Link is up at 100 Mbps, full duplex
[ 8.667556] tg3 0000:02:00.0 enp2s0f0: Flow control is on for TX and on for RX
[ 8.667563] tg3 0000:02:00.0 enp2s0f0: EEE is enabled
[ 8.667611] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready
[ 56.369914] random: crng init done
[ 56.369924] random: 7 urandom warning(s) missed due to ratelimiting



11. Re: Debian travando com SSD [RESOLVIDO]

Palomo
palomo

(usa Arch Linux)

Enviado em 17/01/2019 - 20:07h

As vezes tudo pode estar certo em relaçao a drives, o SSD é um tipo de armazenamento solido onde sua leitura e escrita são superiores a de um HD normal... porem uma coisa pega muitos usuarios de linux com seus SSD...

Eu digo em relação a como o sistema se aproveita do SSD.

verifique se o Debian está com o trim ativado ('essa função remove os espaços no SSD acelerando a velocidade de leitura e escrita')
verifque como o sistema está particionado ? por exemplo ext4 é uma boa opção para HDs mas para SSD você pode usar outro sistema como f2fs ou btrfs.

E sim particionar as pastas do sistema em diversos sistemas pode constatar uma melhora de desempenho.

Se você trabalha com muitos arquivos temporarios pode ser um problema pois eles tendem a desgastar o SSD



12. Re: Debian travando com SSD [RESOLVIDO]

Stanislaus K
StanislausK

(usa FreeBSD)

Enviado em 17/01/2019 - 20:15h

Ola,

[ 56.369914] random: crng init done
[ 56.369924] random: 7 urandom warning(s) missed due to ratelimiting


Talvez a solução do seu problema seja:

$ sudo apt-get install haveged
$ sudo systemctl enable haveged
$ sudo systemctl start haveged

Leia:
https://www.linuxquestions.org/questions/debian-26/debian-hangs-at-boot-with-random-crng-init-done-4...

https://unix.stackexchange.com/questions/461425/debian-testing-takes-a-long-time-to-load-crng-init-d...




01 02



Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts